dokumendiregister.ee
OtsingAsutusedMCP
Otsing›Sotsiaalministeerium
Sissetulev kiriAvalik

Pöördumine

Sotsiaalministeerium · 10. detsember 2020
Viit
1.4-2/3584-1
Registreeritud
10. detsember 2020
Dokumendi liik
Sissetulev kiri
Adressaat
The World Health Organization
Saabumis/saatmisviis
e-post
Funktsioon
1.4 EL otsustusprotsess ja rahvusvaheline koostöö
Sari
1.4-2 Rahvusvahelise koostöö korraldamisega seotud kirjavahetus (Arhiiviväärtuslik)
Toimik
1.4-2/2020
Vastutaja
Elen Ohov (Sotsiaalministeerium, Kantsleri vastutusvaldkond, Euroopa Liidu ja väliskoostöö osakond)
Lahendamise tähtaeg
21. jaanuar 2021

Failid

  • 📎E-kiri.pdf80 KB
  • 📎Estonia_EST_SDG631_2021.xlsx
  • 📎Guidance-note-wastewater treatment_ENG_v3.docx389 KB
  • 📎jmp-2020-households-country-consultation.docx390 KB
  • 📎JMP_2021_EST_Estonia.xlsx

Sisu (failidest)

Saatja: EURO WATSAN <[email protected]> Saadetud: 10.12.2020 13:33 Adressaat: Elen Ohov <[email protected]> Koopia: Triin Uusberg <[email protected]>; SM Info <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; KÖHLER, Kristina <[email protected]>; Ms Getlyn Denks <[email protected]>; Aive Telling <[email protected]>; Greta Tischler <[email protected]>; <[email protected]>; Albreht Leena <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; ENKHTSETSEG, Shinee <[email protected]>; d.schmiege <d.schmiege@uni- bonn.de>; JOHNSTON, Richard Paul <[email protected]>; MITIS, Francesco <[email protected]>; EURO WATSAN <[email protected]> Teema: Consultation of data for Sustainable Development Goal 6 global progress reports on drinking-water, sanitation and hygiene for households and wastewater treatment Dear Ms Ohov, &nbsp; The World Health Organization (WHO) and the United Nations Childrens Fund (UNICEF), through the Joint Monitoring Programme for Water Supply, Sanitation and Hygiene (JMP), are custodian agencies to monitor global progress of implementation of the Sustainable Development Goal (SDG) targets 6.1 and 6.2 for provision of drinking-water, sanitation and hygiene services for all. JMP published a series of global reports on SDG baselines (2017) and a progress update report (2019) for WASH in households. On 16 November 2020, JMP launched the data consultation process with Member States with the aim of publishing the next edition of the progress report for WASH in households.&nbsp; &nbsp; WHO and UN-Habitat are global custodian agencies for SDG target 6.3, which calls for, by 2030, improve water quality by reducing pollution, eliminating dumping and minimizing release of hazardous chemicals and materials, halving the proportion of untreated wastewater and substantially increasing recycling and safe reuse globally. In 2018, WHO and UN-Habitat published the first report on the status of wastewater treatment, and the second global progress report is planned to be published in 2021. &nbsp; To inform the aforementioned reports, WHO and its partners prepared country estimates that are based on previous data consultations and publicly available national data sources. Herewith we kindly request you to facilitate a data consultation process by involving the responsible ministries, the national statistical office and other relevant stakeholders. We specifically request your support in the following: &nbsp; 1.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp ;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Review the draft estimates on WASH in households for SDG targets 6.1 and 6.2 and associated data sources that are presented in the enclosed country file, and provide feedback and/or additional information that can be used in updating the country estimate; and 2.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp ;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Review the draft estimate on wastewater treatment for SDG target 6.3 and associated data sources that are presented in the enclosed country file, and provide feedback and/or additional information that can be used in updating the country estimate. &nbsp; Further information and technical details on the data consultation process can be found in the enclosed guidance notes. &nbsp; Following the country consultation, we will finalize the databases and publish updated national, regional and global estimates for SDG targets 6.1 and 6.2 in May 2021 and for SDG target 6.3 in March 2021. These estimates will also be included in the UN Secretary Generals annual SDG progress report, due to be published in June 2021. &nbsp; Please send your feedback on the country files to Dr Rick Johnston () with copy to Dr Enkhtsetseg Shinee (), before 25 January 2021. In case you have any questions or clarification needs related to the consultation process, please contact Dr Johnston and Dr Shinee.&nbsp; &nbsp; We look forward to your active participation and collaboration in the country data consultation process for SDG 6 reporting.&nbsp; &nbsp; Sincerely yours, &nbsp; &nbsp; &nbsp; Dr Nino Berdzuli Director Division of Country Health Programs &nbsp; &nbsp; &nbsp; Encls: 1.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Country file for drinking-water, sanitation and hygiene in households 2.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Guidance note to facilitate country consultation on JMP estimates for drinking-water, sanitation and hygiene in households 3.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Country file for wastewater treatment 4.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Guidance note to facilitate country consultation on wastewater treatment &nbsp; &nbsp; IN HOUSEHOLDS IN HOUSEHOLDS Guidance note to facilitate country consultation on Safely t reated Domestic Wastewater estimates 2021 Global Update Table of contents TOC \o "1-3" \h \z \u 1. Background and Summary PAGEREF _Toc57703809 \h 1 2. Estimates for Safely Treated Domestic Wastewater PAGEREF _Toc57703811 \h 2 2.1 Wastewater Generated PAGEREF _Toc57703813 \h 3 2.2 Sanitation Management Chain and Safely treated Wastewater PAGEREF _Toc57703814 \h 3 3. Country consultation PAGEREF _Toc57703815 \h 6 4. Structure of the country files PAGEREF _Toc57703817 \h 6 5. Actions to take during the consultation PAGEREF _Toc57703818 \h 7 Background and Summary SDG I ndicator 6.3 aims to, by 2030, “ improve water quality by reducing pollution, eliminating dumping and minimizing release of hazardous chemicals and materials, halving the proportion of untreated wastewater and substantially increasing recycling and safe reuse globally ” . I mprov ing ambient water quality is essential to protecting ecosystem health and human health , and can be achieved by significantly reducing or eliminating different streams of pollution into water bodies. The main sources of pollution include wastewater from households, commercial establishments and industries (point sources), as well as run-off from urban and agricultural land (non-point sources). Untreated w astewater generated by households can result in the spread of pathogens and detrimental nutrient loadings in receiving waters. Wastewater generated by economic activities such as manufacturing industries may contain a variety of pollutants, including hazardous substances. SDG Indicator 6.3.1 aims to measure and track over time the percentage of wastewater flows from households, services and industrial premises that are safely treated in compliance with relevant national or local standards. The World Health Organization (WHO) and UN-Habitat serve as the custodian agencies for Indicator 6.3.1 , the “proportion of domestic and industrial wastewater flow s safely treated ” and are responsible for periodic data compilation and reporting . The indicator is reported for total wastewater, and where possible will be disaggregated into safely treated domestic and industrial wastewater flows. UN-Habitat is the custodian for data on total wastewater and for industrial wastewater, while WHO is the custodian for domestic wastewater , which includes sewage and faecal sludge from households and service industries . At present, WHO collects data only on wastewater flows from households and has used these to produce draft estimates of safely treated domestic wastewater , which represent a subset of the total volume of safely treated wastewater. The wastewater management chain (Figure 1) is used to characterise household wastewater flows from generation to collection, treatment and discharge . Wastewater from households with sewer connections or septic tanks may be considered contained when the wastewater is directed into sewer lines or impermeable storage tanks , respectively . Such sewer or septic tank wastewater can be considered collected when it reaches an urban wastewater treatment plant or an on-site leachfield ( referred to as ‘independent treatment’). Some wastewater may also be transferred from on-site containments to centralized wastewater treatment plants, through e.g. trucks. Wastewater from households without sewer connections or septic tanks is not considered to be contained or collected. Additionally, wastewater that is initially contained may be purposefully or accidently discharged to the environment through leakage or unsafe disposal practices . In settings where functional urban wastewater treatment plants do not exist, sewer wastewater may be directly discharged to the environment. Wastewater that is collected at an urban wastewater treatment plant may undergo primary, secondary, or tertiary treatment (typically in sequence) or may be discharged without treatment (for example, in the case of combined sewer overflows ) . Finally, effluent discharged from treatment plants may or may not comply with relevant national or local standards depending on the performance of wastewater treatment processes . For many countries, nationally-representative data are not measured or available to describe each of the components of the wastewater management chain and for each type of sanitation facility. As a result, WHO has strategically employed an informed set of assumptions to fill these data gaps. However, in countries where a greater proportion of the population have sewer connections than have septic tanks, country estimates are not produced without measured and nationally-endorsed data on wastewater treatment. Similarly, in countries where a greater proportion of the population have septic tanks than have sewer connections, estimates are not produced without actual data on the safe management of on-site sanitation. F igure 1. Wastewater management chain The first country estimates for Indicator 6.3.1 were published in 2018 for 79 mostly high- and middle-income countries . The estimates revealed that , among these countries, 71% of domestic wastewater flow was collected in sewers, 9% in septic tanks , and the remaining 20% w as not collected. A total of 59% of all domestic wastewater flow was collected and safely treated – 76% of wastewater collected in sewers was safely treated, compared to only 18% of wastewater collected in septic tanks. WHO and UN-Habitat are leading a global update of Indicator 6.3.1 wh ich will be published in mid- 2021. A rigorous data harvesting exercise has already been administered across all continents and countries by a team of consultants in October and November 2020 , resulting in a set of draft country estimates. Each draft country estimate has been compiled and presented in an Excel spreadsheet which documents the data , their sources, any assumptions employed to derive the estimate, and whether the estimate is based on sufficient national data to be used for the global SDG database. The se draft estimates and country files are being made available to relevant country-level representatives through January 25 , 2021 for consultation and finalisation – a process facilitated by WHO ’s R egional Offices . During the country consultation process, relevant ministries and agencies will review and consider the data and their sources while providing feedback to the WHO team – after which country estimates will be revised (as needed) and finali z ed. This guidance note has been developed to support the country consultation process alongside the draft country files . The remainder of this note describes the methodology employed for calculating the Indicator 6.3.1 estimates for safely treated household wastewater and the steps to be taken by relevant country-level representatives. E stimates for Safely T reated D omestic W astewater Estimates for safely treated household wastewater ( part of SDG Indicator 6.3.1 ) are produced in three parts – each of which is represented in its own worksheet in the corresponding country estimate spreadsheet: Part A. Volume of wastewater generated by households using different types of water and sanitation infrastructure Part B. Proportion of wastewater meeting various criteria across the wastewater management chain Part C. Calculated volumes and proportions of safely treated wastewater Wastewater Generated Table 1 presents the data sources and assumptions used to calculate the estimated volume of household wastewater generated in each country . Households with more easily accessible water supply ( accessible on the premises) are more likely to consume larger volumes of water than those that need to leave their property to collect water , and will therefore generate larger volumes of wastewater. Note that for the purposes of SDG 6.3.1, household wastewater is considered to include both blackwater ( the mixture of urine, faeces and flushwater along with anal cleansing water and/or dry cleansing materials ) and greywater (water generated from the household, but not from toilets ). In some cases, countries report the volume of wastewater generated by households. However, in the absence of such data the volume of wastewater can be estimated from national statistics on domestic water consumption . I f the se data are also unavailable, it is assumed that households with on premises water supply use 120 litres per capita per day, while those with off-premises water supply use 20 litres per capita per day. 80% of water consumed by a household is assumed to end up as wastewater (including greywater). Table 1. Description of data for the calculation of the volume of wastewater generated Data type Data source Population 2020 population estimates from the World Population Prospects 1 Proportion of population with water supply on- / off-premises JMP country estimates 2 derived for SDG Indicator 6.1 .1 Domestic water consumption for water supplies on- / off-premises National data 3 or assumptions (120 litres / capita / day for on-premises water supply and 20 l /c/d for off-premises) Sanitation facility coverage JMP country estimates 2 derived for SDG Indicator 6.2 .1 Proportion of water consumption translated into wastewater Assumption (80%) United Nations Population Division , 2019 revision ( https://population.un.org/wpp/ ) . Based on a linear regression across a set of historical data points, typically derived from nationally-representative household surveys. 2021 revision. National estimates for domestic water consumption may be applied to that for on-premises water supply if piped water supply coverage is high ( &gt;60%). Sanitation Management Chain and Safely treated Wastewater The sanitation management chain (Figure 1) is used to conceptualise household wastewater flows from collection to treatment. Where national data are missing for key steps along the chain , assumptions are utilised, as indicated in the dark blue boxes connected to each variable in F igure 2 . Volumes of safely treated wastewater are separately calculated for wastewater transported through sewer s to treatment plants , wastewater contained and treated on-site e.g. with a septic tank and leachfield , and wastewater treated off-site after temporary storage in local containments such as septic tank s – as represented in variables marked 1, 2, and 3, respectively. Containment and collection Containment refers to the ability of a wastewater system to maintain volumes of wastewater without unintended losses. Collection refers to the gathering of wastewater for subsequent treatment – either at a centralised wastewater treatment plant or some form of decentralised independent treatment (such as a leachfield receiving effluent after solids removal in a septic tank ). Septic tank emptying services and conveyance to treatment facilities remain poorly characterised, though in recent years household surveys have included questions about emptying of septic tanks and pit latrines, and subsequent removal of wastes off premises. In the absence of data to the contrary , all wastewater generated by households with sewer connections is assumed to actually enter the sewer lines , and to be ‘contained’ . On-site systems can also ‘contain’ household wastewater: s eptic tanks function to contain wastewater, remove solids, and pass effluent to a leachfield , where it infiltrates into the subsurface and the majority of biological treatment takes place. However, it is common that households report ing use of septic tanks actually have tanks that are not impermeable, or that are not connected to leachfield s , and discharge effluent directly into the environment without adequate treatment. Despite these inconsistencies in the definition and application of the term ‘ septic tank ’ , some countries do have data on the proportion of septic tanks and other decentralized wastewater management systems that effectively collect and treat wastewater. In the absence of such data , 50% of the wastewater produced by households with septic tanks is assumed to be actually contained in an impermeable tank connected to a leachfield . Wastewater generated by households with sewer connections may be lost during conveyance through the sewage system due to network leakages or overflows. The volume or proportion of wastewater collected at treatment plants is reported by some countries . For others , total wastewater treated (any type of treatment) is used as a proxy for total wastewater collected by treatment plants ( assuming that 100% of wastewater collected by the plant is treated). T he proportion of wastewater collected at treatment plants (by volume) may also be derived from estimates of the population connected to wastewater treatment services . In the absence of data on wastewater collected at treatment plants , an assumption of 100% collection (of the total contained) is applied. For septic tanks, wastewater collect ion is split into two separate streams – that collected for on-site and off-site treatment, separately . Collection for on-site treatment is a function of the proportion of tanks where : a) wastewater has been emptied and buried on-site ; and b) wastewater has not been emptied and remains contained in the tank. In the absence of data on emptying of septic tank s , 50% of septic tanks are assumed to have been emptied , and it is assumed that no wastewater has been emptied and buried on-site . C ollection for off-site treatment is a function of the proportion of tanks that have been emptied where wastewater has been taken away for disposal and the proportion of that wastewater that has been subsequently delivered to centralised treatment plants. In the absence of septic tank wastewater disposal data, 50% of septic tanks are assumed to have had their wastewater emptied and taken off-site, and all of the wastewater removed is assumed to have been delivered to wastewater plant s (either sewage treatment plants or faecal sludge treatment plants) . Treatment design and performance W astewater treatment in centralized plants may be characterised by design or by performance. Design refers to the type of treatment that the plant is designed for ( primary, secondary, or tertiary ). Performance refers to compliance with national or local standards ( e.g. for BOD 5 ). To calculate safely treated wastewater, data on performance are used where available ; otherwise design data are used. In coastal areas, p rimary treatment with a long ocean outfall also is counted as safely treated wastewater. In the absence of actual wastewater treatment performance data, it is assumed that 50% of wastewater collected at the treatment plant is safely treated. For the on-site component of the septic tank wastewater flows , wastewater not emptied, or emptied and buried on site, is counted as safely treated . E mptied wastewater that is discharged locally is considered to be entirely unsafe. W astewater that is emptied and removed off-site (e.g. using desludging truck s ), is assumed to be fully delivered to a centralised treatment plant . In countries where more people have sewer connections than have septic tanks , faecal sludge is considered to receive the same level of treatment as sewage. In countries where more people have septic tanks than have sewer connections, no off-site treatment is assumed unless national data are available . -628490 135185 + N ot emptied E mptied and buried on - site Emptied and discharged locally Emptied and removed off-site No Yes No No Yes Septic tank Sewage safely treated off-site Septic tank wastewater safely treated on-site Delivered to treatment plant Septic tank wastewater safely treated off-site 6.3.1 SAFELY TREATED WASTEWATER No Sewer Contained Collected at treatment plant Safely treated at treatment plant Yes No Yes Yes No Yes Septic tank wastewater safely treated off-site No Wastewater not safely treated Wastewater generated Contained Other sanitation facilities Figure 2 . Flows and assumptions along the wastewater management chain 100% 100% 50% 0% 50% 50% 50% 100% 0% 1 2 3 0% + N ot emptied E mptied and buried on - site Emptied and discharged locally Emptied and removed off-site No Yes No No Yes Septic tank Sewage safely treated off-site Septic tank wastewater safely treated on-site Delivered to treatment plant Septic tank wastewater safely treated off-site 6.3.1 SAFELY TREATED WASTEWATER No Sewer Contained Collected at treatment plant Safely treated at treatment plant Yes No Yes Yes No Yes Septic tank wastewater safely treated off-site No Wastewater not safely treated Wastewater generated Contained Other sanitation facilities Figure 2 . Flows and assumptions along the wastewater management chain 100% 100% 50% 0% 50% 50% 50% 100% 0% 1 2 3 0% 948055 636905 Due to the difficulty in measuring each stage of the sanitation management chain for sewer and septic tank derived wastewater, and the subsequent reliance on assumptions, criteria have been defined for the parameters that determine whether a country estimate can be calculated. For countries where sewer coverage by population exceeds that of septic tanks, there must be data on sewer derived wastewater treatment performance in order for a country estimate to be calculated. For countries where septic tank coverage by population exceeds that of sewers, there must be data on septic tank emptying in order for a country estimate to be calculated. Country consultation According to the instructions from the Inter-agency and Expert Group on SDG indicators (IAEG-SDGs) , international agencies responsible for producing country estimates on SDG indicators are expected to consult with countries on the interpretation and use of country data in global estimates. The country consultation is a process whereby WHO seek s feedback from national authorities on the country files and draft estimates for safely treated domestic wastewater . It is therefore important that relevant country authorities understand the essential elements of the country file and estimation methods in order to effectively provide feedback through this consultation. The purpose of the consultation is not to compare national estimates but rather to review the completeness or correctness of the data in the country file and to verify its interpretation. WHO Country Offices are not expected to undertake complex analysis, or to review the estimation methodology, but simply to support national authorities to identify any missing data sets and to provide feedback on the interpretation and classification of existing data. Country Offices are best placed to know which sectoral ministries should be consulted (sanitation, environment , regulators, and/or utilities ) but in all cases it is important to engage with the National Statistics Office which is the national counterpart of IAEG-SDGs and tasked by the UN General Assembly to oversee the global monitoring . In addition, some countries have identified focal points for SDG 6, or for SDG target 6.3, which should be engaged in the consultation process . Structure of the country files The SDG 6.3.1 country files ( Excel spreadsheet s) have a series of tabs as described below : Wastewater generated – Summary of data points related to the calculation of wastewater generated , including population coverage for on- and off-site water supply and corresponding estimates of domestic water consumption, and subsequently the estimation of wastewater generated for each type of sanitation facility ; Wastewater management chain – Summary of data points related to the wastewater management chain for sewers and septic tanks, separately. Safely treated wastewater – Summary of the calculations for the volume of wastewater collected and proportion s safely treated for each of the three wastewater streams (sewer with off-site treatment, and septic tank with on and off-site treatment, separately) ; Variables used – A summary of all the variables and assumptions utilised for the 6.3.1 calculation and their respective details – such as year, data source, and any accompanying notes; Variables reported – A collection of all the data found to have been reported in national statistics during recent data harvesting exercises for each country. Note that some of the variables reported might not be used. For example, where data are reported for multiple years, only the most recent data points are used for Indicator 6.3.1 calculations. -43815 390525 Variable ID code (referenced in the ‘ Variables used’ worksheet and/or in the description of calculations The type of statistic A – Assumption C – Calculation E – Estimation R – Reported data Value associated with the estimate/variable Figure 3 . Data point legend 0 0 Variable ID code (referenced in the ‘ Variables used’ worksheet and/or in the description of calculations The type of statistic A – Assumption C – Calculation E – Estimation R – Reported data Value associated with the estimate/variable Figure 3 . Data point legend Each data point in the country file is represented in a box with three components, as shown in Figure 3 . Actions to take during the consultation The country consultation should focus on the ‘ Variables used’ worksheet which lists those sources of data that are contributing to the 6.3.1 country estimate . It is also useful to review the ‘Variables reported’ worksheet which refers to additional sources of data that have been compiled . The consultation should focus on three main questions: Is the country file missing any relevant national sources of data on domestic water consumption or components of the wastewater management chain (such as septic tank emptying or wastewater treatment performance ) ? If the country file is missing any relevant sources of data, the WHO team will be grateful to receive these data and include them to update the estimates. For example, if data on wastewater treatment are missing from the country file but available from national partners, these could potentially be used to calculate and report on the indicator , or they may transform an invalid country estimate (due to lack of data) into a valid one . Are the data sources listed as used considered reliable and suitable for use as official national statistics? If any of the data sources listed in the ‘ Variables used ’ worksheet are not considered to be reliable and suitable for use in calculating the SDG indicators, please inform the WHO team. Data points can be excluded for global estimates if they are unsuitable, unreliable or simply incorrect. Is the interpretation and classification of the data extracted from national sources accurate and appropriate? Finally, if the data extracted from the listed sources (shown in detail on the ‘ Variables used ’ worksheet ) has not been accurately extracted or interpreted, please inform the WHO team. In some cases, data extracted might have been misinterpreted or misclassified by the WHO team, and therefore will require correction. Note that the Country Files contain formulas and links. W e kindly ask you to not work directly in the MS Excel worksheets but rather provide data for consideration including its source in an additional document to the WHO team so they can insert the data into its database accordingly. Results of the consultation should be shared with the WHO country and regional offices, and copied to [email protected] . Please note that the final deadline for feedback from country consultations is 25 January 202 1 . right -4445 center 5080 309880 -4445 Joint Monitoring Programme for Water Supply, Sanitation and Hygiene Guidance note to facilitate country consultation on JMP estimates For drinking water, sanitation and hygiene in households November 2020 Table of contents TOC \o "1-3" \h \z \u 1. Background PAGEREF _Toc54787544 \h 1 2. JMP estimates for basic and safely managed services PAGEREF _Toc54787545 \h 1 2.1 Drinking water PAGEREF _Toc54787546 \h 2 2.2 Sanitation PAGEREF _Toc54787547 \h 2 2.3 Hygiene PAGEREF _Toc54787548 \h 2 3. JMP estimation methods PAGEREF _Toc54787549 \h 2 4. Country consultation PAGEREF _Toc54787550 \h 3 5. Structure of the JMP country files PAGEREF _Toc54787551 \h 4 5.1 ‘Ladders’ for the most recent estimates PAGEREF _Toc54787552 \h 4 5.2 ‘Basic Charts’ (Charts B) PAGEREF _Toc54787553 \h 4 5.3 ‘Safely managed charts’ (Charts SM) PAGEREF _Toc54787554 \h 4 5.4 ‘Estimates’ PAGEREF _Toc54787555 \h 4 5.5 ‘Data Summary’ PAGEREF _Toc54787556 \h 4 6. Actions to take during the consultation PAGEREF _Toc54787557 \h 5 Background The WHO/UNICEF Joint Monitoring Programme for Water Supply, Sanitation and Hygiene (JMP) was established in 1990 and has been instrumental in developing global norms and standards to enable benchmarking of progress on drinking water, sanitation and hygiene (WASH). Following agreement of the 2030 Sustainable Development Agenda by UN member states, the Inter-Agency &amp; Expert Group on SDG Indicators identified WHO and UNICEF through the JMP as the custodian agencies responsible for compilation and reporting on the official global indicators for Sustainable Development Goal targets for drinking water (6.1 .1 ), sanitation and hygiene (6.2 .1a and 6.2.1b ). The JMP produce s comparable estimates of progress at country, regional and global levels based on official national data. The most recent JMP report on WASH in households, “ Progress on household drinking water, sanitation and hygiene 2000-2017: Special focus on inequalities ” , drew upon 4,861 data inputs , most of which were collected directly from published reports of national authorities, including statistical offices, ministries, and regulators. Every two years t he JMP updat es its global database s to incorporate the latest available national data for the global SDG indicators , and is preparing the update of the WASH in households database . The JMP is committed to consulting national authorities on the estimates generated from national data sources through a country consultation process facilitated by WHO and UNICEF country offices . The country consultation aims to engage national statistical offices and other relevant national stakeholders to review the draft estimates and provide technical feedback to the JMP team . This guidance note is designed to support the country consultation on updated estimates of WASH in households produced by the JMP , which will be held from 23 November 2020 to 25 January 202 1 . Following the country consultation the JMP will finalize the database and publish updated national, regional and global estimates for SDG targets 6.1 and 6.2 in May 20 21 . These estimates will also be included in the UN Secretary General ’s annual SDG Progress Report , due to be published in June 20 21 . JMP estimates for basic and safely managed services JMP estimates are based on a simple classification of drinking water sources and sanitation facilities into improved and unimproved types. This information is widely available from national household surveys, censuses and administrative systems. For MDG reporting the JMP estimated the proportion of population using improved and unimproved types of facilities. For SDG reporting the JMP uses information on service levels to further classify improved facilities into three categories: ‘limited’, ‘basic’ or ‘safely managed’ services as shown below in F igure 1 . JMP estimates of the population using ‘safely managed’ drinking water and sanitation services and ‘basic’ hygiene services are used for global tracking progress towards SDG targets 6.1 and 6.2. JMP estimates of the population using ‘basic’ water, sanitation and hygiene services are also used for global tracking of progress towards SDG target 1.4. Figure 1. JMP service ladders for monitoring drinking water, sanitation and hygiene Drinking water Households using improved drinking water sources which are located on premises, with water available when needed, and free from contamination , are classified as having ‘safely managed services’. Households not meeting all of these criteria, but using an improved source with water collection times of no more than 30 minutes per round trip are classified as having ‘basic services’, and those using improved sources with water collection times exceeding 30 minutes are classified as ‘limited services’. Sanitation Households using improved sanitation facilities which are not shared with other households are classified as having ‘basic’ services, and those using improved sanitation facilities shared with other households are classified as having ‘limited’ services. To be classified as ‘safely managed’ households must use an improved sanitation facility which is not shared and where excreta are either safely disposed in situ or removed off-site and treated. Sewage that undergoes at least secondary treatment (or primary treatment with a long ocean outfall) will be considered as ‘safely manged’ , though non-specific information such as “wastewater treated” will not be used for the estimates. Information on faecal sludge management can include containment, emptying, delivery to treatment and treatment with appropriate technologies. Hygiene Handwashing with soap and water has been identified as the top priority for improving hygiene. The presence of a hand washing f acility with soap and water available is the closest measurable proxy for handwashing in households and has been selected as the global indicator for monitoring progress on hygiene under SDG 6.2. This proxy measure is increasingly included in household surveys, and represents a more reliable indicator than self- reported handwashing behaviour. For global reporting the JMP uses national surveys to estimate the proportion of households with a handwashing facility with soap and water available at home. JMP estimation methods The JMP generates rural, urban and national estimates for each country by drawing a line of best fit between all available data points. Simple linear regression using the least squares method of minimizing the variability of the data points is used to estimate the proportion of the population using each of the following facility types for a given reference year between 2000 and 2020 : Improved drinking water Improved within 30 minutes (basic or safely managed) Improved over 30 minutes (limited) Unimproved water Surface water Improved sanitation Improved and not shared (basic or safely managed) Improved and shared (limited) Unimproved Open defecation Handwashing facility with soap and water Facility observed with soap and water available Facility without soap or water No facility To calculate safely managed drinking water the JMP estimates the proportion of improved drinking water sources (piped and non-piped) which are: on premises, available when needed, and free from contamination. These values are multiplied by the proportion of the population using improved drinking water sources, to calculate the population using improved water sources that are on premises, available when needed, and free from contamination. Finally, the JMP uses the minimum of these three values (or two values if either accessibility or availability are missing) to estimate coverage of safely managed drinking water services. To calculate safely managed sanitation the JMP estimates the proportion of improved sanitation facilities not shared with other households (sewer connections, septic tanks and other improved facilities such as improved pit latrines) from which excreta are safely disposed in situ (contained and not emptied, or emptied and buried on site), or removed from the home through sewer lines and treated at a treatment plant, or emptied from non-sewered facilities, transported to a treatment plant and treated. The proportion reaching treatment is adjusted based on the proportion of wastewater and faecal sludge treated. While the data required to estimate access to basic WASH services are readily available for most countries, the JMP has not always been able to find the data required to estimate safely managed drinking water and sanitation services. The JMP will only make an estimate if data are available for at least 50% of the relevant population and will indicate the completeness of the data underlying each country estimate. Country consultation According to the instructions from the IAEG-SDGs, international agencies responsible for producing country estimates on SDG indicators are expected to consult with countries on the interpretation and use of country data in global estimates and reports. The JMP country consultation is a process whereby WHO and UNICEF seek feedback from national authorities on the JMP country files and estimates of progress in drinking water, sanitation and hygiene. It is therefore important that relevant country authorities understand the essential elements of the JMP country file and estimation methods in order to effectively provide feedback through this consultation. JMP global and regional estimates are derived by aggregating country trends so establishing comparable estimates of progress across countries is paramount. Because the JMP applies a common methodology across all countries its estimates often differ from government estimates which use different definitions and/or methods. The JMP methodology is rooted in estimates of which water and sanitation facilities are used by households, and gives preference to population-based sources of data such as censuses and household surveys, over administrative records which may be based on infrastructure coverage. However, data from infrastructure-based databases will be essential for other aspects of SDG indicators such as drinking water quality and wastewater treatment. The purpose of the consultation is not to compare JMP and national estimates of WASH coverage but rather to review the completeness or correctness of the datasets in the JMP country file and to verify the interpretation of national data in the JMP estimates. WHO and UNICEF country offices are well-placed to ensure coordination and effective division of labour. Country Offices are not expected to undertake complex analysis, or to review the estimation methodology, but simply to support national authorities to identify any missing data sets and to provide feedback on the interpretation and classification of existing data. Country Offices are best placed to know which sectoral ministries should be consulted (water, sanitation, health, environment) but in all cases we encourage you to engage with the National Statistics Office which is the national counterpart of IAEG-SDGs, the body tasked by the UN General Assembly to oversee the global monitoring, and therefore will be primarily responsible for SDG reporting at the national level . Structure of the JMP country files The JMP country files have been updated to address the expanded scope and ambition of the SDG targets and the Excel spreadsheet has a series of tabs but for ease of reference the front page includes links to the key tabs as described below: ‘Ladders’ for the most recent estimates This tab displays drinking water, sanitation and hygiene ‘ladders’ used by the JMP for global monitoring purposes. The ladders show the latest rural, urban and national estimates for the year 2020 . Summary estimates are tabulated below as they will appear in the statistical tables at the back of the planned JMP 2021 report. ‘ Basic Charts’ (Charts B) This tab includes charts showing estimated trends in the use of ‘basic’ drinking water, ‘basic’ sanitation, ‘basic’ hygiene services and open defecation since the year 2000. These charts illustrate the JMP method of using a linear regression of available data points to generate estimates for any given reference year between 2000 and 2020 and highlight differences between previously published estimates of ‘improved’ and new estimates of ‘basic’ services. ‘Safely managed charts’ (Charts SM) This tab summarises the data used to estimate use of ‘safely managed’ drinking water and ‘safely managed’ sanitation services. It includes charts showing estimated trends in the major types of facilities used by households i.e. piped versus non-piped improved drinking water sources, and sewer connections versus septic tanks and other types of improved sanitation facilities. It also includes charts showing estimated trends in the main elements of ‘safely managed’ services. The drinking water chart shows the proportion of improved drinking water sources which are located on premises, available when needed, and free from contamination. The sanitation chart shows the proportion of population using sanitation facilities from which excreta are disposed in situ, and faecal sludge and sewage which are removed and treated. ‘Estimates’ This tab provides estimated values for limited and basic services, as well as for elements of safely managed services. Improved water sources are disaggregated into piped and non-piped sources, while improved sanitation facilities are disaggregated into sewer connections, septic tanks, and improved latrines. Individual elements of safely managed drinking water (on premises, available, and quality) are shown separately, along with the overall estimate of safely managed drinking water, which is the minimum of the three elements. Individual elements of safely managed sanitation (excreta disposed in situ, faecal sludge treated, sewage treated; all excluding shared sanitation) are shown, along with the overall estimate of safely managed sanitation, which is the sum of the three elements. Estimates are provided for rural, urban and national areas, alongside population estimates from the UN Population Division. Estimates are generated for all years possible from 2000 through 2020 . ‘Data Summary’ This tab provides a comprehensive list of all national data sources used in the production of JMP country estimates in chronological order. It shows which sources are used to derive each value and whether they are surveys, censuses or administrative sources. For more detailed information on how data extracted from each of these sources has been classified by JMP see ‘Water data’, ‘Sanitation data’, ‘Wastewater data’, and ‘Hygiene data’. Actions to take during the consultation The country consultation should focus on the Data Summary tab which lists those sources of data on drinking water, sanitation, and hygiene which have been collected to date. The consultation should focus on three main questions: Is the country file missing any relevant national sources of data on drinking water, sanitation and hygiene in households that would allow for a better estimate? If the country file is missing any relevant sources of data, the JMP team will be grateful to receive these data and include them to update the estimates. For example, if data on drinking water quality are missing from the country file but available from national partners, these could potentially be used to calculate and report on the indicator for Safely Managed Drinking Water services. Are the data sources listed considered reliable and suitable for use as official national statistics? If any of the data sources listed in the Data Summary tab are not considered to be reliable and suitable for use in calculating the SDG indicators, please inform the JMP team. Data points can be excluded for global estimates if they are unsuitable, unreliable or simply incorrect. Is the JMP interpretation and classification of the data extracted from national sources accurate and appropriate? Finally, if the data extracted from the listed sources (shown in detail on the ‘Water Data’, ‘Sanitation data’, ‘Wastewater data’, and ‘Hygiene data’ tabs) has not been accurately extracted or interpreted, please inform the JMP team. In some cases, data extracted might have been misinterpreted or misclassified by the JMP team, and therefore will require correction. Note that the Country Files contain formulas and links. Due to the statistical modelling approach used, we kindly ask you to not work directly in the MS Excel worksheets but rather provide data for consideration including its source in an additional document to the JMP team so they can insert the data and run the models accordingly. Results of the consultation should be shared with the WHO and UNICEF country and regional offices, and copied to [email protected] . Please note that the final deadline for feedback from JMP country consultations is 1 8 January 202 1 .
Allikas: Sotsiaalministeerium dokumendiregister →
dokumendiregister.eeAsutusedEesti avalike dokumendiregistrite otsing · nimistu.ee andmetel