dokumendiregister.ee
OtsingAsutusedMCP
Otsing›Sotsiaalministeerium
Sissetulev kiriAvalik

Proposal and solution

Sotsiaalministeerium · 24. august 2020
Viit
1.4-2/2501-1
Registreeritud
24. august 2020
Dokumendi liik
Sissetulev kiri
Adressaat
Aristo Telemed AG
Saabumis/saatmisviis
e-post
Funktsioon
1.4 EL otsustusprotsess ja rahvusvaheline koostöö
Sari
1.4-2 Rahvusvahelise koostöö korraldamisega seotud kirjavahetus (Arhiiviväärtuslik)
Toimik
1.4-2/2020
Vastutaja
Triin Uusberg (Sotsiaalministeerium, Kantsleri vastutusvaldkond, Euroopa Liidu ja väliskoostöö osakond)

Failid

  • 📎2020-03-12 CV Detailed CV english with Photo complete.pdf423 KB
  • 📎E-kiri.pdf88 KB
  • 📎Monitoring of rooms and medical equipment and tracking of persons based on RFID technology.pdf462 KB
  • 📎Offer and solution description.pdf193 KB

Sisu (failidest)

CV Dr.-Ing. Guenter Braun From 2010 to 2012 Aristo Telemed had developed a telemedicine-supported method for the diagnosis and treatment of the Chronic Kidnev Disease (CKD) at early stages in a project that had been partially funded by the Bavarian Health Ministry. The development was based on literature by the National Kidney Foundation (USA), USRDS Annual Data Reports, NHS (UK) reports and medical guidelines from different countries as well as discussions with a family doctor in Ingolstadt and nephrologists in Ingolstadt and Munich. Later it had been refined and translated to English. In December 2019 Guenter Braun had a phone call with Aristo Telemed’s representative in the United States who suggested to submit our proposals for CKD first to Canadian provinces. After that he will be available to address private insurances in the United States and finally the Centers for Medicare and Medicaid Services. Guenter Braun had also established excellent contacts to Canada supported by the Canadian trade commissioner to Germany and based on Alberta-Bavaria workshops in Munich 2018 and 2019. Canada also seemed to be interested to participate in the harmonization of social laws in the EU based on the free trade agreement CETA between Canada and the European Union In January 2020 he had been asked by the Centers of Medicare and Medicaid Services to nominate himself for a CMS Expert Panel for the development of a Quality Measure Assessing Delay in Progression of the Chronic Kidney Disease at Yale University which he did. That had also been part of the project for the Bavarian Health Ministry. In March 2020 he started to submit proposals for a telemedicine-supported method for the diagnosis and treatment of the Chronic Kidney Disease at early stages to governments of Canadian provinces. Regarding the „Digitization” in healthcare and care for elderly persons, Aristo Telemed (AT) supported and in many cases still supports startups and established companies from Canada, Germany, Hungary, Israel, Latvia, Poland, Russia, Ukraine and the USA regarding international healthcare market access for  a fall sensor for seniors, that provides an alarm to a predefined phone in case of an unintended fall.  a method for non-invasive treatment of ADHD in children who show verbal and learning deficits  an intelligent electronic stethoscope for use by an MD or at home that is synchronized with a smartphone e.g. for the early detection of lung infections. It analyzes the recorded sounds, can detect abnormalities and transmits the sounds and its suggested diagnosis to the patient’s MD for further consultation.  An innovative RFID chip that can be attached to medical devices and surgical instruments which tolerates high temperatures that are applied in sterilization processes. That chip helps personnel in hospitals to find medical devices and surgical instruments in hospitals easier. Worn on a bracelet by patients it helps finding those patients in hospitals if required.  An innovative method to investigate arteries and veins in order to avoid heart attacks and strokes.  Further health apps e.g. for the support of psychiatric patients will follow soon.  A comparative study regarding different methods for an early detection of prostate cancer had been prepared together with medicine professors in Cologne, Aachen and Hamburg will be started soon. A high-ranking member of the German organization to which we will submit it had already told me that they intend to fund that research as soon as the request will be submitted. In 2013 Guenter Braun had developed and proposed a modern governing structure for the German Health system but nobody seemed to be interested. So he decided to become a candidate for the elections to the European parliament 2019 and was nominated as a candidate by the CSU in November 2018. In April 2019 Guenter Braun had discussed differences between the Austrian and German Social Laws with the deputy director of the Main Association of Austrian Social Security Institutions whom he had known since the introduction of the e-card in Austria in 2005 and the joint participation at the WSIS 2005 in Tunis in autumn 2005. However, he did not believe that the German or Austrian social law can be a role model for other EU countries. He had been invited to the upbeat of the election campaign in Schrobenhausen on April 29th 2019 with Manfred Weber (the leader of the E.P.P) and Prof. Angelika Niebler for the elections to the European parliament. He had been interviewed on stage in front of some 1,000 CSU members and said he would like to harmonize social laws in the EU member states to avoid barriers in the European Economic Area so that all EU member states can participate equally in advances in healthcare. In detail he suggested to introduce a modern management structure in European healthcare based on goals similar to what he had developed and introduced successfully with his team at Siemens AG worldwide almost 20 years ago and which (business development) and he had lectured at Munich University and the University for Applied Sciences Cologne from 2012 to 2018. Even though the instruments (e.g. balanced scorecards) are the same, the goals in healthcare would not be profit or company value but the quality of life and the healthy life years of the population in the EU member states. That was very well received by the audience. Later he supported Manfred Weber and Angelika Niebler in their campaign with these personal goals (in German) that he sent to all Bavarian MDs networks, hospitals, health insurers and medium-sized companies and achieved an excellent result for the CSU in Bavaria. At the end of the rally event for the European parliament in Munich with Manfred Weber and several European heads of state to which he was invited again, Angelika Niebler told him that we will soon meet again (in Brussels). In October 2019 the office of the EU commission asked him to apply with his professional CV as an advisor to the EU commission which he did. The process should be completed with an interview in Brussels maybe in spring 2020. Still another project will also be started soon. Its purpose is to make sure that a patient can at all times reach his family doctor by telephone. This is particularly important with single practices in rural areas and could certainly be exported to many countries. In April 2009 Dr. Braun founded the Aristo Telemed AG (AT). He holds all 50,000 shares of the company. In 2008 Dr. Braun was elected head and project manager of the National German Project Group „ProTelemonitoring“ at the VDE in Frankfurt with all important stakeholders of the industry, including several large health insurers, university hospitals, MDs, the German Health Ministry, and the federal joint committee who decides what German health insurers must compensate. The project group determined the benefits of telemedicine/telemonitoring support for patients with severe chronic diseases in a metastudy for the BMBF (German Ministry for Education and Research). The evaluation of benefits and proposals for the compensation of telemedicine were provided for diabetes, chronic heart failure, chronic wounds and COPD. A brochure with the results can be obtained from the VDE. In 2007 he left Siemens as ICN Enterprise Systems should be sold to an unknown buyer. It had already significantly reduced investments and development expenses and had sold its campus in Santa Clara/California to achieve a positive result. A separate spin-off of his group that would have been financed by a well-known international investor based on a positive due diligence was opposed by his peer as it was said that Healthcare Solutions was „the pearl of the company“, and without it ICN Enterprise Networks could not be sold at all. Two meetings with the Siemens president Heinrich von Pierer were positive but he said he needed to ask the board of directors for their consent. The following meeting of the board of directors end of January 2007, however, was focused on the Siemens bribery affair only and did not decide about the sales of the Healthcare Solutions Unit. So he and also all members of his team left Siemens. In 2002 he had suggested his peer to start a new business field at Siemens ICN Enterprise Networks that should care about the upcoming use of ICT in healthcare systems. His boss reacted promptly and asked him to build and lead the new unit. If he did he could be relieved of some of his other responsibilities to date as he wanted. He also got permission to hire suitable personnel from any Siemens organization for his new unit. The new business unit “Healthcare Solutions” started operations beginning of 2003 while he kept contact with the universities (CAMPUS), Fraunhofer and the eFinance Lab, and the Siemens customers as much as possible. Responsibilities of the global Business Unit Healthcare Solution were business planning, turnover, and results as well as the support of 40 national Siemens ICN units regarding customer support, sales, project management, and services. Talks and negotiations with high-ranking deciders of governments or important health institutions, e.g. the government of Slovenia, the US Department of Health and the speaker of the House of Representatives Newt Gingrich in Washington D.C. USA on interoperability issues between European and US electronic health records, the board of Health Infoway Canada in Toronto, the Director of the NSW Cabinet Office Roger Wilkins in Sydney, the Director of Health in New Orleans Dr. Kevin Stephens, and the board of the VHA Southwest in Dallas were part of his job. In New Orleans he had been interviewed by Lousiana TV together with his US team member and Dr. Stephens regarding the benefit of electronic health cards which was transmitted nationwide. For his stays in the US he had an office in Malvern, Pennsylvania. Since 2002 he had also been involved with the introduction of eHealth (HealthIT) in Germany (eGK, ePA), Austria (ecard) and Switzerland. In that context he had also met several top politicians from different German “Bundesländer” including Ursula von der Leyen at different fairs. At that time she was Minister for Health in Niedersachsen. For his regular talks with the German Health Ministry he could use a Siemens office in Berlin at the Gendarmenmarkt. In November 2005 he represented Siemens together with a member of the Siemens board at the World Summit on IT in Tunis (WSIS 2005). In 2000 he had been selected by Siemens ICN for leading a new field “innovation management” at the division for cooperation with universities and research organizations that was regarded necessary by the Siemens board. Focus was on Germany and the US, e.g. Georgia Tech Atlanta, SCR Princeton, UC Berkeley and others. He gave a well-received lecture on his experience with business consultants at the Wharton Business School (University of Pennsylvania). Together with different Siemens board members he became a member of the steering committees of the technical universities Munich and Berlin, met regularly with several German universities and research organizations, e.g. Fraunhofer (CAMPUS-Meetings). He became also responsible for the evaluation of innovative ideas by startup companies for Siemens Venture Capital. There was a partial overlap of these tasks with his responsibility for business strategy. 1997 he joined the business communications division of Siemens where he became responsible for business strategy and business development. With his department, he was given global responsibility for the Siemens ITC strategy in all countries where Siemens ICN operated. With his new department he became responsible for market analysis, business strategy, strategic and operative planning, business development, benchmarking, target agreements for all managers, and the development and ongoing maintenance of balanced scorecards, internal and external communication of goals, strategy and customer benefits as well as total quality management issues. His responsibility also included presentations and discussions with Siemens customers and their worldwide organization JUST (Joint Users of Siemens Technology). It included many large companies in various countries. In particular he often met and discussed with Swiss enterprises including the Central Swiss Power Plants and several large banks. He was also a founding member of the eFinance Lab at Frankfurt University. From 1986 to 1997 he worked for Daimler-Benz Aerospace in the satellite business (Dornier Satellite Systems, today Airbus Space and Defense) where he was responsible for advanced antenna and microwave technologies, innovations, sales and strategy in satellite communications and earth observation technologies, and planning of planetary missions (e.g. Cassini/Huygens) in two branches of the company in Southern Germany. Regarding SAR antennas for earth observation and planetary missions he negotiated with the JPL Pasadena. With his department, he led and submitted various successful proposals to ESA/ESTEC, and the German Research Ministry regarding advanced satellite antennas and microwaves. Within the EU he participated in COST (Cooperation in Science and Technology) meetings in various EU countries. He was also successful with a proposal to the US Department of Defense for planning a Space Shuttle mission to test and establish a measurement method to detect the launch of missiles and rockets. He also established mm-wave technologies at his department. On that basis his department successfully submitted proposals for satellite missions for environmental measurements e.g. ozone and trace gases in the atmosphere and on ground. Considering that various technologies for space applications could also be used to solve challenges in other industries, he convinced the CEO to make an according announcement in the company which led to several interesting results. The winner was the usage of rotating SAR antennas on helicopters which was then built and tested by Eurocopter and showed promising results for obstacle warning of helicopters even under bad weather conditions. Therefore it had the potential to significantly reduce the number of fatal helicopter accidents often caused by collisions with wires and other obstacles. The solution “Heliradar” was submitted by several organizations to the German President’s office and selected as one of five candidates for the German Future Award 1997 (Deutscher Zukunftspreis). G. Braun published the results of his research in various national and international research magazines and presented those on various international symposia in Europe and the US. On one of these occasions he received the privilege of a personal guided tour through the Hughes Corp. in Los Angeles. Hughes was the world’s largest satellite manufacturer, and the tour included the impressive satellite integration facility. Finally, in 1997 he proposed a strategy to develop and market a new generation of communication satellites and was supported by about 40 DSS executives, the German Research Ministry and the DSS employee organization. As the CEO denied to accept the strategy and as he had a good job offer from Siemens, he left Dasa/DSS (1997). From 1982 to 1986 he worked as a Research Fellow and Associate Professor at the University of the Bundeswehr in Neubiberg near Munich. His research and development activities included mobile communications, radar and medical technologies. For his research on noise optimization of oscillators in mobile communications and radar systems he received the Dr.-Ing. degree with summa cum laude in 1985. He presented his findings at the 1986 lEEE International Symposium on Circuits and Systems in San Jose/California. 1974 to 1982 he worked for Siemens in Munich. Before he started 1977 working for Siemens in the development of radio relay systems (2 to 15 GHz) and research on innovative semiconductor chips for radio systems (MMICS etc.), Siemens had offered him a two-year trainee program (Ingenieurkreis) where he was given the opportunity to work in different divisions of the company which he could choose himself. Starting 1974, he chose to work on new semiconductor and printed circuit technologies, the product management of a new radio relay system, and the sales of radio relay systems in Africa and Southeast Asia. Negotiations with customer organizations took place in London and Tripolis/Libya. He left Siemens 1982 to proceed with research work on his intended Dr.-Ing. degree. Guenter Braun had studied Electrical and Electronics Engineering at the Technical University Munich, Germany and Southampton University, UK. He received the Dipl.-Ing. degree with summa cum laude in 1974. He had received a scholarship from the Studienstiftung des deutschen Volkes. Besides his job, in 1977 he founded a model railway shop in Munich that he led successfully until 2009. The shop had 3 to 5 employees and worldwide suppliers and customers in many countries of the EU but also in the USA, Hongkong, Japan and China. Publications, Miscellaneous: - Over 50 scientific publications and conference lectures regarding communications and space technology, Total Quality Management (EFQM, ISO9001), innovation management, HealthIT und Telemedicine/Telemonitoring. - Author, co-author and editor of professional books and brochures regarding aerospace research, HealthIT and Telemonitoring. - Member of the selection committees of the Studienstiftung des deutschen Volkes and the Max-Weber-Programm for the award of scholarships for highly gifted students. - 1986 Development of a research report for the Bavarian State Chancellery for funding of a Bavarian startup enterprise regarding microwave technology. - Nomination for the Deutscher Zukunftspreis of the German President Herzog 1997 with the project HeliRadar. - Since 2002 member of the research committee, the operative steering body of the Muenchner Kreis, responsible for Healthcare and member of the working groups digitization and mobility - Head of the program committees and chairman of the HealthIT congress February 2005 and the conference Telemonitoring in July 2009 in Munich und Member of the program committee for the preparation of the conference Digitizing and Big Data in Healthcare May 2018 in Munich. - From winter term 2012 until 2018 lectures regarding HealthIT infrastructure and Applications as well as business development (e.g. for hospitals) in the extra-occupational master and bachelor courses at the University for Applied Sciences Cologne and 2013 also at the bachelor course Health Economics at Munich University. - 2017-2018 he received a contract for a Research Report from the Technology Agency of Latvia (LIAA) for the „European Regional Development Program“ regarding the development funding of a Latvian startup enterprise. - From 1977 to 2011 he had been member of the board of directors of the Muenchner Baugenossenschaft in Muenchen-Laim with some 1000 flats, 20 years thereof until 2010 as its chairman. Saatja: Günter Braun <[email protected]> Saadetud: 24.08.2020 12:11 Adressaat: <[email protected]> Koopia: SM Info <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]> Teema: Proposal and solution description for an implementation of RFID in hospitals Proposal and Solution Description Dear M. Adamson, dear Mrs. Lill, dear Mrs. Villau, dear Dr. Adamson, dear Dr. Simmo, dear Dr. Troost, dear Dr. Saarts, dear Dr. Kübner, dear Mrs. Lans, dear Mrs. Luuber, dear Mrs. Jobling, dear Mrs. Zmenja, dear Mr. Pohlasalu, dear Mrs. Meos, dear Mrs. Utsar, dear Mrs. Maripuu, dear Mrs. Suder, dear Mrs. Goronovskskaja, dear Mr. Parve, dear Mrs. Räsu, dear Mrs. Podoshvilev, dear Mr. Veeber, dear Mr. or Mrs. Halling, dear Mrs. Karik, dear Mr. or Mrs. Room, dear Mrs. Meren, dear Mr. or. Mrs. Müts, dear Mr. or Mrs. Roos, dear Mr. Voorema, dear Mrs. Kattel, dear Mrs. Alasoo, sear Mrs. Kivirand, dear Mr. Malmet, dear Mr. or Mrs. Rohlin, dear Mrs. Laats, dear Mr. Kontkar, dear Mr. Allikvee, dear Mrs. Halling, dear Mrs. Reinsalu, dear Mrs. Rohi, you are members of the management team, the administration or the board of directors of the East Tallin Central Hospital. At your hospital you provide treatments and services among others in the fields of acute and emergency services, anesthesiology and intensive care, bariatric surgery, breast surgery, cardiac surgery, cardiology, diabetes and endocrinology, ear nose and throat, general and oncologic surgery, endocrine surgery, incontinence and urinary system reconstruction, internal medicine, joint replacements and reconstructions, long term nursing, melanoma surgery, occupational health, ophthalmology, orthopaedics, pain management, sarcoma surgery, spine surgery, surgery (various disciplines), trauma surgery, upper GI surgery, urinary stones, urology, and vascular surgery. As you can see from my attached CV, the Aristo Telemed AG has developed itself or with suitable partners different telemedicine-supported methods for the diagnosis and therapy of chronic diseases and supports startups from several countries regarding international healthcare market access. In 2012 - 2018 I had also lectured eHealth, telemedicine, and business development (mainly for hospitals) at the University for Applied Sciences Cologne and 2015-2016 also at Munich University. Separately, with the University for Applied Sciences Cologne I had developed a prospective multi-centric randomized controlled study for the comparison of the diagnostic effectiveness of different non-invasive methods for the early detection of prostate cancer. It is planned to submit it to the DFG (German Research Community) this year and the results will be published. Already in 2013 I had developed a modern management structure for the German healthcare system based on goals and target agreements. I had also shown and explained it to my students in Cologne and Munich. The management structure is the same that I had introduced with my team at Siemens Enterprise Networks about 20 years ago but with other goals. While the goals for enterprises were and still are profit and company value at the stock exchange, the goals in healthcare should be healthy life years and the health-related quality of life of the population but nobody seemed to be interested in that solution. As changes can only be initiated by politics, I had applied and was elected as a candidate for the European Parliament by the CSU in November 2018. In April 2019 I had corresponded with the deputy director general of the Main Association of Austrian Social Security Institutions, whom I have well known in person since the introduction of the e-card in Austria and a joint visit of the WSIS 2005 in Tunis, regarding the differences in German and Austrian social legislation. On 29.04.2019 at the start of the election campaign to the European parliament with Manfred Weber and Prof. Angelika Niebler in Schrobenhausen I had been interviewed on stage what I would do if elected. I had answered that I would with my team like to harmonize the social laws of the EU member states based on a modern management structure with goals and target agreements to allow all of them access to improvements in healthcare. In contrast to enterprises where the goals are profit and company value at the stock exchange the goals in healthcare will be healthy life years and health-related quality of life of the population. That had been very well received by the listeners (about 1.000 CSU members and supporters). I had then supported Manfred Weber und Angelika Niebler in the election campaign with my proposal described above. Because of the pure list election, however, I had no chance to be elected myself. To the impressive final rally event with several EU heads of state at the exhibition center Munich-Riem I had been invited again. After the event Angelika Niebler told me that we will soon meet again. In October 2019, the office of the EU Commission urged me to apply with my professional CV as an advisor to the EU Commission which I did two weeks later. In November the Canadian trade commissioner in Germany who had sent me addresses and contact data of Canadian startups and established companies before (as I could not visit the Medica 2019) told me that based on the signed free trade agreement CETA between Canada and the EU, Canada might be interested to participate in that harmonization as well. Because of COVID-19 everything had been delayed. A young lady that I know in person who had studied international relations at Groningen University has worked at the EU in Brussels in an internship since 1.03.2020, however she has to work in her home office there. Due to the recently extended restrictions to go out and travel, going to Brussels will probably not be possible for me before the beginning of August 2020. Therefore we will be able to submit several proposals regarding the telemedicine-supported diagnosis and care of the Chronic Kidney Disease at early stages of the disease until then and probably even afterwards. Recently our representative in the United States had suggested to wait a few more months until September 2020 due to the COVID-19 pandemic there. Instead, we will first address all NHS-Trusts and large European and Australian and New Zealand hospitals with proposals for digital technologies in hospitals like this one where the ordering hospitals in Europe may receive loans or grants by the European Union. We will also be able to submit proposals regarding the telemedicine-supported diagnosis and care of the Chronic Kidney Disease at early stages of the disease to those European countries which are not so much affected by COVID-19 like Austria, the Czech Republic, Denmark and Ireland but also others before autumn 2020 as soon as their status of COVID-19 will allow it. With a small Bavarian enterprise that had developed and produces special RFID Tags we had concluded a partnership for marketing and sales of their products. The RFID tags tolerate high temperatures up to 180°C, which are used to sterilize surgical instruments and allow to quickly find surgical instruments and medical devices and also badly oriented patients who can wear such a chip on a bracelet. From different large German hospitals we heard that in one case a complete set of surgical instrument had to be bought again as the existing set had been lost and could not be found any more. In another case an elderly patient was missing and could not be located. Several days later she had been found dead in a storage room. Both cases could have been avoided with the use of RFID technology. You will certainly be able to imagine that the use of those RFID tags in times of COVID-19 will enable personnel and financial relief of hospitals. At your hospitals you carry out different surgical interventions and may also treat badly oriented old patients. Attached please find our proposal and the description of possible RFID room coverages. The attached room coverage principle in connection with the sequential scan principle can be used for a full coverage of rooms and their built-in furniture. Should you not yet have an RFID infrastructure, you can order it from the market leader Nordic ID in Finland (, ). If you should wish a consultation from the provider of the RFID tags, please contact me. I will send you his contact data (email and telephone). If you like to place an order we would be happy about that. Of course, you will get an official invoice when an order had been received and tags have been delivered. In June, the German Government had launched a stimulus package to cope with the Corona pandemic. It includes three billion Euro (grants and loans) for the digitization of hospitals. Similarly, the German chancellor Merkel and the French President Macron suggested a huge funds by the EU in form of loans and financial grants for investment in digital technologies as we have them in this case. A compromise had recently been negotiated successfully by the European Council. It will also have to pass the European parliament to finally come into effect. I had already asked my contacts at the European parliament for information as soon as that will have happened. Best Regards Guenter Braun Dr. Guenter Braun President and CEO Aristo Telemed AG Edmund-Mueller-Str. 2 D-82041 Oberhaching Tel. +49 89 6252818 Fax +49 89 6252719 Mob. +49 171 5573686 Monitoring of rooms and medical equipment and tracking of persons based on RFID technology 1st Use Case: Registration of persons in clinics: Stationary scanners at neuralgic positions are used to record people's wristbands. The location of the reader and the corresponding timestamp are used to create a virtual map of a person's route. Method of coverage for entire rooms RFID RFID antenna Door antenna Room with e.g 41 qm RFID Door antenna RFID antenna 2nd Use Case: Permanent tracking of instruments and medical devices: For example, we use a solution that permanently covers the entire room. However, sequential solutions that work according to an inventory principle are also possible. Method of covering the door range RFID antenna Door Room with e.g. 41 qm Door RFID antenna 3. Use case: Sterilization using trays, as the easiest to implement variant. It is also possible to label individual instruments with RFID tags. In this case, the following should be noted:  The tags must be suitable for metallic materials.  The tags must have temperature resistance.  Here, we use a variant of (round) tags with a radius of 5 mm, which are fixed with a suitable adhesive.  The temperature can be up to 180°C. Due to the very small design, reading distances of a maximum of 3 mm are possible. Reader and RFID tags: Stationary readers including RFID antenna and powerful UHF RFID labels are able to reach the 10 m reading radius. This reading radius is a guide value and is depending on the room geometry. With a fitting arrangement of the antennas, it is possible to cover larger rooms completely with sufficiently high reading quality. We recommend the products of the market leader (nordic ID) for reading and writing hardware. This supplier operates worldwide and makes sure that the hardware has the necessary certification in the respective target country. All RFID tags comply with the international RAIN standard. For the small RFID tags to be stuck on metal, the frequency is 13.56 MHz (send and receive). UHF RFID tags have an international difference:  865-869 MHz apply to European frequencies.  950 MHz are intended for US American and Asian applications.  For UHF RFID tags we can supply both frequency ranges for EU and Non EU. The planned location of use is therefore absolutely necessary for the ordering process, also because each reader is fixed to one of the frequencies. Offer and solution description Our solution is based on 3 elements: RFID Label QR-Code Label Unique codes and Readers digital twins Cloud Item Digialization solution The digital twins are the basis of the SaaS solution with the method for preparing and processing the data. A patent has been registered for this. The required functions can be accessed via apps that are available within the digital twins. The item codes provided are unique worldwide and ensure that the digital twins become individual. Apps that we provide are: • Connecting documents, certificates, ... • Connecting images and graphics • Tracking of time stamps • … To apply the item codes to the physical elements, we use standardized RFID labels for worldwide use. Their function is the secured storage of data, i.e. our item codes. Depending on the area of application, the RFID labels can have different characteristics: from simple paper labels to labels resistant to high temperatures. To link the RFID label to the digital twin, an RFID reader is required. These readers can be installed stationary or can also work as handheld devices. We offer this complete solution from one source. Since it is a well-coordinated product, it can be put into operation worldwide by the users themselves. Below you will find the offer for the requested version of our Cloud Item digitization solution: 1. Item codes and Digital twins For each customer there is a unique onboarding process that includes the deployment of item codes and digital twins. Depending on the solution (entry or basic) there is a maximum number of item codes or twins that can be used. An annual fee for the use of the package is due. This will be paid before the start of use. There is a maximum storage size for managing the data used in the digital twins. This storage volume corresponds to the practical experience made so far. It is sufficient for most application scenarios. If more storage is required for special apps, this volume can be expanded for a fee. We offer free e-mail support for our customers. If telephone support is needed, we offer it as an option with costs. Entry solution Basic solution Onboarding 500,00€ 500,00€ Number of digital twins or usable item codes 100 (max.) 1.000 (max.) Annual fee 250,00€ 750,00€ available storage volume max. 1 GB max. 5 GB Support E-mail (by telephone for a fee) If you have the requirement to combine several digital twins in a higher-level dashboard, we also have a solution for this complex requirement. An app that includes this functional added value. An example for the use of this added value app: A treatment room has several object groups: 1. set of sterile routine instruments 2. the treatment unit 3. wrapped special instruments 4. furniture 4. one-time use articles treatment room Set steriler wrapped special one-time use Alltags- treatment unit furniture instruments articles Instrumente Each individual asset group from point 1-5 can be managed as a single digital twin. If the requirements of the project mean that the different areas need to be combined, we offer an additional app that allows you to bring these different twins together at a single point for management. In the example the different asset groups are merged in the virtual digital twin "treatment room". This app has the following usage prices. 1 Added value twin 2-5 Value-added twins 6-n Value-added twins each each Terms of payment Price to be paid monthly (subscription), can be cancelled monthly. Price 99,00€ 79,00€ 59,00€ Further apps, which are tailored to special requirements, can be programmed and provided (for a fee) by our development team. For example: interfaces to various software systems. The price for this is optional and will be calculated according to the required effort according to a concrete request. 2. RFID Label Different designs can be used for the RFID labels depending on the application scenario. According to your specific request, you will find suitable and immediately applicable RFID labels below: RFID Label Autoclav I RFID Label Autoclav II RFID Label Basic label Type of label Hard Tag Hard Tag Etikett Size of label 51 x 36,3 x 7,5 mm 43,5 x 27,9 x 5.5 mm 100 x 30 mm Attributes RAIN Standard RAIN Standard RAIN Standard Peak temperature: 200°C Peak temperature: Special labels with Certified for medical 150°C highest adhesion strength autoclaves Matt laminated Price per label 6,00 - 8,00€ (quantity dependent) 5,00€ 1,35€ (quantity dependent) Minimum number 100 pieces 100 pieces 1.000 pieces 3. Hardware RFID readers are required to ensure the recording of the item codes. These readers read the code from the RFID label and provide full client functionality: • Reading the RFID codes • Linking to the digital twin • Displaying the data of the corresponding digital twin • Adding new data to the corresponding digital twin • Guarantee of data protection via a separate authorization system If the customer does not have his own RFID readers, we offer these readers optionally. Below are two examples: NORDIC ID HH83 UHF RFID ACD NORDIC ID HH53 UHF RFID ACD Attributes RAIN Standard RAIN Standard UHF RFID UHF RFID 2D Image Barcode 2D Image Barcode WLAN WLAN LTE 3G Bluetooth Bluetooth GNSS GPS Android 9 Android Price 2.400,00€ 2.400,00€ Alternative solution Based on RFID technology, the solution just described has the advantage that many baskets can be processed as a single operation. The assets to be processed should only be handled individually? Then we suggest an alternative solution: 1. Item codes und Digital twins This point does not change from the main proposal. 2. Label No RFID labels are used here, but only non-electronic plastic labels. Example: High temperature hard tag label. Loop Tag Label Hard Tag Label Type of label label Hard Tag Size of label 124 x 27 mm 124 x 27 mm Attributes Special labels with highest adhesive highest adhesive strength or screwable strength Matt laminated 1,50€ (quantity dependent) 1,50€ (quantity dependent) Price per label 1.000 pieces 1.000 pieces 3. Hardware Only a compatible smartphone is used to record and manage the data (QR code readable, Internet available). Therefore no additional costs are incurred here.
Allikas: Sotsiaalministeerium dokumendiregister →
dokumendiregister.eeAsutusedEesti avalike dokumendiregistrite otsing · nimistu.ee andmetel