dokumendiregister.ee
OtsingAsutusedMCP
Otsing›Tarbijakaitse ja Tehnilise Järelevalve Amet
Väljaminev kiriAvalik

Autoriseerimine

Tarbijakaitse ja Tehnilise Järelevalve Amet · 30. september 2013
Viit
13-0184-043
Registreeritud
30. september 2013
Dokumendi liik
Väljaminev kiri
Funktsioon
6.3S Raudteeliiklusregistri ja -ehitisregistri dokumendid (2009-2013) (Suletud)
Sari
6.3-5 Raudteeliikluse register
Toimik
13-0184
Vastutaja
Margus Meius (Raudteetranspordi osakond)

Failid

  • 📎MoM 10.09.13 in Tallinn.docx31 KB

Sisu (failidest)

MEETING MINUTES Tallinn 10.09.2013 nr 6.3-5/ 13-0184-043 Participants : BRE : Mr. Andrei Prokoshev (CNR) , Mr. Yang Xiuwei , Mr. Zou Ronggui Railcar (RC) : Mr. Richard Tomingas EVR Cargo : Mr. Jaanus Kaasik , Mr. Oskar Kalmus Estonian Technical Surveillance Authority (ETSA) : Mr. Meius, Mr. Saare Bureau Veritas Italy (BVI): Mr. Tommaso Ghiara Bureau Veritas China (BVC): Mr. Nathan Cao AGENDA Issue no Issue Responsible body Open/ Closed Due date 1. Conformity assessment procedure BRE/RC OPEN 2. Functional tests BRE/RC OPEN 3. Registration process BRE/RC OPEN Conformity assessment procedure “Type Approval” Participants (RC; BVI; BRE) requested to clarify necessary documentation needed for the CHN Locomotive DF7G-E final authorisation. Also the method how to provide documentation and principles what should be followed. Although the procedure of the conformity assessment has been already explained to all participants by ETSA in several times before (see Minutes of Meeting of 18.08.2011; Minutes of Meeting of 30.09.2011; Minutes of Meeting 06.02.2013; ETSA letter to BRE on 8.11.2012; ETSA letter to BRE on 28.12.2012 nr 6.3-5/12-0438-071; ETSA letter to BRE on 30.11.12 nr 6.3-5/12-0438-058) ETSA explained the common procedure once more: Application for the authorisation for “Type Approval” must be provided by authorized representative in EU (at the moment CNR BRE has declared its representative as the Railcar OÜ). Complete technical file must be included (according to the agreed Matrix). Documents proving the conformity of the vehicle “DF7G-E No 001 diesel locomotive ” ( Nobo conformity Assessment Report, Testing Reports, Technical Dossier, etc.) Documentation can be presented on paper or electronically (scanned documents must be in high quality and coloured, that the information can be clearly identified: signs, stamps… etc.). After the mentioned documentation provided, ETSA ensures that the locomotive type DF7G-E conforms to appropriate requirements and obtains the official decision for placing into market that particular type locomotive DF7G-E. Standard Time for type approval are 4 months, ETSA indicates, for this specific case where many documents were analysed, 1 month after receipt of request and documentation the time of this type approval . One month starts to count from the moment when all the necessary documents provided and all the deficiencies are solved (in case there are any). Functional tests According to the EU Directive 2008/57/EC and Estonian Railway Act railway vehicles (including locomotives) introduced in Estonia for the first time shall be examined and tested prior to their entry into the register in order to attest their compliance with the requirements established for railway vehicles (see Minutes of Meeting of 06.02.2013; ETSA letter on 08.11.2012). In consideration of abovementioned legal aspect and the fact that the locomotive’s functionality is not fully tested yet, the functionality of the locomotive must be tested before the registration process. Functional tests can be carried on according to the approved testing plan. Therefore operator who owns the activity licence and the safety certificate in Estonia must provide testing plan to ETSA and thereafter ETSA approve the plan and tests can be started. Process of the locomotives registration Participants asked the clarifications of the registration process. Although the list of requirements was already given to all participants by ETSA in several times before, (see Minutes of Meeting of 18.08.2011; ETSA letter to CCOEC on 06.12.2012 nr 6.3-5/12-0438-065; Minutes of Meeting of 06.02.2013 nr 6.3-5/13-0184-08), ETSA explained the common procedure once more. Before submitting the application the following presumptions must be accomplished: ETSA decision of placing into service locomotive type DF7G-E (present MoM point 1); Reports of the functional tests (present MoM point 2) . Necessary documents for registering: Cover letter ( Application can be provided by any c ompany who is registered in EU.) Documents verifying the payment of the state fee (copy of the payment order) Documentation related to the possession of the vehicle must be shown. If the application presenter is not the owner of the vehicle, then the power of attorney should be included. (copy of sales contract or copy of lease contract) Spot su pervision report of the vehicle. Documents proving the conformity of the vehicle ( Nobo conformity Assessment Report, Testing Reports, Technical Dossier, etc.)* Documents on the manufacturer, year of production and technical data (technical passport) *T he NoBo must ensure that the specific module (modules are defined in Commission Decision 2010/713/EU) is being used during the production of the further vehicles .
Allikas: Tarbijakaitse ja Tehnilise Järelevalve Amet dokumendiregister →
dokumendiregister.eeAsutusedEesti avalike dokumendiregistrite otsing · nimistu.ee andmetel