European Aviation Safety Agency
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
22 AUGUST 2016
Legal notice: This document presents a ‘prototype’ regulation for to the operation of unmanned aircraft in
the ‘open’ and ‘specific’ categories. Its sole purpose is to inform and consult stakeholders in view of the
ongoing negotiations with the Parliament and the Council on the review of Regulation (EC) No 216/2008 and
in view of giving indications on the possible direction that EASA will take on its implementation, after
appropriate consultation, in a notice of proposed amendment (NPA) planned for the end of 2016.
It represents the current views of EASA; however, it does not constitute any formal commitment on behalf of
EASA nor of the European Commission.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 1 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
DRAFT COMMISSION REGULATION (EU) …/…
of […]
laying down rules as regards unmanned aircraft operations
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union, and in particular Article 114
thereof,
Having regard to Regulation (EU) …/… of the European Parliament and of the Council of … on
common rules in the field of civil aviation and establishing a European Aviation Safety Agency, and
repealing Regulation (EC) No 216/2008 (1), and in particular Articles 45, 46, 47 and 51 thereof,
Having regard to Regulation (EU) No 376/2014 of the European Parliament and of the Council of
3 April 2014 on the reporting, analysis and follow-up of occurrences in civil aviation, amending
Regulation (EU) No 996/2010 of the European Parliament and of the Council and repealing Directive
2003/42/EC of the European Parliament and of the Council and Commission Regulations (EC)
No 1321/2007 and (EC) No 1330/2007 (2),
Whereas:
(1) Pursuant to Regulation (EU) …/… (hereinafter referred to as the ‘Basic Regulation’), the
Commission, assisted by the European Aviation Safety Agency (EASA), is empowered to adopt
the necessary Commission acts for the design, production, maintenance and operation of
unmanned aircraft systems (UASs) and their engines, propellers, parts, non-installed equipment
and equipment to control them remotely.
(2) Measures taken in the framework of this Regulation should be proportionate to the nature and risk
of the type of unmanned aircraft operation and should in particular take due account of the
following: type of operation and whether the operation is open to members of the public; the extent
to which other air traffic or persons and property on the ground could be endangered by the
operation; the type of airspace used and territory overflown; the complexity and performance of
the aircraft involved; the type, scale, and complexity of the operation or activity, including, where
relevant, the size and type of the traffic handled by the responsible organisation or person.
(3) The risk of operating an unmanned aircraft varies as a function of the characteristics of the
unmanned aircraft and the type of operation. Therefore, different rules should apply to different
categories taking into account the principles of proportionality and progressivity, and that rules
should be based on risk assessment and be performance-based.
(4) The higher risk operations of unmanned aircraft should be regulated by similar rules as for manned
aircraft, which include the certification of the aircraft. The introduction of the regulatory
framework to accommodate such ‘certified’ operations should therefore be the subject of a
dedicated rulemaking process amending the existing regulations applicable to manned aircraft.
(5) The lower risk operations, subject to the present Regulation, shall be regulated by less-stringent
requirements based on an operation-centric concept. For these operations, which are subdivided
(1) OJ L …
(2) OJ L 122, 24.4.2014, p. 18.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 2 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
into two categories (the ‘open’ and the ‘specific’ category), proportionate requirements should be
applicable and adapted to the level of risks inherent to the category of operation. In order to reduce
the administrative burden for operators and competent authorities, risk assessments should be
conducted. The associated mitigating action should be identified in the form of ‘standard
scenarios’ covering the types of operations carried out.
(6) Regulation (EC) No 765/2008 (3) provides a framework for the market surveillance of products to
ensure that those products fulfil requirements providing a high level of protection of public
interests, such as health and safety in general, health and safety in the workplace, the protection of
consumers, protection of the environment, and security. This Regulation also provides a
framework for controls on products from third countries and lays down the general principles of
the CE marking.
(7) Decision No 768/2008/EC4 provides, in the form of reference provisions, definitions and general
obligations for economic operators and a range of conformity assessment procedures from which
the legislator can select as appropriate. It also lays down rules for CE marking. Furthermore,
reference provisions are provided as regards the requirements for conformity assessment bodies to
be notified to the Commission as competent to carry out the relevant conformity assessment
procedures and as regards the notification procedures. In addition, this Decision includes reference
provisions concerning procedures for dealing with products presenting a risk in order to ensure the
safety of the market place.
(8) In order to ensure a smooth transition and to avoid disruptions, appropriate transitional measures
should be provided.
(9) The measures provided for in this Regulation take account of Opinion No …/… issued by EASA
in accordance with Article … of the Basic Regulation,
HAS ADOPTED THIS REGULATION:
Article 1
Subject matter and scope
1. This Regulation lays down:
(a) rules for regulating an operation-centric concept for the operation of unmanned aircraft
(UA), and more specifically in the ‘open’ and ‘specific’ categories, within the single
European sky airspace.
(b) technical requirements and administrative procedures for the design, production and
maintenance of UASs in the ‘open’ and ‘specific’ categories within the European Union, as
applicable;
(c) technical requirements and administrative procedures for the implementation of the concepts
of registration, electronic identification, and geofencing;
(3) Regulation (EC) No 765/2008 of the European Parliament and of the Council of 9 July 2008 setting out the
requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation
(EEC) No 339/93 (OJ L 218, 13.8.2008, p. 30).
(4) Decision No 768/2008/EC of the European Parliament and of the Council of 9 July 2008 on a common framework for
the marketing of products, and repealing Council Decision 93/465/EEC (OJ L 218, 13.8.2008, p. 82).
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 3 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
(d) requirements for subcategories in the ‘open’ category;
(e) conditions to issue a declaration or to obtain an authorisation, as appropriate, in the ‘specific’
category;
(f) requirements for the introduction of a concept of standard scenarios in the ‘specific’
category;
(g) conditions to obtain an optional light UA operator certificate (LUC), with associated
privileges; and
(h) conditions for the making available on the market of UASs intended to be used for operations
in the ‘open’ category, as well as requirements for market surveillance relating to the
marketing of those UASs in the Union. Those conditions shall constitute Community
harmonisation legislation within the meaning of Regulation (EC) No 765/2008 and of
Decision No 768/2008/EC.
2. Operations in the ‘certified’ category are not subject to this Regulation.
Article 2
Definitions
1. For the purposes of this Regulation, the definitions of Article 3 of the Basic Regulation, of Article
2 of Regulation (EC) No 765/2008, and of Article R1 of Annex I to Decision No 768/2008/EC
shall apply.
2. For the purposes of this Regulation, the following definitions shall also apply:
(a) ‘acceptable means of compliance’ (AMC) means non-binding standards adopted by EASA
which may be used by persons and organisations to demonstrate compliance with the Basic
Regulation and its Commission acts;
(b) ‘AIS’ means ‘Abbreviated Injury Scale’ and it is an anatomically based coding system
created by the Association for the Advancement of Automotive Medicine to classify and
describe the severity of injuries;
(c) ‘automatic flight’ means a flight following preprogrammed instructions, loaded in the
unmanned aircraft (UA) flight control system, that the UA executes;
(d) ‘certification specifications’ (CSs) means non-binding technical standards adopted by EASA
which indicate the means to demonstrate compliance with the Basic Regulation and its
Commission acts, and which can be used by organisations for the purpose of certification;
(e) ‘competent authority’ means the authority responsible for the certification, authorisation and
oversight of UAS air operations in the Member State where the UAS operator has its
principal place of business or place of residence;
(f) ‘electronic identification’ means the capability to identify a UA in flight without direct
physical access to that aircraft;
(g) ‘first-person-view mode’ means a mode of operation of a UA where the remote pilot
monitors the UA position through a camera installed on the aircraft;
(h) ‘follow-me mode’ means an automatic mode of operation of a UAS where the UA constantly
follows a device;
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 4 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
(i) ‘geographical limitation’ means a restricted airspace volume defined through electronic map
data;
(j) ‘geofencing’ means an automatic function to limit the access of the UA to airspace areas or
volumes provided as geographical limitations based on the UA position and navigation data;
(k) ‘guidance material (GM)’ means non-binding material developed by EASA that helps to
illustrate the meaning of a requirement or specification and is used to support the
interpretation of the Basic Regulation, its Commission acts, certification specifications and
acceptable means of compliance;
(l) ‘hazard’ means a condition or an object with the potential to cause injuries, damage, loss of
material or a reduction of the ability to perform a prescribed function;
(m) ‘operator of a UA’ means any natural or legal person who operates or intends to operate a
UA;
(n) ‘Part-UAS’ means the rules applicable to the operation of a UA falling into the ‘open’ or
‘specific’ category, as laid down in Annex I to this Regulation;
(o) ‘placing on the market’ shall mean the first time a product is made available on the EU
market;
(p) ‘remote pilot’ is a natural person who manipulates the flight controls of a UA, as appropriate,
during a flight and is responsible for safely conducting the flight;
(q) ‘remote pilot competency’ means a combination of skills, knowledge and attitudes required
to perform a task to the prescribed standard;
(r) ‘remote pilot station’ (RPS) means a component of the UAS containing the equipment used
to control the UA;
(s) ‘standard scenario’ means a description of a type of operation included in a certification
specification issued by EASA, for which a specific operations risk assessment (SORA) has
been conducted;
(t) ‘UA’ (unmanned aircraft) means any aircraft operated or designed to be operated without a
pilot on board;
(u) ‘UA observer’ means a natural person who, by visual observation of the UA, assists the
remote pilot in safely conducting the flight;
(v) ‘UA system’ (UAS) means the UA and any equipment, apparatus, appurtenance, software
or accessory that is necessary for the safe operation of the UA;
(w) ‘visual line of sight’ (VLOS) means a type of operation in which the remote pilot maintains
continuous unobstructed and unaided visual contact with the UA, allowing the remote pilot
to monitor the flight path of the UA in relation to other aircraft, persons, and obstacles, for
the purpose of maintaining separation from them and avoiding collisions.
3. The definitions relative to product legislation are listed in Annex II.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 5 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Article 3
Categories of UA operations
UA operations shall fall into one of the following three risk-based categories:
1. ‘open’ is a category of UA operation that, considering the risks involved, does not require a prior
authorisation by the competent authority before the operation takes place;
2. ‘specific’ is a category of UA operation that, considering the risks involved, requires an
authorisation by the competent authority before the operation takes place and takes into account
the mitigation measures identified in an operational risk assessment, except for certain standard
scenarios where a declaration by the operator is sufficient;
3. ‘certified’ is a category of UA operation that, considering the risks involved, requires the
certification of the UA, a licensed remote pilot and an operator approved by the competent
authority, in order to ensure an appropriate level of safety.
Article 4
Principles for UA operations
1. The operator of a UA shall be responsible for its safe operation. The operator shall comply with
the requirements laid down in this Regulation and other applicable regulations, in particular those
related to security, privacy, data protection, liability, insurance and environmental protection.
2. The operator of a UA shall register with the competent authority and display registration marks on
all the UA it operates in order for them to be easily identifiable, when required by UAS.OPEN.30
and UAS.SPEC.40.
3. The operator shall ensure that UA are equipped with an electronic identification means, when
required by UAS.OPEN.70 and UAS.OPEN.80.
4. The operator shall ensure that UA are equipped with a geofencing function, when required by
UAS.OPEN.70 and UAS.OPEN.80.
5. The competent authorities may designate zones or airspace areas where UA operations are
prohibited or restricted, in accordance with Article 12.
Article 5
‘Open’ category operations
1. For operations in the ‘open’ category, risks shall be mitigated through a combination of safety
measures, including:
(a) requirements and limitations on the operation, the UAS, and the personnel and organisations
involved as detailed in Annex I to this Regulation; and
(b) limitations to be defined by the competent authority for geofencing purposes or for particular
airspace areas.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 6 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
2. Considering the different levels of risk within an ‘open’ category operation, this category is further
divided into subcategories of operations. Each subcategory of operation is characterised by:
(a) the use of a specific class of UAS defined by the technical requirements provided in the
related appendix;
(b) operational limitations; and
(c) requirements for the remote pilot and operator, as appropriate.
3. Except for privately built UASs in subcategory A0, the requirements defining the different classes
of UASs operated or intended to be operated in the ‘open’ category shall constitute Community
harmonisation legislation within the meaning of Regulation (EC) No 765/2008 and of Decision No
768/2008/EC. The placing on the market of UASs of those classes shall comply with the conditions
and rules set out in Annex II to this Regulation.
4. An operation of a UA conducted in the ‘open’ category within the single European sky airspace
shall comply with the requirements of Subpart A of Annex I to this Regulation.
Article 6
‘Specific’ category operations
1. For operations in the ‘specific’ category, risks shall be mitigated through safety measures
identified in an operational risk assessment or contained in a standard scenario published by
EASA.
2. In order to be able to operate in the ‘specific’ category, the operator shall comply with the
conditions specified in:
(a) the standard scenario, where a declaration is considered sufficient;
(b) an operational authorisation issued by the competent authority; or
(c) an operational authorisation issued by the holder of a light UA operator certificate (LUC)
with privileges to authorise its operations.
3. An operation of a UA conducted in the ‘specific’ category within the single European sky airspace
shall comply with the requirements of Subpart B of Annex I to this Regulation.
Article 7
Safety-critical services
1. The provider of any safety-critical services is responsible for the accuracy and integrity of the
provided information and data, and for the quality of the services.
2. The provider shall have a suitable organisational structure, appropriate documented procedures,
and adequate resources and personnel.
3. Services may include but are not limited to:
(a) providing geographical data and limitations;
(b) collecting and forwarding occurrence data;
(c) the training of pilots.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 7 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Article 8
Designation of the competent authority
1. As laid down in the Basic Regulation, a Member State shall designate one or more competent
authorities, with allocated responsibilities for the authorisation and oversight of UA operations.
2. If a Member State designates more than one entity as a competent authority:
(a) the areas of competence of each entity shall be clearly defined; and
(b) coordination shall be established between those entities to ensure effective implementation
of this Regulation.
3. The Member State shall designate competent authorities that:
(a) have a suitable organisational structure, appropriate documented procedures, and adequate
resources;
(b) have personnel with sufficient knowledge, experience and training to perform their allocated
tasks.
4. Member States shall ensure that the competent authority personnel do not perform activities related
to this Regulation when there is evidence that this could result, directly or indirectly, in a conflict
of interest, in particular when related to family or financial interest.
5. Member States shall ensure that the competent authority safeguards the objectivity and impartiality
of its activities.
Article 9
Responsibilities of the competent authority
1. The competent authority shall:
(a) examine documents, records and reports relevant to UA operations, remote pilots or
operators;
(b) develop an oversight programme on an annual basis, including audits and inspections, as
appropriate and proportionate to the identified risks;
(c) take into account the results of past oversight activities and the safety priorities when
defining the scope of the oversight programme;
(d) inspect as required UASs, remote pilots and operators to determine their compliance with
this Regulation;
(e) issue, suspend, revoke or amend certificates and authorisations to carry out the types of
operations referred to in this Regulation;
(f) establish and maintain a register of UA operators, and a register(s) of declarations,
authorisations and certificates;
(g) have a system to detect and analyse non-compliances by declared organisations, or by
organisations it has authorised or certified, and shall limit, suspend or revoke an
authorisation or certificate or impose other measures or sanctions as applicable;
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 8 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
(h) approve, restrict or prohibit airspace areas or define special zones, and make this information
available;
(i) establish enforcement measures and sanctions;
2. The responsibilities and tasks of the competent authority shall be carried out in accordance with
the legal provisions of the relevant Member State.
Article 10
Exchange of safety information
Competent authorities designated under Article 8 and the notifying authorities defined in Annex II
Article II.18 shall set up a network to organise and implement cooperation on safety matters, including
the establishment of a system to exchange safety information and to ensure the interoperability of the
registers referred to in Article 9(1)(f) through a standardised interface(s).
Article 11
Means of compliance
1. EASA shall develop acceptable means of compliance (AMC) and certification specifications (CSs)
that may be used to establish compliance with the Basic Regulation and its Commission acts. When
AMC are complied with, the related requirements of the Commission acts are met.
2. Alternative means of compliance may be used to establish compliance with the Basic Regulation
and its Commission acts.
3. The competent authority shall establish a system to consistently evaluate that all alternative means
of compliance used by itself or by organisations and persons under its oversight allow the
establishment of compliance with the Basic Regulation and its Commission acts.
4. The competent authority shall evaluate all alternative means of compliance proposed by an
organisation by analysing the documentation provided and, if considered necessary, conducting
an inspection of the organisation.
When the competent authority finds that the alternative means of compliance are in accordance
with the Basic Regulation and its Commission acts, it shall, without undue delay:
(a) notify the applicant that the alternative means of compliance may be implemented and, if
applicable, amend the operational authorisation or certificate of the applicant accordingly;
(b) notify EASA of their content, including copies of all relevant documentation;
(c) inform other Member States about alternative means of compliance that were accepted.
5. When the competent authority itself uses alternative means of compliance to achieve compliance
with the Basic Regulation and its Commission acts, it shall:
(a) make them available to all organisations and persons under its oversight; and
(b) without undue delay, notify EASA.
6. The competent authority shall provide EASA with a full description of the alternative means
of compliance, including any revisions to procedures that may be relevant, as well as an
assessment demonstrating that the Commission acts are met.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 9 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Article 12
Airspace areas or special zones for UA operations
1. Based on the categories of operation and required mitigation measures, the competent authorities
shall define airspace areas or special zones:
(a) where UA operations are not permitted without prior authorisation or are not permitted at
all;
(b) where UA shall comply with defined technical or performance specifications, including
mandatory equipment or functions that enable easy identification or automatically limit the
airspace they can enter (geofencing);
(c) where UA operations shall comply with specified environmental standards.
2. The information on prohibited, restricted and special zones for UA operations, as well as on
required authorisations, shall be made available in a manner and format acceptable to EASA.
Article 13
Immediate reaction to a safety problem
1. EASA and the competent authorities shall collect, analyse and disseminate safety information
concerning UA operations in their territory in accordance with the Basic Regulation and its
Commission acts.
2. Upon receiving the information referred to in 1. above, EASA or the competent authority shall
take adequate measures to address safety problems.
3. Measures taken under 2. above shall immediately be notified to all persons or organisations which
need to comply with such measures under the Basic Regulation and its Commission acts.
Competent authorities shall also notify those measures to EASA, if it has not been addressed, and,
when combined action is required, to the other Member States concerned.
Article 14
Applicability
1. As from [2 years after entry into force of this Regulation — estimate 2019], economic operators
and UASs placed on the market shall comply with this Regulation.
2. UASs placed on the market before [2 years after entry into force of this Regulation — 2019] and
having a mass of 250 g or less, including payload, are deemed to be classified as class 0 as defined
in Appendix I.2 and can continue to be operated according to operational subcategory A0 defined
in UAS.OPEN.60.
3. As from [3 years after entry into force of this Regulation — estimate 2020], all UA shall be
operated in accordance with this Regulation.
4. By [3 years after entry into force of this Regulation — estimate 2020], all operators shall convert
their existing authorisations into authorisations or declarations as required by this Regulation.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 10 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Article 15
Transitional provisions
For recreational operations of UA, such as leisure flights, air displays, sport or competition activities,
conducted in the frame of associations or clubs with proven satisfactory safety records and performed
under national systems before this Regulation enters into force, the following transitional provisions
shall apply:
1. By [3 years after entry into force of this Regulation — estimate 2020], the competent authority
shall issue operational authorisations to associations or clubs for the operations which would
otherwise require an authorisation according to Subpart B of Annex I to this Regulation.
2. An operational authorisation can be issued without the need to conduct the operational risk
assessment referred to in UAS.SPEC.60.
3. Operational authorisations issued under this Article shall define the conditions, limitations and
deviations from the requirements of Subpart B of Annex I to this Regulation.
Article 16
Entry into force and application
This Regulation shall enter into force on the twentieth day following that of its publication in the Official
Journal of the European Union.
It shall apply from […].
This Regulation shall be binding in its entirety in all Member States.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 11 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
ANNEX I
Operation of UA in the ‘open’ and ‘specific’ categories
[PART-UAS]
Table of contents
Subpart A — OPEN CATEGORY
UAS.OPEN.10 Operational subcategories
UAS.OPEN.20 Responsibilities of the operator
UAS.OPEN.30 Registration of UA operators
UAS.OPEN.40 Requirements applicable to all UA operations in the ‘open’ category
UAS.OPEN.50 Requirements applicable to UA operations in subcategory A0
UAS.OPEN.60 Requirements applicable to UA operations in subcategory A1
UAS.OPEN.70 Requirements applicable to UA operations in subcategory A2
UAS.OPEN.80 Requirements applicable to UA operations in subcategory A3
UAS.OPEN.90 Occurrence reporting
Subpart B — SPECIFIC CATEGORY
UAS.SPEC.10 Responsibilities of the operator
UAS.SPEC.20 Registration of UA operators
UAS.SPEC.30 Requirements applicable to all UA operations in the ‘specific’ category
UAS.SPEC.40 Operational declaration
UAS.SPEC.50 Application for an operational authorisation
UAS.SPEC.60 Operational risk assessment
UAS.SPEC.70 Operations manual
UAS.SPEC.80 Issuing an operational authorisation
UAS.SPEC.90 UAS logbook
UAS.SPEC.100 Use of certified equipment and UA
UAS.SPEC.110 Occurrence reporting
Subpart C — LIGHT UA OPERATOR CERTIFICATE (LUC)
UAS.LUC.10 Application for a light UA operator certificate (LUC)
UAS.LUC.20 Management system
UAS.LUC.30 Record-keeping
UAS.LUC.40 Issuing a light UA operator certificate
Appendix I.1 UA operator registration form
Appendix I.2 Product requirements for class A0 UASs
Appendix I.3 Product requirements for class A1 UASs
Appendix I.4 Product requirements for class A2 UASs
Appendix I.5 Product requirements for class A3 UASs
Appendix I.6 Product requirements for UAS components
Appendix I.7 Operational declaration form
Appendix I.8 Operational authorisation form
Appendix I.9 Operational authorisation: Application form
Appendix I.10 LUC application form
Appendix I.11 LUC form
Appendix I.12 Awareness leaflet
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 12 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
SUBPART A
OPEN CATEGORY
UAS.OPEN.10 Subcategories of operations
Operation of UA in the ‘open’ category shall fall into one of the following subcategories:
(a) subcategory A0: operation of UA posing a negligible risk of severe injury to people on the
ground or damage to manned aircraft, and requiring neither specific remote pilot competence
nor age limitations;
(b) subcategory A1: operation of UA complying with requirements ensuring that they pose a
negligible risk of severe injury to people on the ground or damage to manned aircraft, and
requiring neither specific remote pilot competence nor strict operational limitations;
(c) subcategory A2: operation of UA complying with requirements ensuring that they pose a
limited risk of severe injury to people on the ground or damage to manned aircraft, operated
by registered operators, and equipped with geofencing and electronic identification;
(d) subcategory A3: operation of UA complying with requirements imposing technical
mitigations like geofencing and electronic identification, posing a higher risk of severe
injuries to people on the ground or damage to manned aircraft and operated by registered
operators with higher competence.
UAS.OPEN.20 Responsibilities of the operator
(a) The operator of a UA shall have the ultimate responsibility for the operation of that UA.
(b) When applicable, the operator of a UA shall designate a remote pilot for each operation.
(c) The operator shall:
(1) comply with the regulations applicable in all Member States affected by the operation,
in particular those related to safety, privacy, data protection, liability, insurance,
security and environmental protection;
(2) ensure that prior to conducting operations, remote pilots and all other personnel are
competent for the performance of their tasks and are familiar with the operator’s policy
and procedures; and
(3) prepare and maintain a list of personnel with assigned duties, if applicable.
UAS.OPEN.30 Registration of UA operators
Except when operating in subcategory A0 or when already registered in the ‘specific’ category,
the operator of a UA shall:
(a) register in the Member State where they have their permanent residence, or a principal place
of business, using the form in Appendix I.1;
(b) in the case of a legal person, include in the registration form in Appendix I.1 a description
of the structure of the organisation, including a statement that the UA will be operated only
by remote pilots with a level of competency appropriate for conducting operations with a
UA and appropriate to the category of the UAS; and
(c) display the registration number on the UA.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 13 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
UAS.OPEN.40 Requirements applicable to all UA operations in the ‘open’ category
(a) The remote pilot shall:
(1) be in a physical and mental condition that would not put at risk the safe operation of
the UA, other aircraft, people, or property and shall not operate when adversely
affected by drugs or alcohol; and
(2) where the remote pilot is also the operator, comply with UAS.OPEN.20 and
UAS.OPEN.30.
(b) Before the initiation of any UA operation, the remote pilot shall:
(1) obtain updated information about any flight restrictions or conditions published by the
competent authority that may be relevant to the intended operation;
(2) familiarise themselves with the operating environment, including the locations of
people, properties and any other hazards; and
(3) check that:
(i) the UAS is in a safe condition to accomplish the intended flight, and where
applicable, has been updated with geofencing data and recovery procedures; and
(ii) the UAS complies with the user manual (or equivalent) provided by the
manufacturer.
(c) During flight, the remote pilot shall:
(1) comply with the requirements applicable to the UA operational subcategory;
(2) avoid reckless manoeuvres with the UA;
(3) comply with the limitations defined by the competent authority for the area, zone or
airspace;
(4) ensure the safe operation of the UA, including a safe separation of the UA from people,
property, ground vehicles, public roads and from other airspace users;
(5) discontinue a flight when continuing the flight would pose a hazard to other aircraft,
people, or properties;
(6) operate the UA within the performance limitations defined in the user manual (or
equivalent) provided by the manufacturer;
(7) not use the UA to transport dangerous goods or passengers;
(8) not fly close to areas where an emergency response effort is ongoing; and
(9) respect other people’s fundamental rights and operate the UA in a considerate way to
minimise nuisance to other people from noise emissions.
UAS.OPEN.50 Requirements applicable to UA operations in subcategory A0
UA operations in subcategory A0 shall:
(a) be performed:
(1) either with a class 0 UAS placed on the market:
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 14 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
(i) complying with Directive 2009/48/EC (5) on the safety of toys and the product’s
requirements defined in Appendix I.2;
(ii) displaying the CE (Conformité Européene) marking and the class 0 identification
label on the UA in a visible and practical manner; and
(iii) not be modified in a way that breaches compliance with the requirements in
Appendix I.2; or
(2) with a privately built UAS complying with the following:
(i) the UA has a maximum take-off mass, including payload, of less than 250 g and
its maximum ground speed is less than 15 m/s; or
(ii) in the case of a tethered aircraft, the maximum length of the tether is 50 m, it has
no propulsion system, and:
a. its maximum take-off mass, including payload, is less than 25 kg; or
b. in the case of lighter-than-air aircraft, the volume is less than 40 m³;
(b) be conducted:
(1) up to a height of 50 m (150 ft) above ground level;
(2) within a range such that the remote pilot maintains visual line of sight (VLOS) and the
UA does not exceed a horizontal distance of 100 m from the remote pilot; or
(3) in first-person-view mode or follow-me mode, only if the remote pilot maintains a safe
separation of the UA from people, property, ground vehicles, public roads and from
other airspace users.
UAS.OPEN.60 Requirements applicable to UA operations in subcategory A1
UA operations in subcategory A1 shall:
(a) be performed with a class 1 UAS placed on the market:
(1) complying with the product requirements defined in Appendix I.3;
(2) displaying the CE marking and the class 1 identification label on the UA in a visible
and practical manner;
(3) displaying the registration number of the operator in a visible and practical manner;
and
(4) that has not been modified in a way that breaches compliance with the product
requirements in Appendix I.3;
(b) be conducted:
(1) up to a height of 50 m (150 ft) above ground level unless otherwise limited by the
competent authority for the operation area; and
(2) within a range such that the remote pilot maintains VLOS; or
(3) in first-person-view mode or follow-me mode, only if the remote pilot maintains a safe
separation of the UA from people, property, ground vehicles, public roads and from
other airspace users;
(5) OJ L 170, 30.6.2009, p. 1.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 15 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
(c) be carried out by a remote pilot being at least 14 years old.
UAS.OPEN.70 Requirements applicable to UA operations in subcategory A2
UA operations in subcategory A2 shall:
(a) be performed with a class 2 UAS placed on the market:
(1) complying with the product requirements defined in Appendix I.4;
(2) displaying the CE marking and the class 2 identification label on the UA in a visible
and practical manner;
(3) displaying the registration mark of the operator in a visible and practical manner; and
(4) that has not been modified in a way that breaches compliance with the requirements in
Appendix I.4;
(b) be conducted:
(1) up to a height of 50 m (150 ft) above ground level;
(2) within a range such that the remote pilot maintains VLOS;
(3) with a minimum horizontal distance of 50 m from uninvolved persons; and
(4) with active and up-to-date geofencing and electronic identification systems;
(c) be carried out by a remote pilot:
(1) being at least 14 years old; and
(2) having the appropriate familiarisation according to the user manual.
UAS.OPEN.80 Requirements applicable to UA operations in subcategory A3
UA operations in subcategory A3 shall:
(a) be performed with a class 3 UAS placed on the market:
(1) complying with the product requirements defined in Appendix I.5;
(2) displaying the CE marking and the class 3 identification label on the UA in a visible
and practical manner; and
(3) that has not been modified in a way that breaches compliance with the requirements in
Appendix I.5;
(b) be conducted:
(1) up to a height of 150 m (500 ft) above ground level, unless otherwise determined by
the competent authority for the operational area based on airspace considerations;
(2) within a range such that the remote pilot, or a UA observer who is situated within the
VLOS of the remote pilot, maintains VLOS; clear and effective communication shall
be established between the remote pilot and the UA observer;
(3) with a minimum horizontal distance of 20 m from uninvolved persons if flying a
rotorcraft, or 50 m otherwise; and
(4) with active and up-to-date geofencing and electronic identification systems;
(c) and be carried out by a remote pilot:
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 16 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
(1) being at least 14 years old;
(2) carrying evidence of the competence achieved after having received training provided
by training service providers in general knowledge of aviation and airspace, principles
of operation of UA, risk management, ethical airmanship, data protection, privacy
protection and environmental protection according to standards or alternative
qualifications accepted by EASA;
(3) having the appropriate familiarisation or practical training to minimise the risk to third
parties in the specific conditions and operational environment, following best
practices.
UAS.OPEN.90 Occurrence reporting
In the event of a fatal or serious injury to a person or when an aircraft other than a UA is involved,
the operator shall report the occurrence and other safety-related information regarding the UAS,
in compliance with Regulation (EU) No 376/2014.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 17 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
SUBPART B
SPECIFIC CATEGORY
UAS.SPEC.10 Responsibilities of the operator
(a) The operator of UA shall have the ultimate responsibility for their operation.
(b) When applicable, the operator of UA shall designate a remote pilot for each operation.
(c) The operator shall:
(1) comply with the regulations applicable in all Member States affected by the operation,
in particular those related to safety, privacy, data protection, liability, insurance,
security and environmental protection;
(2) ensure that prior to conducting operations, remote pilots and all other personnel are
competent for the performance of their task and are familiar with the operator’s
policies and procedures;
(3) comply with the ‘standard scenario’ requirements when applicable;
(4) unless the local conditions of the place where the operation takes place impose
additional limitations, carry out an operation within the limitations and conditions
specified in the operational authorisation or operational declaration, as applicable; and
(5) prepare and maintain a list of personnel with assigned duties if applicable.
UAS.SPEC.20 Registration of UA operators
Except when already registered in the ‘open’ category, the operator of a UA shall:
(a) register in the Member State where the operator has its permanent residence, or a principal
place of business, using the form in Appendix I.1;
(b) in the case of a legal person, include in the registration form in Appendix I.1 a description
of the structure of the organisation, including a statement that the UA will be operated only
by remote pilots with a level of competency appropriate for conducting operations with that
UA and appropriate to the category of UA operation; and
(c) display the registration identification on the UA.
UAS.SPEC.30 Requirements applicable to all UA operations in the ‘specific’ category
The remote pilot shall:
(a) be in a physical and mental condition that would not put at risk the safe operation of the UA,
other aircraft, people, or property and not operate when adversely affected by drugs or
alcohol; and
(b) where the remote pilot is also the operator, comply with UAS.SPEC.10 and UAS.SPEC.20.
Before the initiation of a UA operation, the remote pilot shall:
(a) obtain updated information about any flight restrictions or conditions published by the
competent authority that may be relevant to the intended operation;
(b) familiarise themselves with the operating environment, including the locations of people,
properties and any other hazards;
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 18 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
(c) check that the UAS is in a safe condition to accomplish the intended flight, and where
applicable, has been updated with geofencing data and recovery procedures;
(d) be familiar with the operations manual for the specific type of the operation; and
(e) ensure that the operating conditions, including environmental conditions, are compatible
with the authorised conditions and limitations.
During flight, the remote pilot shall:
(a) avoid reckless manoeuvres with the UA;
(b) comply with the limitations defined by the competent authority for the area or airspace;
(c) ensure the safe operation of the UA, including a safe separation of the UA from people,
property, ground vehicles, public roads and from other airspace users;
(d) discontinue a flight when continuing the flight would pose a hazard to other aircraft, people
or properties;
(e) operate the UA within the performance limitations defined in the user manual (or equivalent)
provided by the manufacturer;
(f) respect the limitations defined by the competent authority for the restricted or prohibited
areas or airspace, where the operation takes place;
(g) not use the UA to transport passengers;
(h) not fly close to areas where an emergency response effort is ongoing; and
(i) respect other people’s fundamental rights and operate the UA in a considerate way to
minimise nuisance to other people from noise emissions.
UAS.SPEC.40 Operational declaration
(a) Except when holding an LUC per Subpart C of this Annex, with the appropriate privileges,
and where the relevant ‘standard scenario’ published by EASA so requires, the operator shall
submit an operational declaration to the competent authority in accordance with the form in
Appendix I.7.
(b) The operational declaration shall include all information relevant for the intended operations,
a statement of compliance with the limitations and conditions applicable to the relevant
‘standard scenario’, and a signed acknowledgement of responsibility under this Regulation.
(c) Upon receipt of the declaration submitted by a UA operator, the competent authority shall
verify that the declaration contains all the information and documents referred to in (b).
(d) Upon submission of the operational declaration, the operator shall be entitled to start the
operation as long as it corresponds to a ‘standard scenario’ published by EASA.
(e) The operator shall notify the competent authority, without delay, of any changes to the
statements and information submitted in the operational declaration.
UAS.SPEC.50 Application for an operational authorisation
(a) Except when holding an LUC per Subpart C of this Annex, with the appropriate privileges,
the operator shall submit an application for operational authorisation to the competent
authority in accordance with the form in Appendix I.9 prior to starting an operation that:
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 19 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
(1) corresponds to a ‘standard scenario’ published by EASA and requesting an operational
authorisation; or
(2) does not correspond to a ‘standard scenario’.
(b) The application shall include all the information relevant to the operation and a statement of
compliance with the limitations and conditions applicable to the relevant ‘standard scenario’,
if applicable, and a signed acknowledgement of responsibility under this Regulation.
(c) The operator shall only start the proposed operation after having received the operational
authorisation issued by the competent authority in accordance with the form in
Appendix I.8.
(d) Any change to the operation not covered by the authorisation or by a ‘standard scenario’
published by EASA shall require the submission of a new application for an operational
authorisation under this Regulation.
UAS.SPEC.60 Operational risk assessment
(a) EASA shall approve and publish ‘standard scenarios’ and their associated ranges of
mitigating measures for the types of operations for which a risk assessment has been
conducted and for which mitigating measures have been identified.
(b) If the operation does not correspond to any of the ‘standard scenarios’ published by EASA,
the operator shall conduct a risk assessment of the proposed operation and identify mitigation
measures to be put in place in order to limit the risk to an acceptable level. The operator shall
consider the following key factors:
(1) the operational area and conditions;
(2) the category of airspace and the effects on other air traffic and air traffic management
(ATM);
(3) the design features and performance of the UAS;
(4) the type of operation;
(5) the level of competence of the remote pilot;
(6) organisational factors; and
(7) effects on the environment.
(c) Except when holding an LUC per Subpart C of this Annex, the operator shall provide the
competent authority with the risk assessment.
UAS.SPEC.70 Operations manual
If the operation does not correspond to any of the ‘standard scenarios’ published by EASA or if
required by the relevant ‘standard scenario’, the operator shall compile an operations manual
adapted to the type of operation.
UAS.SPEC.80 Issuing of an operational authorisation
(a) Upon receipt of an application for the issuing of an operational authorisation from a UA
operator, the competent authority shall verify that the application contains all the information
and documentation required.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 20 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
(b) The competent authority shall issue an authorisation using the form in Appendix I.8 to an
operator to conduct an operation under a ‘specific’ category when:
(1) it concludes that the operation corresponds to a ‘standard scenario’ published by EASA
for which an authorisation is required, and:
(i) it is satisfied that the means of mitigation required by the ‘standard scenario’
have been adequately put in place by the operator; and
(ii) it has found the operations manual referred to in UAS.SPEC.70 to be acceptable;
(2) the type of operation does not correspond to a ‘standard scenario’ and:
(i) it is satisfied with the risk assessment provided by the operator;
(ii) it is satisfied that the means of mitigation necessary to limit the risk to an
acceptable level have been adequately established by the operator; and
(iii) it has found the operations manual required by UAS.SPEC.70 to be acceptable.
(c) The authorisation may be issued for a limited or an unlimited duration. The conditions under
which an operator is authorised to conduct the intended operation shall be specified in the
authorisation.
(d) If there are changes to the operational conditions for which an operator has received an
operational authorisation, the competent authority may decide whether the authorisation
shall be suspended, revoked or amended.
UAS. SPEC.90 UAS logbook
Where required in the operational authorisation, the operator shall ensure that, as a minimum,
records of completion of preflight or postflight checks, time in service, and of defects and repairs
with regard to the UAS are retained in the form of a logbook, or equivalent.
UAS.SPEC.100 Use of certified equipment and certified UA
(a) If the operation relies on certified UA or certified equipment, the operator shall record the
operation or service time according to the instructions and procedures applicable to the
certified equipment or the organisational approval or authorisation.
(b) The operator shall follow the instructions for continued airworthiness for the equipment or
the UA and comply with mandatory directives published by EASA.
UAS.SPEC.120 Occurrence reporting
The operator shall report to the competent authority any operation of the UA that involves an injury
to any person or damage to any property, vehicle, or another aircraft in accordance with Regulation
(EU) No 376/2014.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 21 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
SUBPART C
LIGHT UA OPERATOR CERTIFICATE (LUC)
UAS.LUC.10 Application for a light UA operator certificate (LUC)
(a) The operator may apply for an LUC to the competent authority.
(b) The operator shall submit an application using the form in Appendix I.10 including:
(1) the relevant information for the application;
(2) a description of their management system, including their organisational structure and
safety management system;
(3) the name(s) of the responsible personnel, including the person responsible for
authorising operations with UA; and
(4) a statement that all the documentation submitted to the competent authority has been
verified by the applicant and found to comply with the applicable requirements.
(c) The operator shall only start an operation after having received an LUC issued by the
competent authority in accordance with this Regulation.
UAS.LUC.20 Management system
(a) The LUC holder shall establish, implement and maintain a management system that
includes:
(1) a safety policy and clearly defined lines of responsibility and accountability throughout
the organisation, including the direct accountability for safety of the responsible
personnel;
(2) the identification of the aviation safety hazards entailed by the activities of the
operator, their evaluation and the management of the associated risks, including taking
action to mitigate the risk and verify the effectiveness of the action;
(3) documentation of all management system key processes, including a process for
making personnel aware of their responsibilities and the procedure for amending this
documentation; and
(4) a function to monitor the compliance of the operator with the established mitigations
and requirements.
(b) The LUC holder shall appoint a safety manager.
(c) For organisations having a workforce of more than 20 full-time equivalents (FTEs) involved
in the UA operations and maintenance, a safety board shall be established.
UAS.LUC.30 Record-keeping
(a) The operator shall establish a record-keeping system that allows adequate storage and
reliable traceability of all activities developed, covering in particular all the elements
indicated in UAS.LUC.20.
(b) The format of the records shall be specified in the operator’s procedures.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 22 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
(c) Records shall be stored in a manner that ensures protection from unauthorised access,
damage, alteration and theft.
UAS.LUC.40 Issuing a light UA operator certificate (LUC)
(a) The competent authority shall issue an LUC in accordance with the form in Appendix I.11
after it is satisfied that the operator complies with UAS.LUC.10, UAS.LUC.20 and
UAS.LUC.30.
(b) The LUC shall include the operator’s privileges and operational limitations where
applicable.
(c) An operator holding an LUC shall have the privilege to authorise its own operations within
its scope of approval.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 23 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
APPENDICES
Required forms for authorisations, certificates and products
EASA FORMS
When the forms of this Annex are issued in a language other than English, an English translation
shall be included.
The EASA (‘European Aviation Safety Agency’) forms referred to in the appendices to this Part
shall have the following mandatory features. Member States shall ensure that the EASA forms
they issue are recognisable and shall be responsible for having those forms printed.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 24 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Appendix I.1
UA operator registration form
TBD
[The form shall contain at least the following:
a) Name of the operator (or the business name, if a company), postal address, and mailing
address;
b) If it is an organisation, it needs to state the following:
All UA operations shall comply with this Regulation, remote pilots shall be sufficiently
trained and informed of the UAS limitations and permitted fly zones, areas or airspaces.]
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 25 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Appendix I.2
Product requirements for class 0 UASs
This Appendix constitutes Community harmonisation legislation within the meaning of
Regulation (EC) No 765/2008 and of Decision No 768/2008/EC for class 0 UASs, while the
conformity assessment procedure is defined in Annex II Article II.12.
A class 0 UAS shall comply with Directive 2009/48/EC on the safety of toys and shall:
(a) have a maximum take-off mass, including payload, of 250 g;
(b) have performance limitations or an active system limiting the attainable height of the UA to
a maximum of 50 m above the ground level, limiting the distance of the UA to 100 m from
the remote pilot, and the maximum ground speed of the UA shall be less than 54 km/h (15
m/s);
(c) be safely controllable without any training courses;
(d) bear the following label on the UA in a visible manner:
(e) be placed on the market with clear operational instructions and warnings highlighting the
risks related to UAS operations, adapted to the age of the user;
(f) include information required to use the UAS in accordance with the applicable regulations
on aviation safety, security, privacy and data protection, liability and insurance and the
awareness leaflet defined in Appendix I.12.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 26 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Appendix I.3
Product requirements for class 1 UASs
This Appendix constitutes Community harmonisation legislation within the meaning of
Regulation (EC) No 765/2008 and of Decision No 768/2008/EC for class 1 UASs, while the
conformity assessment procedure is defined in Annex II Article II.12.
A class 1 UAS shall:
(a) be made of materials, and shall have performance and physical characteristics, such as to
guarantee that, in the event of an impact with a human body, the severity of the injuries that
can be inflicted by the UA does not exceed AIS level 2; in any case, the UAS must have a
maximum take-off mass (MTOM), including payload, of less than 25 kg;
(b) have performance limitations or an active system limiting the attainable height of the UA to
a maximum of 50 m above the ground level;
(c) be safely controllable without any training courses;
(d) comply with the following requirements:
I. Physical and mechanical properties
1. The UAS must have the requisite mechanical strength and, where appropriate, stability,
to withstand the stresses to which it is subjected during use without breakage or deformation
interfering with its safe flight.
II. Flammability
1. The UAS must not constitute a dangerous flammable element in its normal operational
environment.
2. The UAS must not be explosive or contain elements or substances likely to explode.
III. Electrical properties
1. The UAS shall not be powered by electricity of a nominal voltage exceeding 24 volts
direct current (DC) or the equivalent alternating current (AC) voltage, and its accessible parts
shall not exceed 24 volts DC or the equivalent AC voltage.
Internal voltages shall not exceed 24 volts DC or the equivalent AC voltage unless it is
ensured that the voltage and current combination generated does not lead to any risk or
harmful electric shock, even when the UAS is broken.
2. Parts of the UAS which are connected to, or likely to come into contact with, a source of
electricity capable of causing an electric shock, together with the cables or other conductors
through which electricity is conveyed to such parts, must be properly insulated and
mechanically protected so as to prevent the risk of such a shock.
3. Under all foreseeable fault conditions, the UAS must provide protection against electrical
hazards arising from an electrical power source.
4. The UAS must provide adequate protection against fire hazards.
5. The UAS must be designed and manufactured in such a way that electric, magnetic and
electromagnetic fields and other radiation generated by the equipment are limited to the
extent necessary for the intended operation, and the UAS must operate at a safe level in
compliance with the generally acknowledged state of the art, taking account of specific EU
measures.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 27 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
6. The UAS must be designed and manufactured in such a way that, if the control system
starts malfunctioning or fails due to a failure of the system itself or an external factor, the
UAS will not cause a significant hazard.
7. The UAS must be designed and manufactured in such a way that it does not present any
health hazards or risk of injury to eyes or skin from lasers, light-emitting diodes (LEDs) or
any other type of radiation;
(e) bear the following label on the UA in a visible manner:
(f) be placed on the market with clear operational instructions highlighting the risks related to
UAS operations;
(g) include information required to use the UAS in accordance with the applicable regulations
on aviation safety, security, privacy and data protection, liability and insurance and the
awareness leaflet defined in Appendix I.12.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 28 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Appendix I.4
Product requirements for class 2 UASs
This Appendix constitutes Community harmonisation legislation within the meaning of
Regulation (EC) No 765/2008 and of Decision No 768/2008/EC for class 2 UASs, while the
conformity assessment procedure is defined in Annex II Article II.12.
A class 2 UAS shall:
(a) be made of materials, and shall have performance and physical characteristics, such as to
guarantee that, in the event of an impact with a human body, the severity of the injuries that
can be inflicted by the UA does not exceed AIS level 4; in any case, the UAS must have a
maximum take-off mass (MTOM), including payload, of less than 25 kg;
(b) in case of a loss of data link, include a reliable and predictable method to recover the UA
that reduces the effect on third parties in the air or on the ground;
(c) be designed to minimise noise emissions;
(d) be safely controllable without any training courses;
(e) include the following design features and functions:
(1) an ‘auto-return home’ function;
(2) a maximum attainable altitude of 50 m above the ground through performance
limitations or an active limitation system;
(3) a geofencing system as per Appendix I.6.a;
(4) an electronic identification system as per Appendix I.6.c;
(5) compliance with the following requirements:
I. Physical and mechanical properties
1. The UAS must have the requisite mechanical strength and, where appropriate,
stability, to withstand the stresses to which it is subjected during use without breakage
or deformation interfering with its safe flight.
II. Flammability
1. The UAS must not constitute a dangerous flammable element in its normal
operational environment.
2. The UAS must not be explosive or contain elements or substances likely to explode.
III. Electrical properties
1. The UAS shall not be powered by electricity of a nominal voltage exceeding 48 volts
direct current (DC) or the equivalent alternating current (AC) voltage, and its
accessible parts shall not exceed 48 volts DC or the equivalent AC voltage.
Internal voltages shall not exceed 48 volts DC or the equivalent AC voltage unless it
is ensured that the voltage and current combination generated does not lead to any risk
or harmful electric shock, even when the UAS is broken.
2. Parts of the UAS which are connected to, or likely to come into contact with, a
source of electricity capable of causing an electric shock, together with the cables or
other conductors through which electricity is conveyed to such parts, must be properly
insulated and mechanically protected so as to prevent the risk of such a shock.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 29 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
3. Under all foreseeable fault conditions, the UAS must provide protection against
electrical hazards arising from an electrical power source.
4. The UAS must provide adequate protection against fire hazards.
5. The UAS must be designed and manufactured in such a way that electric, magnetic
and electromagnetic fields and other radiation generated by the equipment are limited
to the extent necessary for the intended operation, and the UAS must operate at a safe
level in compliance with the generally acknowledged state of the art, taking account
of specific EU measures.
6. The UAS must be designed and manufactured in such a way that, if the control
system starts malfunctioning or fails due to a failure of the system itself or an outside
factor, the UAS does not create a significant hazard.
7. The UAS must be designed and manufactured in such a way that it does not present
any health hazards or risk of injury to eyes or skin from lasers, light-emitting diodes
(LEDs) or any other type of radiation;
(f) be placed on the market with manuals that include an appropriate description of all aspects
that affect the safety of flight, and troubleshooting procedures;
(g) include information required to use the UAS in accordance with the applicable regulations
on aviation safety, security, privacy and data protection, liability and insurance, and the
awareness leaflet defined in Appendix I.12;
(h) bear the following label on the UA in a visible manner:
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 30 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Appendix I.5
Product requirements for class 3 UASs
This Appendix constitutes Community harmonisation legislation within the meaning of
Regulation (EC) No 765/2008 and of Decision No 768/2008/EC for class 3 UASs, while the
conformity assessment procedure is defined in Annex II Article II.12.
The UAS shall:
(a) have a maximum take-off mass (MTOM), including payload, of less than 25 kg;
(b) in case of a loss of data link, include a reliable and predictable method to recover the UA
that reduces the effects on third parties in the air or on the ground;
(c) be designed to minimise noise emissions;
(d) be designed as far as practicable to avoid single failures resulting in a loss of control, or be
equipped with an automatic system ensuring a safe flight termination in case of failures, or
be equipped with an impact energy limitation device;
(e) include the following design features and functions:
(1) an ‘auto-return home’ function;
(2) a geofencing system as per Appendix I.6.b;
(3) a maximum attainable altitude of 150 m of height from the ground, through
performance limitations or an active limitation system;
(4) electronic identification as per Appendix I.6.c;
(5) compliance with the following requirements:
I. Physical and mechanical properties
1. The UAS must have the requisite mechanical strength and, where appropriate,
stability, to withstand the stresses to which it is subjected during use without breakage
or deformation interfering with its safe flight.
II. Flammability
1. The UAS must not constitute a dangerous flammable element in its normal
operational environment.
2. The UAS must not be explosive or contain elements or substances likely to explode.
III. Electrical properties
1. The UAS shall not be powered by electricity of a nominal voltage exceeding 48 volts
direct current (DC) or the equivalent alternating current (AC) voltage, and its
accessible parts shall not exceed 48 volts DC or the equivalent AC voltage.
Internal voltages shall not exceed 48 volts DC or the equivalent AC voltage unless it
is ensured that the voltage and current combination generated does not lead to any risk
or harmful electric shock, even when the UAS is broken.
2. Parts of the UAS which are connected to, or likely to come into contact with, a
source of electricity capable of causing an electric shock, together with the cables or
other conductors through which electricity is conveyed to such parts, must be properly
insulated and mechanically protected so as to prevent the risk of such a shock.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 31 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
3. Under all foreseeable fault conditions, the UAS must provide protection against
electrical hazards arising from an electrical power source.
4. The UAS must provide adequate protection against fire hazards.
5. The UAS must be designed and manufactured in such a way that electric, magnetic
and electromagnetic fields and other radiation generated by the equipment are limited
to the extent necessary for the intended operation, and the UAS must operate at a safe
level in compliance with the generally acknowledged state of the art, taking account
of specific EU measures.
6. The UAS must be designed and manufactured in such a way that, if the control
system starts malfunctioning or fails due to a failure of the system itself or an external
factor, the UAS does not create a significant hazard.
7. The UAS must be designed and manufactured in such a way that it does not present
any health hazards or risk of injury to eyes or skin from lasers, light-emitting diodes
(LEDs) or any other type of radiation;
(f) be placed on the market with manuals that include an appropriate description of all aspects
that affect the safety of flight, and troubleshooting procedures;
(g) bear the following label on the UA in a visible manner:
(h) include information required to use the UAS in accordance with the applicable regulations
on aviation safety, security, privacy and data protection, liability and insurance and the
awareness leaflet defined in Appendix I.12.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 32 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Appendix I.6
Product requirements for UAS components
This Appendix identifies the product requirements for UAS components while the conformity
assessment procedure is defined in Annex II Article II.12.
I.6.a Geofencing class 2
‘Geofencing class 2’ shall mean a permanent automatic function to limit the access of the UA to
airspace areas or volumes provided as geographical limitations based on the UA position and
navigation data. The system shall have the following functions and performance according to
standards acceptable to EASA so that it:
(a) provides an interface to update ‘geographical limitation’ data containing information on
restricted and prohibited airspace areas or volumes defined by electronic data;
(b) automatically prevents the UA from entering any airspace areas or volumes that are limited
for the UA operation;
(c) automatically limits the height above ground to 50 m within accepted tolerances;
(d) smoothly interacts with the control of the flight without adversely affecting the safety of
flight;
(e) provides sufficient information to the remote pilot when approaching limited areas or when
the system engages with the UA flight control system;
(f) provides information on the status of the system and prevents any operation when the
position or navigation data is not valid.
I.6.b Geofencing class 3
‘Geofencing class 3’ shall mean a selectable function to limit the access of the UA to airspace areas
or volumes provided as geographical limitations based on the UA position and navigation data.
The system shall have the following functions and performance according to standards acceptable
to EASA so that it:
(a) provides an interface to update ‘geographical limitation’ data containing information on
restricted and prohibited airspace areas or volumes defined by electronic data;
(b) automatically prevents the UA from entering any airspace areas or volumes that is limited
for the UA operation;
(c) automatically limits the height above ground to 150 m within accepted tolerances;
(d) has a selectable option for operators to switch off the automatic function limiting the access
to one or more restricted areas (‘info mode’), while not affecting the remaining function
limiting the access to prohibited areas;
(e) smoothly interacts with the control of the flight without adversely affecting safety of flight;
(f) provides sufficient information to the remote pilot when approaching limited areas or when
the system engages with the UA flight control system;
(g) when operating in ‘info mode’, provides information about the position and movement of
the UA relative to geographical limitations and height limitations;
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 33 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
(h) provides information on the status of the system and prevents any operation when the
position or navigation data is not valid.
I.6.c Electronic identification
‘Electronic identification’ shall mean a function to identify a UA in flight without direct physical
access to that aircraft. The system shall transmit the following data as applicable according to
standards acceptable to EASA:
(a) the registration of the operator,
(b) the class of the UAS,
(c) the type of UA operation,
(d) the status of its geofencing, and
(e) its position and height.
I.6.d Electronic identification and management
Where required for the airspace of the operation, a management function according to standards
acceptable to EASA should, in addition to the function required under I.6.c, provide functions to:
(a) transmit information on the intended flight plan and changes to it during operation;
(b) receive information on the acceptance of flight plans and related authorisations;
(c) receive information on other manned aircraft or UA operations;
(d) receive information on temporary restricted and prohibited airspace areas or volumes.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 34 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Appendix I.7
Operational declaration form
TBD
[The form shall include the following information:
(a) the operator registration number;
(b) the name of the accountable manager, or the owner in the case of a private operation;
(c) a description of the UAS;
(d) a description of the intended use of the UAS (i.e. the concept of operation);
(e) a reference to the ‘standard scenario’ under which the declaration is made;
(f) reference(s) to any document requested to be produced under the ‘standard scenario’;
(g) the date(s), or period of time, and location(s) where the operation is intended to be
performed.]
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 35 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Appendix I.8
Operational authorisation form
TBD
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 36 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Appendix I.9
Operational authorisation: Application form
TBD
[The form shall include the following information:
(a) the operator registration number;
(b) a description of the UAS and its performance;
(c) a description of the proposed operation of the UAS (i.e. the concept of operation);
(d) a reference to the high-risk ‘standard scenario’ under which the application is made, if
applicable;
(e) all the documentation required in the ‘standard scenario’ or a risk assessment as per
UAS.SPEC.70;
(f) the operational manual as per UAS.SPEC.80;
(g) the date(s), or period of time, and location(s) where the operation is intended to be
conducted.]
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 37 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Appendix I.10
LUC application form
TBD
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 38 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Appendix I.11
Light UA certificate form
TBD
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 39 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Appendix I.12
Awareness leaflet
TBD
[This ‘awareness leaflet’ will raise the attention of the operator about the risks related to UA operations
and provide information about the applicable legislation on aviation safety, security, privacy and data
protection, liability and insurance. Reference will be made to a website providing additional
information.]
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 40 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
ANNEX II
MAKING AVAILABLE ON THE MARKET
Table of contents
Section 1 – GENERAL PROVISIONS
Article II.1. Scope
Article II.2. Definition
Article II.3. Making available on the market
Article II.4. Free movement
Section 2 - OBLIGATIONS OF ECONOMIC OPERATORS
Article II.5. Obligations of manufacturers
Article II.6. Obligations of authorised representatives
Article II.7. Obligations of importers
Article II.8. Obligations of distributors
Article II.9. Cases in which obligations of manufacturers apply to importers and distributors
Article II.10. Identification of economic operators
Section 3 – PRODUCT'S CONFORMITY
Article II.11. Presumption of conformity
Article II.12. Conformity assessment procedures
Article II.13. EU declaration of conformity
Article II.14. General principles of the CE marking
Article II.15. Rules and conditions for affixing the CE marking, the UA class identification
label and the identification number of the notified body
Article II.16. Technical documentation
Section 4 - NOTIFICATION OF CONFORMITY ASSESSMENT BODIES
Article II.17. Notification
Article II.18. Notifying authorities
Article II.19. Requirements relating to notifying authorities
Article II.20. Information obligation on notifying authorities
Article II.21. Requirements relating to notified bodies
Article II.22. Presumption of conformity of notified bodies
Article II.23. Subsidiaries of and subcontracting by notified bodies
Article II.24. Application for notification
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 41 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Article II.25. Notification procedure
Article II.26. Identification numbers and lists of notified bodies
Article II.27. Changes to notifications
Article II.28. Challenge of the competence of notified bodies
Article II.29. Operational obligations of notified bodies
Article II.30. Appeal against decisions of notified bodies
Article II.31. Information obligation on notified bodies
Article II.32. Exchange of experience
Article II.33. Coordination of notified bodies
Section 5 - OBLIGATIONS AND POWERS OF MEMBER STATES
Article II.34. Precautionary principle
Article II.35. General obligation to organise market surveillance
Article II.36. Instructions to the notified body
Article II.37. Procedure for dealing with products presenting a risk at national level
Article II.38. Union safeguard procedure
Article II.39. Compliant product which presents a risk
Article II.40. Formal non-compliance
Section 6 – FINAL AND TRANSITIONAL PROVISIONS
Article II.41. Penalties
Article II.42. Transitional provisions
Appendix II.1 CONFORMITY ASSESSMENT MODULE A
Appendix II.2 CONFORMITY ASSESSMENT MODULES B AND C
Appendix II.3 CONFORMITY ASSESSMENT MODULE H
Appendix II.4 CONTENTS OF TECHNICAL DOCUMENTATION
Appendix II.5 EU DECLARATION OF CONFORMITY
Appendix II.6 SIMPLIFIED EU DECLARATION OF CONFORMITY
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 42 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Section 1 – GENERAL PROVISIONS
Article II.1. Scope
1. This Annex establishes a regulatory framework for the making available on the Union market of UAS
defined in Appendixes I.2 to I.5 as well as UAS components defined in Appendix I.6.
2. At the exception of UAS falling within the scope of Appendixes I.2 to I.5 and placed on the market
by the manufacturer in kit ready-to-assemble, home-built UAS do not fall within the scope of this
Annex.
Article II.2. Definition
1. UAS or UAS component falling within the scope of Article II.1 shall mean product for the purpose
of this Annex.
2. For the purposes of this Annex the following definitions shall apply:
a. ‘making available on the market’ shall mean any supply of a product for distribution,
consumption or use on the Community market in the course of a commercial activity, whether in
return for payment or free of charge;
b. ‘manufacturer’ shall mean any natural or legal person who manufactures a product or has a
product designed or manufactured, and markets that product under his name or trademark;
c. ‘authorised representative’ shall mean any natural or legal person established within the
Community who has received a written mandate from a manufacturer to act on his behalf in
relation to specified tasks with regard to the latter's obligations under the relevant Community
legislation;
d. ‘importer’ shall mean any natural or legal person established within the Community who places
a product from a third country on the Community market;
e. ‘distributor’ shall mean any natural or legal person in the supply chain, other than the
manufacturer or the importer, who makes a product available on the market;
f. ‘economic operators’ shall mean the manufacturer, the authorised representative, the importer
and the distributor;
g. ‘technical specification’ shall mean a document that prescribes technical requirements to be
fulfilled by a product, process or service;
h. ‘harmonised standard’ shall mean a standard adopted by one of the European standardisation
bodies listed in Annex I to Directive 98/34/EC of the European Parliament and of the Council of
22 June 1998 laying down a procedure for the provision of information in the field of technical
standards and regulations and of rules on Information Society services (10) on the basis of a
request made by the Commission in accordance with Article 6 of that Directive;
i. ‘accreditation’ shall mean an attestation by a national accreditation body that a conformity
assessment body meets the requirements set by harmonised standards and, where applicable, any
additional requirements including those set out in relevant sectoral schemes, to carry out a
specific conformity assessment activity;
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 43 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
j. ‘national accreditation body’ shall mean the sole body in a Member State that performs
accreditation with authority derived from the State;
k. ‘conformity assessment’ shall mean the process demonstrating whether specified requirements
relating to a product, process, service, system, person or body have been fulfilled;
l. ‘conformity assessment body’ shall mean a body that performs conformity assessment activities
including calibration, testing, certification and inspection;
m. ‘recall’ shall mean any measure aimed at achieving the return of a product that has already been
made available to the end user;
n. ‘withdrawal’ shall mean any measure aimed at preventing a product in the supply chain from
being made available on the market;
o. ‘peer evaluation’ shall mean a process for the assessment of a national accreditation body by
other national accreditation bodies, carried out in accordance with the requirements of this
Regulation, and, where applicable, additional sectoral technical specifications;
p. ‘market surveillance’ shall mean the activities carried out and measures taken by public
authorities to ensure that products comply with the requirements set out in the relevant
Community harmonisation legislation and do not endanger health, safety or any other aspect of
public interest protection;
q. ‘market surveillance authority’ shall mean an authority of a Member State responsible for
carrying out market surveillance on its territory;
r. ‘release for free circulation’ shall mean the procedure laid down in Article 79 of Council
Regulation (EEC) No 2913/92 of 12 October 1992 establishing the Community Customs Code
(11);
s. ‘CE marking’ shall mean a marking by which the manufacturer indicates that the product is in
conformity with the applicable requirements set out in Community harmonisation legislation
providing for its affixing;
t. ‘Community harmonisation legislation’ shall mean any Community legislation harmonising the
conditions for the marketing of products.
Article II.3. Making available on the market
Member States shall take appropriate measures to ensure that products falling within the scope of this
Annex are made available on the market or put into service only on the condition that they meet the
applicable requirements set out in the relevant Appendixes of this Regulation and do not endanger the
safety of persons, property or the environment when correctly maintained and used in accordance with
the rules defined in this Regulation.
Article II.4. Free movement
Member States shall not impede, for reasons relating to aspects covered by this Regulation, the making
available on the market in their territory of products falling within the scope of this Annex.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 44 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Section 2 - OBLIGATIONS OF ECONOMIC OPERATORS
Article II.5. Obligations of manufacturers
1. When placing their product on the market, manufacturers shall ensure that it has been designed and
manufactured in accordance with the relevant requirements set out in Appendixes I.2 to I.6 of this
Regulation.
2. Manufacturers shall draw up the technical documentation referred to in Article II.16 and carry out
the relevant conformity assessment procedure referred to in Article II.12 or have it carried out.
3. Where compliance of the product with the applicable requirements has been demonstrated by that
conformity assessment procedure, manufacturers shall draw up an EU declaration of conformity and
affix the CE marking.
4. Manufacturers shall keep the technical documentation and the EU declaration of conformity for 10
years after the product has been placed on the market.
5. Manufacturers shall ensure that procedures are in place to ensure that changes in design,
characteristics and software of series products do not alter the compliance of the product or that
relevant conformity assessment procedure is undertaken.
6. Manufacturers shall also ensure that procedures are in place to ensure that software upgrades taking
place after the placing on the market do not alter the compliance of the product.
7. Manufacturers shall ensure that products they have placed on the market bears a type, batch or serial
number or other element allowing its identification, or, where the size or nature of the product does
not allow it, that the required information is provided on the packaging, or in a document
accompanying it.
8. Manufacturers shall indicate on the product their name, registered trade name or registered trade
mark and the postal address at which they can be contacted or, where the size or nature of the product
does not allow it, on its packaging, or in a document accompanying it. The address shall indicate a
single point at which the manufacturer can be contacted. The contact details shall be in a language
easily understood by end-users and market surveillance authorities.
9. Manufacturers shall ensure that the product they have placed on the market bears the class
identification label defined in the related Appendix I.2 to I.5.
10. Manufacturers shall ensure that products placed on the market are accompanied by operational
instructions and safety information in a language which can be easily understood by consumers and
other end-users, as determined by the Member State concerned. In case of UA or UAS, instructions
shall in addition include the information required to use the UA or UAS in accordance with the
applicable legislation with regards to aviation safety, privacy and data protection, liability and
insurance. The leaflet defined in Appendix I.12 will be included in each package. Such instructions
and safety information, as well as any labelling, shall be clear, understandable and intelligible.
11. Manufacturers shall ensure that each product is accompanied by a copy of the EU declaration of
conformity or by a simplified EU declaration of conformity. Where a simplified EU declaration of
conformity is provided, it shall contain the exact internet address where the full text of the EU
declaration of conformity can be obtained.
12. Manufacturers who consider or have reason to believe that products which they have placed on the
market are not in conformity with this Regulation shall immediately take the corrective measures
necessary to bring that product into conformity, to withdraw it or recall it, if appropriate.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 45 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Furthermore, where the product presents a risk, manufacturers shall immediately inform the
competent national authorities of the Member States in which they made the product available on
the market to that effect, giving details, in particular, of the non-compliance, of any corrective
measures taken and of the results thereof.
13. Manufacturers shall, further to a reasoned request from a competent national authority, provide it
with all the information and documentation in paper or electronic form necessary to demonstrate the
conformity of the UA, equipment to control it remotely or critical component with this Regulation,
in a language which can be easily understood by that authority. They shall cooperate with that
authority, at its request, on any action taken to eliminate the risks posed by the product which they
have placed on the market.
Article II.6. Obligations of authorised representatives
1. A manufacturer may, by a written mandate, appoint an authorised representative.
2. The obligations laid down in Article II.5(1) and the obligation to draw up technical documentation
laid down in Article II.5(4) shall not form part of the authorised representative's mandate.
3. An authorised representative shall perform the tasks specified in the mandate received from the
manufacturer. The mandate shall allow the authorised representative to do at least the following:
a. keep the EU declaration of conformity and the technical documentation at the disposal of
national market surveillance authorities for 10 years after the product has been placed on the
market;
b. further to a reasoned request from a competent national authority, provide that authority with
all the information and documentation necessary to demonstrate the conformity of the
product;
c. cooperate with the competent national authorities, at their request, on any action taken to
eliminate the risks posed by the products covered by the authorised representative's mandate.
Article II.7. Obligations of importers
1. Importers shall place only compliant products on the market.
2. Before placing a product on the market importers shall ensure that the appropriate conformity
assessment procedure referred to in Article II.12 has been carried out by the manufacturer and that
the product is in conformity with the essential requirements set out in Appendix I.2 to I.6. They shall
ensure that the manufacturer has drawn up the technical documentation, that the product bears the
CE marking and, in case of UA or UAS, the relevant class identification label and is accompanied
by the documents referred to in Article II.5 (11), and that the manufacturer has complied with the
requirements set out in Article II.5 (7) and (8).
3. Where an importer considers or has reason to believe that a product is not in conformity with the
essential requirements set out in the related Appendix I.2 to I.6, he shall not place the product on the
market until it has been brought into conformity. Furthermore, where product presents a risk, the
importer shall inform the manufacturer and the market surveillance authorities to that effect.
4. Importers shall indicate on the product their name, registered trade name or registered trade mark
and the postal address at which they can be contacted or, where that is not possible, on its packaging
or in a document accompanying the product. This includes cases where the size of the product does
not allow it, or where importers would have to open the packaging in order to indicate their name
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 46 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
and address on product. The contact details shall be in a language easily understood by end-users
and market surveillance authorities.
5. Importers shall ensure that the product is accompanied by operational instructions and safety
information in a language which can be easily understood by consumers and other end-users, as
determined by the Member State concerned. In case of UA or UAS, instructions shall include the
information required to use the UA or UAS in accordance with the applicable legislation with regards
to aviation safety, privacy and data protection, liability and insurance. The leaflet defined in
Appendix I.12 will be included in each package. Such instructions and safety information, as well as
any labelling, shall be clear, understandable and intelligible.
6. Importers shall ensure that, while product is under their responsibility, its storage or transport
conditions do not jeopardise its compliance with the essential requirements set out the related
Appendixes II.2 to II.6.
7. When deemed appropriate with regard to the risks presented by a product, importers shall, to protect
the health and safety of end-users and third-parties, carry out sample testing of products made
available on the market, investigate, and, if necessary, keep a register of complaints, of non-
conforming of products and product system recalls, and shall keep distributors informed of any such
monitoring.
8. Importers who consider or have reason to believe that products which they have placed on the market
is not in conformity with this Regulation shall immediately take the corrective measures necessary
to bring that product into conformity, to withdraw it or recall it, if appropriate. Furthermore, where
the product presents a risk, importers shall immediately inform the competent national authorities of
the Member States in which they made the product available on the market to that effect, giving
details, in particular, of the non-compliance and of any corrective measures taken.
9. Importers shall, for 10 years after the product has been placed on the market, keep a copy of the EU
declaration of conformity at the disposal of the market surveillance authorities and ensure that the
technical documentation can be made available to those authorities, upon request.
10. Importers shall, further to a reasoned request from a competent national authority, provide it with all
the information and documentation in paper or electronic form necessary to demonstrate the
conformity of the product in a language which can be easily understood by that authority. They shall
cooperate with that authority, at its request, on any action taken to eliminate the risks posed by the
product which they have placed on the market.
Article II.8. Obligations of distributors
1. When making a product available on the market distributors shall act with due care in relation to the
requirements of this Regulation.
2. Before making a product available on the market distributors shall verify that the product bears the
CE marking and, in case of UA or UAS, the relevant class identification label, and is accompanied
by the documents referred to in Article II.5 (11), and that the manufacturer and the importer have
complied with the requirements set out in Article II.5 (7) and (8).
3. Distributors shall ensure that the product is accompanied by operational instructions and safety
information in a language which can be easily understood by consumers and other end-users, as
determined by the Member State concerned. In case of UA or UAS, instructions shall include the
information required to use the UA or UAS in accordance with the applicable legislation with regards
to aviation safety, privacy and data protection, liability and insurance. The leaflet defined in
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 47 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Appendix I.12 will be included in each package. Such instructions and safety information, as well as
any labelling, shall be clear, understandable and intelligible.
4. Where a distributor considers or has reason to believe that a product is not in conformity with the
essential requirements set out in the related Appendix I.2 to I.6, he shall not make the product
available on the market until it has been brought into conformity. Furthermore, where the product
presents a risk, the distributor shall inform the manufacturer or the importer to that effect as well as
the market surveillance authorities.
5. Distributors shall ensure that, while a product is under their responsibility, its storage or transport
conditions do not jeopardise its compliance with the essential requirements set out in the related
Appendix I.2 to I.6.
6. Distributors who consider or have reason to believe that a product which they have made available
on the market is not in conformity with this Regulation shall make sure that the corrective measures
necessary to bring that product into conformity, to withdraw it or recall it, if appropriate, are taken.
Furthermore, where the product presents a risk, distributors shall immediately inform the competent
national authorities of the Member States in which they made the product available on the market to
that effect, giving details, in particular, of the non-compliance and of any corrective measures taken.
7. Distributors shall, further to a reasoned request from a competent national authority, provide it with
all the information and documentation in paper or electronic form necessary to demonstrate the
conformity of the product. They shall cooperate with that authority, at its request, on any action taken
to eliminate the risks posed by the product which they have made available on the market.
Article II.9. Cases in which obligations of manufacturers apply to importers and distributors
An importer or distributor shall be considered a manufacturer for the purposes of this Regulation and he
shall be subject to the obligations of the manufacturer under Article II.5, where he places a product on
the market under his name or trade mark or modifies the product already placed on the market in such a
way that compliance with this Regulation may be affected.
Article II.10. Identification of economic operators
Economic operators shall, on request, identify the following to the market surveillance authorities:
(a) any economic operator who has supplied them with a product falling within the scope of this Annex;
(b)any economic operator to whom they have supplied a product falling within the scope of this Annex.
Economic operators shall be able to present the information referred to in the first paragraph for 10 years
after they have been supplied with the product and for 10 years after they have supplied the product.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 48 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Section 3 – PRODUCT'S CONFORMITY
Article II.11. Presumption of conformity
Product which is in conformity with harmonised standards or parts thereof the references of which have
been published in the Official Journal of the European Union shall be presumed to be in conformity
with the relevant product's requirements set out in Appendixes I.2 to I.6 covered by those standards or
parts thereof.
Article II.12. Conformity assessment procedures
1. The manufacturer shall perform a conformity assessment of the product with a view to establish the
class of the product (in case of a UA) and its compliance with the relevant requirements set out in
Appendixes I.2 to I.6. The conformity assessment shall take into account all intended and foreseeable
operating conditions.
2. In assessing the compliance of the product with the relevant requirements set out in Appendixes I.2,
the manufacturer shall use the internal production control set out in Module A of Annex II to
Decision No 768/2008/EC (see Appendix II.1); Where, in assessing the compliance of the product
with the relevant requirements set out in Appendixes I.2 to I.6, the manufacturer has applied
harmonised standards, the references of which have been published in the Official Journal of the
European Union, covering all requirements for the product he shall use the internal production
control set out in Module A of Annex II to Decision No 768/2008/EC (see Appendix II.1);
3. Where, in assessing the compliance of the product with the relevant requirements set out in
Appendixes I.2 to I.6, the manufacturer has not applied or has applied only in part harmonised
standards the references of which have been published in the Official Journal of the European Union,
or where such harmonised standards do not exist, the product shall be submitted with regard to those
essential requirements to either of the following procedures:
a. EU-type examination set out in Module B of Annex II to Decision No 768/2008/EC that is
followed by the conformity to type based on internal production control inset out in Module
C of Annex II to Decision No 768/2008/EC (see Appendix II.2);
b. conformity based on full quality assurance control set out in Module H of Annex II to
Decision No 768/2008/EC (see set out in Appendix II.3).
Article II.13. EU declaration of conformity
1. The EU declaration of conformity referred to in Article II.5 (11) shall, in case of an UA, identify the
class of the product and state that the fulfilment of the corresponding requirements set out in
Appendix 1.2 to 1.6 has been demonstrated.
2. The EU declaration of conformity shall have the model structure set out in Appendix II.5, shall
contain the elements set out in that Appendix and shall be continuously updated. It shall be translated
into the language or languages required by the Member State in which product is placed or made
available on the market.
3. The simplified EU declaration of conformity referred to in Article II.5 (11) shall contain the elements
set out in Appendix II.6 and shall be continuously updated. It shall be translated into the language or
languages required by the Member State in which the product is placed or made available on the
market. The full text of the EU declaration of conformity shall be available at the internet address
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 49 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
referred to in the simplified EU declaration of conformity, in a language or languages required by the
Member State in which the product is placed or made available on the market.
4. Where a product is subject to more than one Union act requiring an EU declaration of conformity, a
single EU declaration of conformity shall be drawn up in respect of all such Union acts. That
declaration shall contain the identification of the Union acts concerned including their publication
references.
5. By drawing up the EU declaration of conformity, the manufacturer shall assume responsibility for
the compliance of the product with the relevant requirements laid down in this Regulation.
Article II.14. General principles of the CE marking
1. Products covered by this Annex and made available on the market shall bear the CE marking and, in
case of an UA, the appropriate class identification label.
2. The CE marking shall be subject to the general principles set out in Article 30 of Regulation (EC) No
765/2008.
3. Member States shall presume that products bearing the CE marking and, for UA, the class
identification label, comply with this Regulation.
4. Products not bearing a CE marking, a class identification label (in case of UA) or which do not
otherwise comply with this Regulation may be shown and used at trade fairs and exhibitions, provided
that they are accompanied by a sign which clearly indicates that they do not comply with this
Regulation and that they will not be made available in the Community before being brought into
conformity.
5. On account of the nature of the product, the height of the CE marking and UA class identification
label affixed to the product may be lower than 5 mm, provided that it remains visible and legible.
Article II.15. Rules and conditions for affixing the CE marking, the UA class
identification label and the identification number of the notified body
1. In case of an UA, the class identification label will be affixed on the right of the CE marking and
have a similar size.
2. The CE marking and the UA class identification label shall be affixed visibly, legibly and indelibly
to the UA, unless that is not possible or not warranted on account of the nature of the UA. The CE
marking and the UA class identification label shall also be affixed visibly and legibly to the
packaging.
3. The CE marking and the UA class identification label shall be affixed before the product is placed on
the market.
4. The CE marking shall be followed by the identification number of the notified body where the
conformity assessment procedure set out in Appendix II.2 is applied.
The identification number of the notified body shall have the same height as the CE marking.
The identification number of the notified body shall be affixed by the notified body itself or, under
its instructions, by the manufacturer or his authorised representative.
5. Member States shall build upon existing mechanisms to ensure correct application of the regime
governing the CE marking and shall take appropriate action in the event of improper use of that
marking.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 50 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Article II.16. Technical documentation
1. The technical documentation shall contain all relevant data or details of the means used by the
manufacturer to ensure that the product complies with the related requirements set out in Appendixes
I.2 to I.6. It shall, at least, contain the elements set out in Appendix II.4.
2. The technical documentation shall be drawn up before the product is placed on the market and shall
be continuously updated.
3. The technical documentation and correspondence relating to any EU-type examination procedure
shall be drawn up in an official language of the Member State in which the notified body is established
or in a language acceptable to that body.
4. Where the technical documentation does not comply with paragraphs 1, 2 or 3 of this Article, and in
so doing fails to present sufficient relevant data or means used to ensure compliance of the product
with the related requirements set out in Appendixes I.2 to I.6, the market surveillance authority may
ask the manufacturer or the importer to have a test performed by a body acceptable to the market
surveillance authority at the expense of the manufacturer or the importer within a specified period in
order to verify compliance with the related requirements set out in Appendixes I.2 to I.6.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 51 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Section 4 - NOTIFICATION OF CONFORMITY ASSESSMENT BODIES
Article II.17. Notification
Member States shall notify the Commission and the other Member States of bodies authorised to carry
out third-party conformity assessment tasks under this Regulation.
Article II.18. Notifying authorities
1. Member States shall designate a notifying authority that shall be responsible for setting up and
carrying out the necessary procedures for the assessment and notification of conformity assessment
bodies and the monitoring of notified bodies, including compliance with Article II.22.
2. Member States may decide that the assessment and monitoring referred to in paragraph 1 shall be
carried out by a national accreditation body within the meaning of and in accordance with Regulation
(EC) No 765/2008.
3. Where the notifying authority delegates or otherwise entrusts the assessment, notification or
monitoring referred to in paragraph 1 to a body which is not a governmental entity, that body shall
be a legal entity and shall comply mutatis mutandis with the requirements laid down in Article II.20.
In addition it shall have arrangements to cover liabilities arising out of its activities.
4. The notifying authority shall take full responsibility for the tasks performed by the body referred to
in paragraph 3.
Article II.19. Requirements relating to notifying authorities
1. A notifying authority shall be established in such a way that no conflict of interest with conformity
assessment bodies occurs.
2. A notifying authority shall be organised and operated so as to safeguard the objectivity and
impartiality of its activities.
3. A notifying authority shall be organised in such a way that each decision relating to notification of a
conformity assessment body is taken by competent persons different from those who carried out the
assessment.
4. A notifying authority shall not offer or provide any activities that conformity assessment bodies
perform or consultancy services on a commercial or competitive basis.
5. A notifying authority shall safeguard the confidentiality of the information it obtains.
6. A notifying authority shall have a sufficient number of competent personnel at its disposal for the
proper performance of its tasks.
Article II.20. Information obligation on notifying authorities
Member States shall inform the Commission of their procedures for the assessment and notification of
conformity assessment bodies and the monitoring of notified bodies, and of any changes thereto.
The Commission shall make that information publicly available.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 52 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Article II.21. Requirements relating to notified bodies
1. For the purposes of notification, a conformity assessment body shall meet the requirements laid down
in paragraphs 2 to 11.
2. A conformity assessment body shall be established under national law of a Member State and have
legal personality.
3. A conformity assessment body shall be a third-party body independent of the organisation it assesses.
A body belonging to a business association or professional federation representing undertakings
involved in the design, manufacturing, provision, assembly, use or maintenance of the product which
it assesses may, on condition that its independence and the absence of any conflict of interest are
demonstrated, be considered such a body.
4. A conformity assessment body, its top level management and the personnel responsible for carrying
out the conformity assessment tasks shall not be the designer, manufacturer, supplier, installer,
purchaser, owner, user or maintainer of the product which they assess, nor the representative of any
of those parties. This shall not preclude the use of assessed product that is necessary for the operations
of the conformity assessment body or the use of such product for personal purposes.
A conformity assessment body, its top level management and the personnel responsible for carrying
out the conformity assessment tasks shall not be directly involved in the design, manufacture or
construction, the marketing, installation, use or maintenance of that product, or represent the parties
engaged in those activities. They shall not engage in any activity that may conflict with their
independence of judgement or integrity in relation to conformity assessment activities for which they
are notified. This shall in particular apply to consultancy services.
Conformity assessment bodies shall ensure that the activities of their subsidiaries or subcontractors
do not affect the confidentiality, objectivity or impartiality of their conformity assessment activities.
5. Conformity assessment bodies and their personnel shall carry out the conformity assessment
activities with the highest degree of professional integrity and the requisite technical competence in
the specific field and shall be free from all pressures and inducements, particularly financial, which
might influence their judgement or the results of their conformity assessment activities, especially as
regards persons or groups of persons with an interest in the results of those activities.
6. A conformity assessment body shall be capable of carrying out all the conformity assessment tasks
assigned to it by Appendix II.2 or II.3 in relation to which it has been notified, whether those tasks
are carried out by the conformity assessment body itself or on its behalf and under its responsibility.
At all times and for each conformity assessment procedure and each kind or category of product in
relation to which it has been notified, a conformity assessment body shall have at its disposal the
necessary:
(a) personnel with technical knowledge and sufficient and appropriate experience to perform the
conformity assessment tasks;
(b) descriptions of procedures in accordance with which conformity assessment is carried out,
ensuring the transparency and the ability of reproduction of those procedures. It shall have
appropriate policies and procedures in place that distinguish between tasks it carries out as a
notified body and other activities;
(c) procedures for the performance of activities which take due account of the size of an undertaking,
the sector in which it operates, its structure, the degree of complexity of the product in question
and the mass or serial nature of the production process.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 53 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
A conformity assessment body shall have the means necessary to perform the technical and
administrative tasks connected with the conformity assessment activities in an appropriate manner.
7. The personnel responsible for carrying out conformity assessment tasks shall have the following:
(a) sound technical and vocational training covering all the conformity assessment activities in
relation to which the conformity assessment body has been notified;
(b) satisfactory knowledge of the requirements of the assessments they carry out and adequate
authority to carry out those assessments;
(c) appropriate knowledge and understanding of the essential requirements set out in Article 3, of
the applicable harmonised standards and of the relevant provisions of Union harmonisation
legislation and of national legislation;
(d) the ability to draw up EU-type examination certificates or quality system approvals, records and
reports demonstrating that assessments have been carried out.
8. The impartiality of the conformity assessment bodies, their top level management and of the personnel
responsible for carrying out the conformity assessment tasks shall be guaranteed.
The remuneration of the top level management and personnel responsible for carrying out the
conformity assessment tasks of a conformity assessment body shall not depend on the number of
assessments carried out or on the results of those assessments.
9. Conformity assessment bodies shall take out liability insurance unless liability is assumed by the
State in accordance with national law, or the Member State itself is directly responsible for the
conformity assessment.
10. The personnel of a conformity assessment body shall observe professional secrecy with regard to all
information obtained in carrying out their tasks under Appendixes II.2 and 3 or any provision of
national law giving effect to them, except in relation to the competent authorities of the Member State
in which its activities are carried out. Proprietary rights shall be protected.
11. Conformity assessment bodies shall participate in, or ensure that their personnel responsible for
carrying out the conformity assessment tasks are informed of, the relevant standardisation activities,
the regulatory activities in the area of UAS and frequency planning, and the activities of the notified
body coordination group established under the relevant Union harmonisation legislation and shall
apply as general guidance the administrative decisions and documents produced as a result of the
work of that group.
Article II.22. Presumption of conformity of notified bodies
Where a conformity assessment body demonstrates its conformity with the criteria laid down in the
relevant harmonised standards or parts thereof the references of which have been published in the
Official Journal of the European Union it shall be presumed to comply with the requirements set out in
Article II.21 in so far as the applicable harmonised standards cover those requirements.
Article II.23. Subsidiaries of and subcontracting by notified bodies
1. Where a notified body subcontracts specific tasks connected with conformity assessment or has
recourse to a subsidiary, it shall ensure that the subcontractor or the subsidiary meets the requirements
set out in Article II.21 and shall inform the notifying authority accordingly.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 54 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
2. Notified bodies shall take full responsibility for the tasks performed by subcontractors or subsidiaries
wherever these are established.
3. Activities may be subcontracted or carried out by a subsidiary only with the agreement of the client.
4. Notified bodies shall keep at the disposal of the notifying authority the relevant documents concerning
the assessment of the qualifications of the subcontractor or the subsidiary and the work carried out
by them under Appendixes II.2 and 3.
Article II.24. Application for notification
1. A conformity assessment body shall submit an application for notification to the notifying authority
of the Member State in which it is established.
2. The application for notification shall be accompanied by a description of the conformity assessment
activities, the conformity assessment module or modules and the product for which that body claims
to be competent, as well as by an accreditation certificate, where one exists, issued by a national
accreditation body attesting that the conformity assessment body fulfils the requirements laid down
in Article II.21.
3. Where the conformity assessment body concerned cannot provide an accreditation certificate, it shall
provide the notifying authority with all the documentary evidence necessary for the verification,
recognition and regular monitoring of its compliance with the requirements laid down in Article II.21.
Article II.25. Notification procedure
1. Notifying authorities may notify only conformity assessment bodies which have satisfied the
requirements laid down in Article II.21.
2. They shall notify conformity assessment bodies to the Commission and the other Member States
using the electronic notification tool developed and managed by the Commission.
3. The notification shall include full details of the conformity assessment activities, the conformity
assessment module or modules and the product concerned and the relevant attestation of competence.
4. Where a notification is not based on an accreditation certificate as referred to in Article II.24(2), the
notifying authority shall provide the Commission and the other Member States with documentary
evidence which attests to the conformity assessment body's competence and the arrangements in place
to ensure that that body will be monitored regularly and will continue to satisfy the requirements laid
down in Article II.21.
5. The body concerned may perform the activities of a notified body only where no objections are raised
by the Commission or the other Member States within two weeks of a notification where an
accreditation certificate is used or within two months of a notification where accreditation is not used.
Only such a body shall be considered a notified body for the purposes of this Regulation.
6. The notifying authority shall notify the Commission and the other Member States of any subsequent
relevant changes to the notification.
Article II.26. Identification numbers and lists of notified bodies
1. The Commission shall assign an identification number to a notified body.
It shall assign a single such number even where the body is notified under several Union acts.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 55 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
2. The Commission shall make publicly available the list of the bodies notified under this Regulation,
including the identification numbers that have been assigned to them and the activities for which they
have been notified.
The Commission shall ensure that the list is kept up to date.
Article II.27. Changes to notifications
1. Where a notifying authority has ascertained or has been informed that a notified body no longer meets
the requirements laid down in Article II.21, or that it is failing to fulfil its obligations, the notifying
authority shall restrict, suspend or withdraw notification as appropriate, depending on the seriousness
of the failure to meet those requirements or fulfil those obligations. It shall immediately inform the
Commission and the other Member States accordingly.
2. In the event of restriction, suspension or withdrawal of notification, or where the notified body has
ceased its activity, the notifying Member State shall take appropriate steps to ensure that the files of
that body are either processed by another notified body or kept available for the responsible notifying
and market surveillance authorities at their request.
Article II.28. Challenge of the competence of notified bodies
1. The Commission shall investigate all cases where it doubts, or doubt is brought to its attention
regarding, the competence of a notified body or the continued fulfilment by a notified body of the
requirements and responsibilities to which it is subject.
2. The notifying Member State shall provide the Commission, on request, with all information relating
to the basis for the notification or the maintenance of the competence of the notified body concerned.
3. The Commission shall ensure that all sensitive information obtained in the course of its investigations
is treated confidentially.
4. Where the Commission ascertains that a notified body does not meet or no longer meets the
requirements for notification, it shall inform the notifying Member State accordingly and request it
to take the necessary corrective measures, including de-notification if necessary.
Article II.29. Operational obligations of notified bodies
1. Notified bodies shall carry out conformity assessments in accordance with the conformity assessment
procedures provided for in Appendixes II.2 and 3.
2. Conformity assessments shall be carried out in a proportionate manner, avoiding unnecessary burdens
for economic operators. Conformity assessment bodies shall perform their activities taking due
account of the size of an undertaking, the sector in which it operates, its structure, the degree of
complexity of the UA or UAS technology in question and the mass or serial nature of the production
process.
In so doing they shall nevertheless respect the degree of rigour and the level of protection required
for the compliance of the UA or UAS with this Regulation.
3. Where a notified body finds that the relevant product's requirements set out in Appendix I.2 to 6 or
corresponding harmonised standards or other technical specifications have not been met by a
manufacturer, it shall require that manufacturer to take appropriate corrective measures and shall not
issue an EU-type examination certificate or a quality system approval.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 56 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
4. Where, in the course of the monitoring of conformity following the issue of an EU-type examination
certificate or a quality system approval, a notified body finds that UA or UAS no longer complies, it
shall require the manufacturer to take appropriate corrective measures and shall suspend or withdraw
the EU-type examination certificate or the quality system approval if necessary.
5. Where corrective measures are not taken or do not have the required effect, the notified body shall
restrict, suspend or withdraw any EU-type examination certificates or quality system approvals, as
appropriate.
Article II.30. Appeal against decisions of notified bodies
Member States shall ensure that an appeal procedure against decisions of the notified bodies is available.
Article II.31. Information obligation on notified bodies
1. Notified bodies shall inform the notifying authority of the following:
(a) any refusal, restriction, suspension or withdrawal of an EU-type examination certificate or a
quality system approval in accordance with the requirements of Appendixes II.2 and 3;
(b) any circumstances affecting the scope of or conditions for notification;
(c) any request for information which they have received from market surveillance authorities
regarding conformity assessment activities;
(d) on request, conformity assessment activities performed within the scope of their notification and
any other activity performed, including cross-border activities and subcontracting.
2. Notified bodies shall, in accordance with the requirements of Appendices II.2 and 3, provide the
other bodies notified under this Regulation carrying out similar conformity assessment activities
covering the same categories of UA or UAS with relevant information on issues relating to negative
and, on request, positive conformity assessment results.
3. Notified bodies shall fulfil information obligations under Appendices II.2 and 3.
Article II.32. Exchange of experience
The Commission shall provide for the organisation of exchange of experience between the Member
States' national authorities responsible for notification policy.
Article II.33. Coordination of notified bodies
The Commission shall ensure that appropriate coordination and cooperation between bodies notified
under this Regulation are put in place and properly operated in the form of a sectoral group of notified
bodies.
Member States shall ensure that the bodies notified by them participate in the work of that group, directly
or by means of designated representatives.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 57 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Section 5 - OBLIGATIONS AND POWERS OF MEMBER STATES
Article II.34. Precautionary principle
When competent authorities of the Member States take measures as provided for in this Annex, and in
particular those referred to in Article II.35, they shall take due account of the precautionary principle.
Article II.35. General obligation to organise market surveillance
Member States shall organise and perform surveillance of the products falling within the scope of this
Annex and placed on the Union market in accordance with Articles 15 to 29 of Regulation (EC) No
765/2008.
Article II.36. Instructions to the notified body
1. Market surveillance authorities may request a notified body to provide information relating to any
EC-type examination certificate which that body has issued or withdrawn, or which relates to any
refusal to issue such a certificate, including the test reports and technical documentation.
2. If a market surveillance authority finds that a product is not in conformity with the related
requirements set out in Appendixes I.3 to I.7, it shall, where appropriate, instruct the notified body
to withdraw the EC-type examination certificate in respect of that product.
Article II.37. Procedure for dealing with products presenting a risk at national level
1. Where the market surveillance authorities of one Member State have sufficient reason to believe that
a product covered by this Regulation presents a risk to the health or safety of persons or to other
aspects of public interest protection covered by this Regulation, they shall carry out an evaluation in
relation to product concerned covering all relevant requirements laid down in this Regulation. The
relevant economic operators shall cooperate as necessary with the market surveillance authorities for
that purpose.
Where, in the course of the evaluation referred to in the first subparagraph, the market surveillance
authorities find that the product does not comply with the requirements laid down in this Regulation,
they shall without delay require the relevant economic operator to take all appropriate corrective
actions to bring the product into compliance with those requirements, to withdraw the product from
the market, or to recall it within a reasonable period, commensurate with the nature of the risk, as
they may prescribe.
The market surveillance authorities shall inform the relevant notified body accordingly.
Article 21 of Regulation (EC) No 765/2008 shall apply to the measures referred to in the second
subparagraph of this paragraph.
2. Where the market surveillance authorities consider that non-compliance is not restricted to their
national territory, they shall inform the Commission and the other Member States of the results of
the evaluation and of the actions which they have required the economic operator to take.
3. The economic operator shall ensure that all appropriate corrective action is taken in respect of all
products concerned that it has made available on the market throughout the Union.
4. Where the relevant economic operator does not take adequate corrective action within the period
referred to in the second subparagraph of paragraph 1, the market surveillance authorities shall take
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 58 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
all appropriate provisional measures to prohibit or restrict the product being made available on their
national market, to withdraw the product from that market or to recall it.
The market surveillance authorities shall inform the Commission and the other Member States,
without delay, of those measures.
5. The information referred to in the second subparagraph of paragraph 4 shall include all available
details, in particular the data necessary for the identification of the non-compliant product, the origin
of the product, the nature of the non-compliance alleged and the risk involved, the nature and
duration of the national measures taken and the arguments put forward by the relevant economic
operator. In particular, the market surveillance authorities shall indicate whether the non-compliance
is due to either of the following:
(a) failure of the product to meet the relevant essential requirements set out in Article 3; or
(b)shortcomings in the harmonised standards referred to in Article 16 conferring a presumption of
conformity.
6. Member States other than the Member State initiating the procedure under this Article shall without
delay inform the Commission and the other Member States of any measures adopted and of any
additional information at their disposal relating to the non-compliance of the product concerned, and,
in the event of disagreement with the adopted national measure, of their objections.
7. Where, within three months of receipt of the information referred to in the second subparagraph of
paragraph 4, no objection has been raised by either a Member State or the Commission in respect of
a provisional measure taken by a Member State, that measure shall be deemed justified.
8. Member States shall ensure that appropriate restrictive measures, such as withdrawal of the product
from the market, are taken in respect of the product concerned without delay.
Article II.38. Union safeguard procedure
1. Where, on completion of the procedure set out in Article II.37 (3) and (4), objections are raised
against a measure taken by a Member State, or where the Commission considers a national measure
to be contrary to Union legislation, the Commission shall without delay enter into consultation with
the Member States and the relevant economic operator or operators and shall evaluate the national
measure. On the basis of the results of that evaluation, the Commission shall decide whether the
national measure is justified or not.
The Commission shall address its decision to all Member States and shall immediately communicate
it to them and the relevant economic operator or operators.
2. If the national measure is considered justified, all Member States shall take the necessary measures
to ensure that the non-compliant product is withdrawn or recalled from their market, and shall inform
the Commission accordingly. If the national measure is considered unjustified, the Member State
concerned shall withdraw that measure.
3. Where the national measure is considered justified and the non-compliance of the product is
attributed to shortcomings in the harmonised standards referred to in point (b) of Article II.37(5) of
this Regulation, the Commission shall apply the procedure provided for in Article 11 of Regulation
(EU) No 1025/2012.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 59 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Article II.39. Compliant product which presents a risk
1. Where, having carried out an evaluation under Article II.37 (1), a Member State finds that although
product is in compliance with this Regulation, it presents a risk to the health or safety of persons or
to other aspects of public interest protection covered by this Regulation, it shall require the relevant
economic operator to take all appropriate measures to ensure that the product concerned, when placed
on the market, no longer presents that risk, to withdraw the product from the market or to recall it
within a reasonable period, commensurate with the nature of the risk, as it may prescribe.
2. The economic operator shall ensure that corrective action is taken in respect of all the products
concerned that he has made available on the market throughout the Union.
3. The Member State shall immediately inform the Commission and the other Member States. That
information shall include all available details, in particular the data necessary for the identification of
the product concerned, the origin and the supply chain of product, the nature of the risk involved and
the nature and duration of the national measures taken.
4. The Commission shall without delay enter into consultation with the Member States and the relevant
economic operator or operators and shall evaluate the national measures taken. On the basis of the
results of that evaluation, the Commission shall decide whether the national measure is justified or
not and, where necessary, propose appropriate measures.
5. The Commission shall address its decision to all Member States and shall immediately communicate
it to them and the relevant economic operator or operators.
Article II.40. Formal non-compliance
1. Without prejudice to Article II.37, where a Member State makes one of the following findings, it
shall require the relevant economic operator to put an end to the non-compliance concerned:
(a) the CE marking has been affixed in violation of Article 30 of Regulation (EC) No 765/2008
or of Article II.14 or II.15 of this Regulation;
(b) the CE marking has not been affixed;
(c) the identification number of the notified body, where the conformity assessment procedure
set out in Appendixes II.2 or II.3 is applied, has been affixed in violation of Article II.15 or
has not been affixed;
(d) the EU declaration of conformity has not been drawn up;
(e) the EU declaration of conformity has not been drawn up correctly;
(f) technical documentation is either not available or not complete;
2. Where the non-compliance referred to in paragraph 1 persists, the Member State concerned shall
take all appropriate measures to restrict or prohibit corresponding product system being made
available on the market or ensure that it is withdrawn or recalled from the market.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 60 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
SECTION 6 – FINAL AND TRANSITIONAL PROVISIONS
Article II.41. Penalties
Member States shall lay down rules on penalties applicable to infringements by economic operators of
the provisions of this Regulation and shall take all measures necessary to ensure that they are enforced.
Such rules may include criminal penalties for serious infringements.
The penalties provided for shall be effective, proportionate and dissuasive.
Article II.42. Transitional provisions
Member States shall not impede, for the aspects covered by this Annex, the making available on the
market or putting into service of products covered by this Annex which are in conformity with the
relevant Union harmonisation legislation applicable before [date of entry into force of this Regulation]
and which was placed on the market before [date of entry into force of this Regulation].
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 61 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Appendix II.1
CONFORMITY ASSESSMENT MODULE A
INTERNAL PRODUCTION CONTROL
1. Internal production control is the conformity assessment procedure whereby the manufacturer fulfils
the obligations laid down in points 2, 3 and 4 of this Appendix, and ensures and declares on his sole
responsibility that the product concerned satisfies the requirements set out in the relevant Appendixes
I.2 to I.6.
2. Technical documentation
The manufacturer shall establish the technical documentation in accordance with Article II.16 of this
Annex.
3. Manufacturing
The manufacturer shall take all measures necessary so that the manufacturing process and its monitoring
ensure compliance of the manufactured product with the technical documentation referred to in point 2
of this Appendix and with the requirements set out in the relevant Appendixes I.2 to I.6.
4. CE marking and EU declaration of conformity
4.1.The manufacturer shall affix the CE marking and, when relevant, the UA class identification label
in accordance with Articles II.14 and 15 of this Annex to each product falling within the scope of
this Annex that satisfies the applicable requirements of this Regulation.
4.2.The manufacturer shall draw up a written EU declaration of conformity for each product and keep it
together with the technical documentation at the disposal of the national authorities for 10 years after
the UA or UAS has been placed on the market. The EU declaration of conformity shall identify the
UA or UAS for which it has been drawn up.
A copy of the EU declaration of conformity shall be made available to the relevant authorities upon
request.
5. Authorised representative
The manufacturer's obligations set out in point 4 may be fulfilled by his authorised representative, on
his behalf and under his responsibility, provided that they are specified in the mandate.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 62 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Appendix II.2
CONFORMITY ASSESSMENT MODULES B AND C
EU-TYPE EXAMINATION AND CONFORMITY TO TYPE BASED ON INTERNAL
PRODUCTION CONTROL
When reference is made to this Appendix, the conformity assessment procedure shall follow Modules B
(EU-type examination) and C (Conformity to type based on internal production control) of this
Appendix.
Module B
EU-type examination
1. EU-type examination is the part of a conformity assessment procedure in which a notified body
examines the technical design of the product and verifies and attests that the technical design of the UA
or UAS meets the requirements set out in the relevant Appendixes I.2 to 6.
2. EU-type examination shall be carried out by assessment of the adequacy of the technical design of
the product through examination of the technical documentation and supporting evidence referred to in
point 3, without examination of a specimen (design type).
3. The manufacturer shall lodge an application for EU-type examination with a single notified body of
his choice.
The application shall include:
(a) the name and address of the manufacturer and, if the application is lodged by the authorised
representative, his name and address as well;
(b) a written declaration that the same application has not been lodged with any other notified
body;
(c) the technical documentation. The technical documentation shall make it possible to assess
the product's conformity with the applicable requirements of this Regulation and shall
include an adequate analysis and assessment of the risk(s). The technical documentation shall
specify the applicable requirements and cover, as far as relevant for the assessment, the
design, manufacture and operation of the product. The technical documentation shall
contain, wherever applicable, the elements set out in Article II.16 of this Annex;
(d) the supporting evidence for the adequacy of the technical design solution. That supporting
evidence shall mention any documents that have been used, in particular where the relevant
harmonised standards have not been applied or have not been fully applied. The supporting
evidence shall include, where necessary, the results of tests carried out in accordance with
other relevant technical specifications by the appropriate laboratory of the manufacturer, or
by another testing laboratory on his behalf and under his responsibility.
4. The notified body shall examine the technical documentation and supporting evidence to assess the
adequacy of the technical design of the product.
5. The notified body shall draw up an evaluation report that records the activities undertaken in
accordance with point 4 and their outcomes. Without prejudice to its obligations as provided in point
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 63 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
8, the notified body shall release the content of that report, in full or in part, only with the agreement
of the manufacturer.
6. Where the type meets the requirements of this Regulation that apply to the product concerned, the
notified body shall issue an EU-type examination certificate to the manufacturer. That certificate
shall contain the name and address of the manufacturer, the conclusions of the examination, the
product call if relevant, the aspects of the requirements covered by the examination, the conditions
(if any) for its validity and the necessary data for identification of the assessed type. The EU-type
examination certificate may have one or more annexes attached.
The EU-type examination certificate and its annexes shall contain all relevant information to allow the
conformity of the product with the examined type to be evaluated and to allow for in-service control.
Where the type does not satisfy the applicable requirements of this Regulation, the notified body shall
refuse to issue an EU-type examination certificate and shall inform the applicant accordingly, giving
detailed reasons for its refusal.
7. The notified body shall keep itself apprised of any changes in the generally acknowledged state of the
art which indicate that the approved type may no longer comply with the applicable requirements of
this Regulation, and shall determine whether such changes require further investigation. If so, the
notified body shall inform the manufacturer accordingly.
The manufacturer shall inform the notified body that holds the technical documentation relating to
the EU-type examination certificate of all modifications to the approved type that may affect the
conformity of the product with the essential requirements of this Regulation or the conditions for
validity of that certificate. Such modifications shall require additional approval in the form of an
addition to the original EU-type examination certificate.
8. Each notified body shall inform its notifying authority concerning the EU-type examination
certificates and/or any additions thereto which it has issued or withdrawn, and shall, periodically or
upon request, make available to its notifying authority the list of such certificates and/or any additions
thereto refused, suspended or otherwise restricted.
Each notified body shall inform the other notified bodies concerning the EU-type examination
certificates and/or any additions thereto which it has refused, withdrawn, suspended or otherwise
restricted, and, upon request, concerning such certificates and/or additions thereto which it has issued.
Each notified body shall inform the Member States of EU-type examination certificates it has issued
and/or additions thereto in those cases where harmonised standards the references of which have been
published in the Official Journal of the European Union have not been applied or not been fully
applied. The Member States, the Commission and the other notified bodies may, on request, obtain a
copy of the EU-type examination certificates and/or additions thereto. On request, the Member States
and the Commission may obtain a copy of the technical documentation and the results of the
examinations carried out by the notified body. The notified body shall keep a copy of the EU-type
examination certificate, its annexes and additions, as well as the technical file including the
documentation submitted by the manufacturer for 10 years after the product has been assessed or until
the expiry of the validity of that certificate.
9. The manufacturer shall keep a copy of the EU-type examination certificate, its annexes and additions
together with the technical documentation at the disposal of the national authorities for 10 years after
the product has been placed on the market.
10. The manufacturer's authorised representative may lodge the application referred to in point 3 and
fulfil the obligations set out in points 7 and 9, provided that they are specified in the mandate.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 64 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Module C
Conformity to type based on internal production control
1. Conformity to type based on internal production control is the part of a conformity assessment
procedure whereby the manufacturer fulfils the obligations laid down in points 2 and 3, and ensures and
declares that the product concerned is in conformity with the type described in the EU-type examination
certificate and satisfies the requirements of this Regulation that apply to it.
2. Manufacturing
The manufacturer shall take all measures necessary so that the manufacturing process and its monitoring
ensure conformity of the manufactured product with the approved type described in the EU-type
examination certificate and with the requirements of this Regulation that apply to it.
3. CE marking and EU declaration of conformity
3.1.The manufacturer shall affix the CE marking and, when relevant, the UA class identification label
in accordance with Articles II.14 and 15 of this Annex to each product that is in conformity with the
type described in the EU-type examination certificate and satisfies the applicable requirements of
this Regulation.
3.2.The manufacturer shall draw up a written EU declaration of conformity for each product type and
keep it at the disposal of the national authorities for 10 years after the product has been placed on
the market. The EU declaration of conformity shall identify the product type for which it has been
drawn up.
A copy of the EU declaration of conformity shall be made available to the relevant authorities upon
request.
4. Authorised representative
The manufacturer's obligations set out in point 3 may be fulfilled by his authorised representative, on
his behalf and under his responsibility, provided that they are specified in the mandate.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 65 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Appendix II.3
CONFORMITY ASSESSMENT MODULE H
CONFORMITY BASED ON FULL QUALITY ASSURANCE
1. Conformity based on full quality assurance is the conformity assessment procedure whereby the
manufacturer fulfils the obligations laid down in points 2 and 5, and ensures and declares on his sole
responsibility that the product concerned satisfies the requirements of the Regulation that apply to it.
2. Manufacturing
The manufacturer shall operate an approved quality system for design, manufacture, final inspection and
testing of the product concerned as specified in point 3 and shall be subject to surveillance as specified
in point 4.
3. Quality system
3.1.The manufacturer shall lodge an application for assessment of his quality system with the notified
body of his choice, for the product concerned.
The application shall include:
(a) the name and address of the manufacturer and, if the application is lodged by the authorised
representative, his name and address as well;
(b)the technical documentation for each type of product intended to be manufactured. The technical
documentation shall contain, wherever applicable, the elements set out in Appendix II.4;
(c) the documentation concerning the quality system; and
(d)a written declaration that the same application has not been lodged with any other notified body.
3.2.The quality system shall ensure compliance of the product with the relevant requirements of this
Regulation.
All the elements, requirements and provisions adopted by the manufacturer shall be documented in
a systematic and orderly manner in the form of written policies, procedures and instructions. That
quality system documentation shall permit a consistent interpretation of the quality programmes,
plans, manuals and records.
It shall, in particular, contain an adequate description of:
(a) the quality objectives and the organisational structure, responsibilities and powers of the
management with regard to design and product quality;
(b)the technical design specifications, including standards, that will be applied and, where the
relevant harmonised standards will not be applied in full, the means that will be used to ensure
that the relevant requirements of this Regulation will be met;
(c) the design control and design verification techniques, processes and systematic actions that will
be used when designing a product pertaining to the product type covered;
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 66 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
(d)the corresponding manufacturing, quality control and quality assurance techniques, processes and
systematic actions that will be used;
(e) the examinations and tests that will be carried out before, during and after manufacture, and the
frequency with which they will be carried out;
(f) the quality records, such as inspection reports and test data, calibration data, reports concerning
the qualifications of the personnel, etc.;
(g)the means of monitoring the achievement of the required design and product quality and the
effective operation of the quality system.
3.3.The notified body shall assess the quality system to determine whether it satisfies the requirements
referred to in point 3.2.
It shall presume conformity with those requirements in respect of the elements of the quality system
that comply with the corresponding specifications of the relevant harmonised standard.
In addition to experience in quality management systems, the auditing team shall have at least one
member experienced as an assessor in the relevant UA or UAS field and UA or UAS technology
concerned, and knowledge of the applicable requirements of this Regulation. The audit shall include
an assessment visit to the manufacturer's premises. The auditing team shall review the technical
documentation referred to in point 3.1(b) to verify the manufacturer's ability to identify the applicable
requirements of this Regulation and to carry out the necessary examinations with a view to ensuring
compliance of the UA or UAS with those requirements.
The manufacturer or his authorised representative shall be notified of the decision.
The notification shall contain the conclusions of the audit and the reasoned assessment decision.
3.4.The manufacturer shall undertake to fulfil the obligations arising out of the quality system as
approved and to maintain it so that it remains adequate and efficient.
3.5.The manufacturer shall keep the notified body that has approved the quality system informed of any
intended change to the quality system.
The notified body shall evaluate any proposed changes and decide whether the modified quality
system will continue to satisfy the requirements referred to in point 3.2 or whether a reassessment is
necessary.
It shall notify the manufacturer of its decision. The notification shall contain the conclusions of the
examination and the reasoned assessment decision.
4. Surveillance under the responsibility of the notified body
4.1.The purpose of surveillance is to make sure that the manufacturer duly fulfils the obligations arising
out of the approved quality system.
4.2.The manufacturer shall, for assessment purposes, allow the notified body access to the design,
manufacture, inspection, testing and storage sites, and shall provide it with all necessary information,
in particular:
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 67 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
(a) the quality system documentation;
(b)the quality records as provided for by the design part of the quality system, such as results of
analyses, calculations, tests, etc.;
(c) the quality records as provided for by the manufacturing part of the quality system, such as
inspection reports and test data, calibration data, reports concerning the qualifications of the
personnel, etc.
4.3.The notified body shall carry out periodic audits to make sure that the manufacturer maintains and
applies the quality system and shall provide the manufacturer with an audit report.
4.4.In addition, the notified body may pay unexpected visits to the manufacturer. During such visits, the
notified body may, if necessary, carry out UA or UA system tests, or have them carried out, in order
to check the proper functioning of the quality system. It shall provide the manufacturer with a visit
report and, if tests have been carried out, with a test report.
5. CE marking and EU declaration of conformity
5.1.The manufacturer shall affix the CE marking and, when relevant, the UA class identification label
in accordance with Articles II.14 and 15 of this Annex and, under the responsibility of the notified
body referred to in point 3.1 of this Appendix, the latter's identification number to each product that
satisfies the applicable requirements of this Regulation.
5.2.The manufacturer shall draw up a written EU declaration of conformity for each product type and
keep it at the disposal of the national authorities for 10 years after the product has been placed on
the market. The EU declaration of conformity shall identify the product type for which it has been
drawn up.
A copy of the EU declaration of conformity shall be made available to the relevant authorities upon
request.
6. The manufacturer shall, for a period ending 10 years after the product has been placed on the market,
keep at the disposal of the national authorities:
(a) the technical documentation referred to in point 3.1;
(b) the documentation concerning the quality system referred to in point 3.1;
(c) the change referred to in point 3.5, as approved;
(d) the decisions and reports of the notified body referred to in points 3.5, 4.3 and 4.4.
7. Each notified body shall inform its notifying authority of quality system approvals issued or
withdrawn, and shall, periodically or upon request, make available to its notifying authority the list
of quality system approvals refused, suspended or otherwise restricted.
Each notified body shall inform the other notified bodies of quality system approvals which it has
refused, suspended or withdrawn, and, upon request, of quality system approvals which it has issued.
8. Authorised representative
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 68 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
The manufacturer's obligations set out in points 3.1, 3.5, 5 and 6 may be fulfilled by his authorised
representative, on his behalf and under his responsibility, provided that they are specified in the mandate.
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 69 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Appendix II.4
CONTENTS OF TECHNICAL DOCUMENTATION
The technical documentation shall, wherever applicable, contain at least the following elements:
(a) a general description of the UA or UA system including:
1. photographs or illustrations showing external features, marking and internal layout;
2. versions of software or firmware affecting compliance with essential requirements;
3. user information and installation instructions;
(b) conceptual design and manufacturing drawings and schemes of components, sub-assemblies,
circuits and other relevant similar elements;
(c) descriptions and explanations necessary for the understanding of those drawings and schemes
and the operation of the UA or UA system;
(d) a list of the harmonised standards applied in full or in part the references of which have been
published in the Official Journal of the European Union, and, where those harmonised standards
have not been applied, descriptions of the solutions adopted to meet the essential requirements
set out in Article 3, including a list of other relevant technical specifications applied. In the event
of partly applied harmonised standards, the technical documentation shall specify the parts which
have been applied;
(e) copy of the EU declaration of conformity;
(f) where the conformity assessment module in Annex III has been applied, copy of the EU-type
examination certificate and its annexes as delivered by the notified body involved;
(g) results of design calculations made, examinations carried out, and other relevant similar
elements;
(h) test reports;
(i) an explanation of the compliance with the requirement of Article 10(2) and of the inclusion or
not of information on the packaging in accordance with Article 10(10).
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 70 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Appendix II.5
EU DECLARATION OF CONFORMITY
1. Product (type, batch or serial number):
2. Name and address of the manufacturer or his authorised representative:
3. This declaration of conformity is issued under the sole responsibility of the manufacturer.
4. Object of the declaration (identification of the UA or UAS allowing traceability; it may include
a colour image of sufficient clarity where necessary for the identification of the unmanned aircraft or
unmanned aircraft system):
5. The object of the declaration described above is in conformity with the relevant Union
harmonisation legislation Regulation 2014/53/EU. Other Union harmonisation legislation where
applicable
6. References to the relevant harmonised standards used or references to the other technical
specifications in relation to which conformity is declared. References must be listed with their
identification number and version and, where applicable, date of issue:
7. Where applicable, the notified body … (name, number) … performed … (description of
intervention) … and issued the EU-type examination certificate: …
8. Where applicable, description of accessories and components, including software, which allow
the unmanned aircraft or unmanned aircraft system to operate as intended and covered by the EU
declaration of conformity:
9. Additional information:
Signed for and on behalf of: …
(place and date of issue):
(name, function) (signature):
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 71 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Appendix II.6
SIMPLIFIED EU DECLARATION OF CONFORMITY
The simplified EU declaration of conformity referred to in Article 10(9) shall be provided as follows:
Hereby, [Name of manufacturer] declares that the UA [system] type [designation of type of UA or UA
system] is in compliance with Regulation XX/XX/EU.
The full text of the EU declaration of conformity is available at the following internet address:
European Aviation Safety Agency. All rights reserved. ISO 9001 certified.
Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 72 of 72
An agency of the European Union
‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
22 August 2016
Explanatory Note
Explanatory Note on ‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Legal notice: This explanatory note is provided to support the understanding of the ‘Prototype’
Commission Regulation on Unmanned Aircraft Operations published by the European Aviation Safety
Agency.
It represents the current views of the Agency, however it does not constitute any formal commitment on
behalf of the European Aviation Safety Agency nor of the European Commission.
2
Explanatory Note on ‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
1.1 Background: the operation centric concept of operations
Unmanned aircraft is a sector of aviation that is developing very fast and has a great potential for producing new jobs
and growth. This activity must be developed in a safe, secure and environmentally friendly manner and at the same
time respecting the concerns of the citizen concerning privacy and protection of data
Following the publication of an Advance-NPA on 31 July 2015 (A-NPA 2015-10), the Agency has adopted a
Technical Opinion in December 2015.
The Technical Opinion includes 27 concrete proposals for a regulatory framework for all unmanned aircraft (UA) which
is operation centric, proportionate, risk- and performance-based, and establishes three categories as follows:
‘Open’ category (low risk): There is no pre-approval of the design of the unmanned aircraft, of the operator, or
of the pilot. Safety is ensured through compliance with operational limitations, mass limitations as a proxy of
energy, product safety requirements, and a minimum set of operational rules.
‘Specific’ category (medium risk): Authorisation by a national aviation authority (NAA), possibly assisted by a
qualified entity (QE), following a risk assessment performed by the operator. A manual of operations lists the
risk mitigation measures.
‘Certified’ category (higher risk): Requirements comparable to those for manned aviation. Oversight by NAA
(issue of licences and approval of maintenance, operations, training, ATM/ANS and aerodromes organisations)
and by EASA (design and approval of foreign organisations).
The Technical Opinion does not include new draft legal text beyond the one that has been proposed by the Aviation
Strategy. Its purpose is to lay down the foundation for future work, illustrate the contents of the draft changes to the
Basic Regulation and serve as guidance for Member States (MS) to develop or modify their regulations on unmanned
aircraft.
An important point of terminology should be addressed up front. The Draft Basic regulation has introduced two
definitions: one for unmanned aircraft and one for equipment used to remotely control the unmanned aircraft. The
reason was to avoid that the equipment to remotely control the unmanned aircraft be systematically part of the
“certification” of the unmanned aircraft. Therefore the EASA interpretation is that unmanned aircraft covers only the
flying element (the aircraft). As the equipment to remotely control the unmanned aircraft is a key element of its
operations, this equipment must also be regulated by the prototype regulation. A writing convention uses Unmanned
Aircraft System (UAS) to cover both the unmanned aircraft and the equipment to remotely control it. Unmanned
Aircraft System is an internationally recognised definition and its acronym (UAS) well known. A consistency review
has been made to make sure that unmanned aircraft and UAS are used where they should be.
The choice for an operation centric approach is justified by the fact that there is no one on board unmanned aircraft as
of yet. Therefore the consequences of a loss of control of an unmanned aircraft is highly dependent on the operational
environment.
The operation centric approach should be risk-based and proportionate. Intellectually a legislation only based on risk
assessment could work but would lead to a significant burden for operators and competent authorities (e.g. operators
to produce risk assessments, authorities to approve risk assessment). In addition for complex operations conducted
with complex unmanned aircraft, there could be benefit to adopt a certification approach as it would avoid re-doing
compliance demonstration and as it would give confidence to the public. The balance between these considerations
has led to create the three categories. The ‘open’ category does not require any pre-approval as safety is ensured
notably by a combination of measures including requirements and limitations on the operation, the unmanned aircraft
system and the involved personnel and organisations. These general measures are complemented by conditions to
access to airspace determined by the Member States.
The ‘specific’ category requires operators to obtain an authorisation given by the competent authority based on a risk
assessment performed by the operator. As this could be burdensome for authorities and operators, a concept of
standard scenario covering certain types of operations or flights has been developed. As operations with different risk
levels are envisaged, the standard scenario will identify the cases where in lieu of the authorisation, a simple
declaration by the operator will be sufficient to start the operation. These standard scenarios will be included in
Certification Specifications (CS). More details may be found in paragraph 1.10.
3
Explanatory Note on ‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
The rapid development of unmanned aircraft both in terms of technology and in terms of operational use 1 leads
naturally to a performance based approach where requirements are as far as possible expressed in terms of objectives.
As a consequence, they need to be complemented by the development of Industry standards. This standardisation
activities should be a key international priority.
The Draft Basic Regulation has envisaged the use of product legislation 2 as one of the tools to set-up the regulatory
framework for unmanned aircraft. This is mostly valid for small unmanned aircraft where manufacturers are indeed
small organisations that are quite familiar with product legislation. Some of these unmanned aircraft can be considered
as toys, which are regulated by the product legislation. As a consequence, the prototype regulation integrates aviation
safety rules and product legislation. More details on this integration may be found in paragraph 1.5.
Some of the provisions of the prototype rules will contribute to the application of other legislations such as security,
privacy, data protection and environment. For example the requirements for geofencing 3 together with the possibility
for Member States to define zones where the activity of drones is prohibited or limited contributes to security and
privacy. This provides an effective means to adapt unmanned aircraft operations to the specific context of each
Member State. More may be found in paragraph 1.4.
Another significant flexibility is relative to the register of unmanned aircraft operators: Member States have quite an
amount of flexibility in its implementation provided it includes the information required by the rule.
Further flexibility has been provided by introducing in the cover regulation the same paragraph on means of
compliance than in other regulations to introduce the concept of alternative means of compliance (Alt MOC). For
example, this could apply when procedures are defined as Acceptable Means of Compliance (AMC) or in the case of
standard scenarios that should be included in Certification Specifications (CS). The AMC included in such CS may
be complemented by alt MOC.
The cover regulation introduces these operation centric concept in a clear and logical manner. The intention is to
facilitate the understanding of the rules by the general public. The structure of the cover regulation is further described
in paragraph 1.6.
Although not directly covered by this prototype regulation, the intention is that EASA will conduct inspection of
competent authorities (EASA Standardisation) in accordance with the provisions of Commission implementing
regulation (EU) No 628/2013 of 28 June 2013 on working methods of the European Aviation Safety Agency for
conducting standardisation inspections and for monitoring the application of the rules of Regulation (EC) No 216/2008
of the European Parliament and of the Council and repealing Commission Regulation (EC) No 736/2006. This may
be quite challenging when Member States will choose enforcement agencies such as Police to be the competent
authorities for the ‘open’ category. Appropriate working methods will need to be developed.
The operation centric concept is not applicable to indoors operations for the reason that the concept is applicable only
in the Single European Sky Airspace. EASA is aware that in-doors operations are contemplated by stakeholders (for
example: inspection of fuel tanks; checking the stock in warehouse), but assume that such operations will be covered
by other legislations such as health and safety regulations.
1.2 Why ‘prototype’ regulation?
It was agreed with Member States that the Dutch Presidency, the Commission and EASA would develop a roadmap
to provide more clarity on what are the plans to roll out the operation centric concept. The roadmap includes
information on rulemaking tasks, development of standards, research, cooperation with international organisations
and FAA. It was developed during three workshop with Member States (March, April and May 2016) and presented
to Industry at a workshop in June.
However, this roadmap did not fully clarify all issues and EASA decided to produce a prototype regulation for ‘open’
and ‘specific’ categories by the end of the summer. This prototype regulation proposes actual rules 4 providing the
necessary clarity, notably on what are the responsibilities of the Member States and what is the flexibility offered to
1
Paragraph 1.12 further elaborates on this.
2
Regulation (EC) 765/2008 of the European Parliament and Council of 9July 2008 and decision 768/2008/EC of the
European Parliament and the Council of 9 July 2008. This regulation and this decision specify how products can be placed
on the market.
3
‘geofencing’ means an automatic function to limit the access of the unmanned aircraft to airspace areas or volumes
provided as geographical limitations based on the unmanned aircraft position and navigation data.
4
Acceptable means of compliance (AMC) and Guidance material (GM) will be published at a later stage
4
Explanatory Note on ‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
them. It has been called ‘prototype’ to reflect the fact that they should help preparing the formal rulemaking process
that will follow. Indeed, the intention is to publish this ‘prototype’ regulation and gather reactions which will be used
to develop the necessary Notice of Proposed Amendments later this year. Reactions will be collected using a dedicated
mailbox and dedicated workshops.
In addition, as this prototype regulation will be available at the start of the negotiations between the European
Commission, the Council and the Parliament, they may facilitate debates and avoid that the Basic Regulation text
becomes too specific. The detailed cover regulation should become a key elements in these discussions.
1.3 Focus on ‘open’ and ‘specific’ categories
The prototype regulation focuses on the ‘open’ and ‘specific’ categories because these are the areas where the activities
are developing at a quick pace. The ‘certified’ category will be developed in parallel however the requirements for
the ‘certified’ category will be included as amendments to existing manned aircraft regulations and not as part of a
stand-alone regulation. The planning for these amendments is as follows:
RMT.0230 Technical NPA publication Opinion/ Decision
Subject Proposal Input
subtask consultation planned for publication planned
for
Part-ROC ‘Remote New or
B JARUS-ORG NPA 2017/Q2 2018/Q1
operator certificate’ amend
Part-CAT
B Part-ARO JARUS-ORG NPA 2017/Q4 2018/Q3
Amend
Part-ORO
Part-RPL New or JARUS–FCL
C NPA 2017/Q4 2018/Q3
‘Remote pilot licence’ amend ICAO
Part-ARA
C Part-ORA JARUS-FCL NPA 2017/Q4 2018/Q3
Amend
Part-MED
Part-21
Part-M
D Part-66 JARUS-ORG NPA 2018/Q1 2018/Q4
Amend
Part-145
Part-T
Basic
E SERA Amend NPA 2017/Q4 2018/Q3
Implementation UAS
Rules for UA
E low-level traffic Amend JARUS-ATM NPA 2017/Q4 2018/Q3
management
E Part-ACAS Amend ICAO/JARUS-D&A NPA 2017/Q4 2018/Q3
E CS-ACNS Amend NPA 2017/Q4 2018/Q3
JARUS CS-LURS
F CS-UAS New NPA 2017/Q2 2018/Q1
and CS-UAS
JARUS 1309,
F AMC UAS-1309 New NPA 2017/Q2 2018/Q1
EUROCAE
F CS-ETSO Amend Industry MOPS NPA 2018/Q2 2019/Q1
G CS-36 Amend NPA 2018/Q2 2019/Q1
Part-TCO
H Amend NPA 2017/Q4 2018/Q3
PART-ART
1.4 Security; privacy; data protection and insurance
The prototype regulation will not directly address these important issues because they are regulated at European or
National level. They will however contribute to implementing them as follows:
operators must register except if they operate only unmanned aircraft (UA) of the simpler sub-categories;
the Member State may define zones or airspace areas where UA operations are prohibited or restricted: these
can be created, for instance, for security reasons;
obligation for the operator to comply with security requirements (Operator: natural or legal person that operate
the drone);
the pilot of a UA must not fly close to emergency response efforts;
5
Explanatory Note on ‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
the learning objectives for the pilot involved in flying the most complex sub-categories of the ‘open’ category
envisage the knowledge of flight restrictions (e.g. security) and the understanding of ethical airmanship. The
same applies for the competence of a pilot for the ‘specific’ category;
the risk assessment of the ‘specific’ category must take into account areas with special limitations (e.g. for
Security or privacy reasons);
geofencing and electronic identification will be required in the standards of sub-categories A2 and A3 in the
‘open’ category.
Insurance is not regulated by these rules as it falls outside the scope of the EASA’s competencies. However, there
are already existing aviation insurance requirements, as regulation (EC) No 785/2004 establishes minimum insurance
requirements for air carriers and aircraft operators in respect of passengers, baggage, cargo and third parties.
Regulation (EC) 785/2004 excludes ’model aircraft’ below 20kg for the minimum insurance requirements and is,
therefore, applicable to an unmanned aircraft not qualifying as ’model aircraft’. Further explanation on ’model
aircraft’ may be found in paragraph 1.6 (see Article 14). Furthermore, insurance may also be required by national
legislation.
The prototype regulation does not address the issue of anti-drone defences at aerodrome and other sensitive areas
1.5 Structure of the prototype regulation and integration of Aviation Rules and Product Legislation rules
The prototype rules are organised as follows:
A cover regulation that introduces in a clear and logical way the operation centric concept of operation,
Two annexes supporting this cover regulation:
o Annex I (Part-UAS) contains the aviation rules for ‘open’ and ‘specific’ categories and the requirements to
be complied with to obtain a Light UA Operator Certificate (LUC). This LUC is not mandatory for an
operator in the ‘specific’ category however it provides useful privileges.
o Annex II contains the framework for the product legislation: obligations of manufacturers and other
economic operators; conformity assessment procedures; notifying authorities, notified bodies; obligations
and powers of Member States.
The interface between the two annexes is created by defining classes of UAS. As envisaged by article 46.3 of the draft
Basic Regulation, the prototype regulation establishes essential requirements for unmanned aircraft systems so that
they become Community harmonisation legislation within the meaning of Regulation (EC) 765/2008 of the Parliament
and the Council.
The annex for UA operations (Annex I: Part-UAS) introduce in particular the sub-categories of operations for the
‘open’ category. The broad limitations (class of unmanned aircraft systems, pilot competence, etc.) for the sub-
categories are provided in Part-UAS and the associated essential requirements in the sense of regulation (EC) 768/2008
together with examples of conformity assessment are included in several appendices for Part-UAS.
1.6 Cover Regulation
As indicated in paragraph 1.1, a particular effort has been made to introduce the operation centric concept in a clear
and logical manner.
Article 1 provides a detailed scope introducing the operation centric concept and the condition for making available
on the market UAS intended to operate in the ‘open’ category (product legislation). In addition, article 1 provides a
list of important elements of the prototype regulation (e.g. registration, electronic identification and geofencing).
Moreover it excludes the ‘certified’ category from the applicability of this regulation.
Definitions relative to the operations centric concept are included in article 2.
The ones relative to product legislation may be found in Annex II paragraph II.2. The only exception is the definition
of ’placing on the market’ which is provided in article 2, as it is an important one for the understanding of Annex I.
Article 3 provides high level definitions of the categories of operations. Recitals 2 and 3 of the preamble provide the
rationale for the categorisation itself which is based on two main elements: a risk assessment of UA operation, and
the proportionality and progressivity of applicable rules and administrative requirements or procedures. When the first
element is quite self-explanatory, the second one deserve some clarification. The ‘open’ category should be such as
to incorporate a significant number of activities so that the need for authorisations and declarations as envisaged by
the ‘specific’ category is reduced.
6
Explanatory Note on ‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Article 4 lists the main responsibilities of the operator (organisation that operates the UA) relative to safe operations,
registration, electronic identification and geofencing. These are three important elements that contributes to the safety
of the ‘open’ category. Registration and electronic identification help to identify the operators of unmanned aircraft
that would conduct illegal operations. Geofencing together with the definition by Member States of zones where the
circulation of unmanned aircraft is limited or prohibited is a functionality that makes unmanned aircraft remain where
they should be.
Registration of UA operators is envisaged at Member States level. The main requirements are that the registers would
provide the required information and be interoperable. A standard should be developed to ensure interoperable
databases. Registration will also require new resources and it is envisaged that these resources will come from a
proportionate fee to be paid by the people who register as UA operators.
It also clarifies that the operator shall comply with applicable regulations on security, privacy, data protection, liability
insurance and environmental protection. The use of applicable regulations has been made on purpose to address both
national and EU regulation. These obligations have been defined to ensure that other key elements for the public
acceptance of UA are covered. In addition, it empowers competent authorities to designate zones where UA operations
are prohibited or restricted. Usually obligations for operators and authorities are separated but in this case, the idea
was to highlight key items for UAS regulation. Also geofencing and the definition of zones are interrelated.
Article 5 introduces the high level limitations for the ‘open’ category. These are essential for safety, harmonisation
and to remain true to a concept that does not require pre-approvals. It clarifies that the sub-categories are operation
oriented and that their definition rely on three elements: the class of UAS, operational limitations and pilot competence
as appropriate. These three elements ensure proportionate requirements for the ‘open’ category that take into account
the wide range of UAS being used. The requirements for the class of UAS constitute Community harmonisation
legislation in the sense of the Product Legislation. Last but not least, article 5 also provides a link with Part-UAS
which therefore complement it.
Article 6 deals with the ‘specific’ category and highlights that the requirement underlying the ‘specific’ category is a
risk assessment leading to an authorisation after agreement by the Authority. Article 6 also recognises that conducting
systematically risk assessments would be burdensome for authorities and industry alike and as a consequence
introduces the concept of standard scenarios. These standard scenarios will be published by the Agency as
Certification Specifications (CS) where the risk assessment for a specific scenario is already carried out and the
required mitigation measures are identified. Compliance to a standard scenario is an alternative to a risk assessment.
The standard scenario would define if a declaration or an authorisation is necessary. Article 6 also introduces the
concept of a light UA Operator Certificate as another way to comply with the requirement of the ‘specific’ category.
There is no reference to the Product Legislation for the ‘specific’ category. Indeed the design requirement for the UAS
are defined by the risk assessment or the standard scenarios. Finally, article 6 provides a link with Part-UAS which
therefore complements this article.
Article 7 introduces requirements for the providers of safety critical services. The rationale is, for example, to ensure
the quality of data defining the zones in the transmission chain from the Member State to the Operator. It should be
noted that we have included in those requirements some provisions relative to the organisation and the personnel of
the service provider. This is more severe than what we ask for operators because an error done by the service providers
will affect many operators. In addition, operators may be private persons operating unmanned aircraft for recreational
purposes. In such case, it is difficult to put on them organisational requirements.
Article 8 refers to the designation of competent authorities. It makes clear by a reference to the EASA Basic Regulation
that these are the competent authorities for the implementation of Part-UAS. The designation of the notifying authority
for the product Legislation is defined in Annex II. This approach has been chosen to avoid any confusion.
Article 9 defines the responsibilities of the competent authorities in particular the one to define zones regulating the
operations of UA. Although not mentioned here, but as envisaged by the Basic Regulation, the competent authority
may make use of qualified entities.
Article 10 requires competent authorities (aviation) and market surveillance authorities (product legislation) to create
a network for cooperation on safety matters. This would complement the exchange of experience provided by the
European Commission for notifying authorities. The reason is that they both have access to information relative to the
safety of a product and they both may take action to ensure the continued safe operation of a UA.
7
Explanatory Note on ‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Article 11 develops the concept of acceptable means of compliance in a comparable manner to what is done in other
areas such as manned aircraft operations and flight crew licenses. This text includes the concept of alternative means
of compliance (Alt MOC). For example, this could apply when procedures are defined as Acceptable Means of
Compliance (AMC) or in the case of standard scenarios that should be included in Certification Specifications (CS).
The AMC included in such CS may be complemented by alt MOC.
Article 12 defines the different types of zones and requires competent authorities to provide the necessary information
in a form and manner acceptable to the Agency. This form and manner are necessary for standardisation purposes
(inspection of competent authorities to check how they implement the regulations).
Article 13 deals with immediate reaction to a safety problem: this article requires to collect, analyse and exchange
safety information between EASA and the competent authorities. Based on such information, EASA or the relevant
competent authority will take adequate measures. This is an important requirement to ensure proper implementation
of the rules. It is supported by the reporting requirements put on the operators. This article, together with article 11,
ensures that cooperation exists between the EASA, the competent authorities and the Market surveillance authorities.
Article 14 defines the applicability timeframe of this Regulation..
Placing on the market UAS complying with the prototype regulation will be mandatory 2 years after the entry into
force of the regulation. This raises the issue of the legacy unmanned aircraft placed on the market before that date. It
is proposed that such UAS, where the UA has a mass of 250 g or less including payload, are deemed to be classified
as UAS class 0 as defined in Appendix I.2, and can continue to be operated according to operation sub-category A0.
Another important transitional provision is the one that keeps valid the national authorisations or declarations
up to 3 years after entry into force of the regulation after which they need to comply with the new rules.
Article 15 provides the transitional provisions for recreational operations of UA in the frame of associations or clubs
(‘model aircraft’ operations).It is proposed that they can continue to operate as of today in accordance with National
regulations or practices. After 3 years after the entry into force of the regulation an authorisation shall be issued by
the national authorities to associations or clubs taking into account their safety record and defining limitations and
deviations to the subpart B. No risk analysis will be necessary as the idea is that the safety record, the procedures, the
safety culture of the associations and clubs provide an equivalent safety level.
‘Model aircraft’ are not defined but are covered by the reference to leisure flights, air displays, sport or competition
activities.
The reference to associations or clubs has been made because they have a structure, procedures and safety culture that
created good safety record.
This also means that individual hobbyist should either comply with the rules or join an association or club.
The option of excluding ‘model aircraft’ was seriously envisaged taking into account their good safety record. We
had several attempts to make a definition that could accurately separate classical ‘model aircraft’ from unmanned
aircraft. This has proven difficult as a ‘model aircraft’ is indeed an unmanned aircraft, and the variety of model aircraft
goes far beyond manually controlled fixed wing aircraft. As we could not identify a satisfactory definition, the option
of a transition period combined with an authorisation taking into account the good safety record has been adopted. In
our reflexions, we also took into account that the official Fédération Aéronautique Internationale policy is to attract
unmanned aircraft hobbyists. This will allow hobbyists to benefit from the experience of ‘model aircraft’ associations
and clubs. Other reasons to keeping ‘model aircraft’ under the prototype rules are as follows:
Excluding ‘model aircraft’ from these prototype rules would allow operators to declare their UA as a model
and escape to the requirements, therefore opening a safety gap. It must be kept in mind that a significant
number of incidents are caused by UA operated non-commercially;
Member States would have to develop rules for ‘model aircraft’. Not all have such rules. They would have
to provide a definition of ‘model aircraft’ which, as explained above, is not an easy task;
The approach being to consider the risk of the operation, being it commercial or non-commercial, excluding
‘model aircraft’ may not be in line with this principle.
Note 1 concerning articles 14 and 15: The dates have taken notably into account a finding coming from the survey
conducted by the EASA geofencing task force that indicates that the majority of the small unmanned aircraft have a
production life of around two years.
Note 2 concerning product requirements: It is acknowledged that some requirements proposed in the appendices to
Annex I may be difficult to comply with by mass produced ‘model aircraft’, and therefore deeper consultation with
stakeholders will be organised to solve this issue.
8
Explanatory Note on ‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
1.7 Annex II – Product legislation framework
The prototype regulation specifies essential requirements in the sense of Regulation (EC) 765/2008. They detail the
essential requirements included in the Annex IX of the draft Basic Regulation that the UAS must comply with, in
order to be authorised to operate in the ‘open’ category. As envisaged by article 46.3 of the draft Basic Regulation,
these requirements shall constitute Community harmonisation legislation within the meaning of Regulation (EC)
765/2008 of the Parliament and the Council. These means in practice that these requirements will have to be taken
into account in the conformity assessment process leading to the declaration of conformity and CE marking of the
products intended to be operated in the ‘open’ category together with the requirements defined by other legislation
applicable to these products, like for instance the Radio Equipment Directive (RED) 2014/53/EU.
The requirements applicable to the UAS authorised in the ‘open’ category are defined in Appendixes I.2 to I.5 of
Annex I. These requirements create classes of products which will be identified on the product by a specific label to
facilitate enforcement. The legislation ruling the making available of these products on the Union market is provided
in Annex II.
One important dimension of any Community harmonisation legislation consists in the selection by the regulator of the
appropriate conformity assessment procedures (modules) to be provided in the legislation amongst all those provided
by Decision 768/2008/EC of the European Parliament and Council of 9 July 2008. The conformity assessment
procedures may range from a simple declaration of conformity by the manufacturer to a thorough verification based
on full quality assurance for the manufacturer and assessment of the design of the product by a conformity assessment
body notified by the Member State. The selection of the procedure depends on the type of products and industry
involved, the complexity of the requirements and the level of risks covered. It can only be finalised once those elements
will be stabilised. The procedures included in the present prototype rules are only provided as examples.
In order to facilitate the conformity assessment procedures, industry standards may be developed under the
responsibility of the European Standardisation Organisations (ESO). Once published in the Official Journal of the
European Union, compliance to these standards provides a presumption of conformity to the requirements they relate
to. ESO are: the Centre Européen de Normalisation (CEN); Centre Européen de Normalisation for electrical product
(CENELEC) and the European Telecommunications Standard Institute (ETSI). ESO may cooperate with other
Standardisation Bodies (e.g. EUROCAE, SAE, RTCA, ASTM etc.).
Homebuilt UAS and UAS modified by a person other than the manufacturer do not fall under the scope of Regulation
(EC) 765/2008. The reason is that this regulation is meant for mass production of objects for which the compliance
with product standards can be demonstrated.
1.8 Common issues to ‘open’ and ‘specific’ categories
1.8.1 Scope and applicability
The prototype regulation regulates the operation of all unmanned aircraft in the ‘open’ and ‘specific’ category within
the Single European Sky (SES) airspace. It does not regulate ‘state’ operations (e.g. police, military, customs,
firefighting, etc.) because such operations with whatever kind of aircraft are not regulated by the draft Basic
Regulation. However, the draft Basic Regulation has introduced an opt-in provision that could be used by Member
States to put such operations under EU rules.
In line with a risk approach, the prototype regulation applies to commercial and non-commercial activities. This
decision would have a significant impact on existing model aircraft activities if transition provisions had not been
introduced (Article 15 of the cover regulation).
The prototype regulation does not introduce changes to the Standardised European Rules of the Air (SERA). There
will be a need in the short term to review SERA and identify provisions that could hinder operations in the open and
specific categories. For the longer term, it will be necessary to modify such rules to introduce a concept of Traffic
Management system for unmanned aircraft. To fully take into account the range of unmanned aircraft operations, such
concept should address very low level (VLL) below 150 m; the integration into non-segregated airspace (above 150
m and Flight Level 600) and very high altitude operations (above FL 600). The concept should address the interface
between these three domains. This approach developed by JARUS is more encompassing than the UTM (unmanned
aircraft traffic management system) which are usually limited to the VLL. UTM are under discussion now in various
instances (JARUS; EC and the global UTM Standardisation group)
9
Explanatory Note on ‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Transport of passengers is forbidden but the transport of cargo and mail is authorised. Transport of passengers would
indeed change one of the main assumptions made to draft these rules. Transportation of cargo and mail reflects the
experimentations already done in Europe.
1.8.2 Competent authorities
The competent authority for aviation rules in the ‘open’ category and the notifying authority in the sense of the product
legislation will be defined by the Member State.
In the case of the ‘specific’ category, there are two cases:
the operator is located in one of the EASA Member States. In such case, the competent authority for the ‘specific’
category is the one of the principal place of business of the operator. The principal place of business is defined
by the place where the operational and financial management are located. The authorisation given by the
competent authority will be recognised by other competent authorities and the operator will be responsible for
the adaptation of his risk assessment to the local conditions existing in another country;
the operator is located in a third country. In this case, the model adopted for the TCO (Third Country Operator
in commercial air transportation) has not been chosen. Indeed, in the case of TCO, EASA is the competent
authority. However, the risk assessment need a good knowledge of the environment and the authority of the
Member State where the operations are intended is better placed to review the risk assessment. The competent
authority is therefore the one of the state of operations.
1.8.3 Operator and remote pilot responsibilities
They have been clearly separated. The operators responsibilities are of a structural nature, for example, the obligation
to register is on the operator. The remote pilot responsibilities are of a tactical nature and included into UAS.OPEN.40
for the ‘open’ category. For example, the remote pilot should fly the unmanned aircraft within the limit of its user
manual. One noteworthy task is to ensure safe separation from other manned aircraft. Although this is different from
what is defined in SERA, it can be explained by the fact that the unmanned aircraft remote pilot is better placed to
detect another manned aircraft than the reverse also because of the typical smaller size of the unmanned aircraft in
this category. It should be noted that the FAA has adopted the same approach in its Part 107.
1.8.4 Occurrence reporting and analysis
In both ‘open’ and ‘specific’ categories, occurrence reporting by the operator is envisaged in compliance with
Regulation (EU) 376/2014. In the case of the ‘open’ category this is limited to fatal or serious injuries to person or
when a manned aircraft is involved. In the case of the ‘specific’ category, the operator must report to the competent
authority any occurrence that involves injury to any person or damage to any property, vehicle or another aircraft.
1.9 Main issues on ‘open’ category
1.9.1 Limitations
The safety of the ‘open’ category relies in particular on a set of limitations: unmanned aircraft maximum take-off mass
must be below 25kg as a proxy to a limitation in energy, flight are limited to height below 150 m (500ft) above ground
or sea level and the unmanned aircraft must remain in visual line of sight (VLOS) of the remote pilot in order to reduce
the risk of collision with other unmanned aircraft. These limitations are defined in the Part-UAS and its appendices.
The 25 kg limit was chosen because it is quite frequently the limit for ‘model aircraft’ to fly without an approval of
its design. It is also the limit adopted by our main bilateral partners: FAA, ANAC Brazil and Transport Canada. Of
course with such a maximum take-off mass, there is a need to have subcategories in order to have rules proportionate
to the risk. The limitations to 150m and VLOS are very important to mitigate the risk of collision with other aircraft.
1.9.2 Sub-categories
Sub-categories of operations have been created to ensure that the rules remain proportionate.
They are characterised as follows:
10
Explanatory Note on ‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
a class of unmanned aircraft system. The essential requirements for the class of UAS may call for installation
of geofencing functionality and electronic identification;
a set of limitations (maximum height; distance from uninvolved persons; VLOS) as appropriate;
requirement for pilot competence as appropriate.
The combination of these three factors ensures the safety of the sub-category.
Four categories have been defined from A0 to A3, ranging from the less complex to the more complex one.
An important driver for the class of UAS is an objective requirement relative to AIS (Abbreviated Injury Scale).
A UA does not inherently put people at risk, since no pilot or passengers are on-board. The greatest risk is experienced
by those impacted by a UAV on the ground (or possibly in an aircraft). Focusing on people on the ground possibly hit
by a UA, as part of the risk-centric approach it is necessary to define a relationship between the kind / category of UA
and the injury possibly being suffered by an unprotected human hit by the UA. To this aim, the AIS scale is useful.
AIS is an anatomical-based coding system created by the Association for the Advancement of Automotive Medicine
to classify and describe the severity of injuries. It grades injuries according to 6 levels, from minor (0) to fatal (6).
Annex 1 to this explanatory note, provides more details. Based on this injury grade the A0 threshold has been identified
as the maximum weight (and speed) providing a reduced energy such as to make improbable the injury of a person in
case of impact of a UA. These value are set to 250g and a speed of 15 m/s.
The next thresholds A1 and A2 are set to 2 higher grades of injuries in case of impact while there is no threshold for
A3 as for such masses the impact on a person will have serious consequences. The compensating factors in these cases
are competence required to the remote pilot including a specific training to operate in A3 sub-category and the
requirement to fly at minimum distances from uninvolved people persons
The EASA is aware that the definition of uninvolved person will certainly raise a debate but has not proposed one at
this stage.
Another important element to be highlighted is the use of specific functionalities: geofencing and electronic-
identification. For practical reasons, they have been made mandatory only for the sub-categories A2 and A3. The
details of the functionalities are defined in appendix I.6.
Pilot competence requirements have been only introduced for sub-category A3 which is the most complex one. In
other cases compensating factor is a limitation to 50 m for the maximum height above ground level.
A minimum age of 14 has been introduced for categories A1 to A3. This age has been chosen as it is the minimum
age at which student pilot can fly solo in a glider or a balloon after having been authorised by his/ her instructor and
be under the supervision of the instructor.
1.10 Main issues on ‘specific’ category
1.10.1 The risk assessment
The ‘specific’ category is relying on a risk assessment. The key factors to be taken into account are indicated in
paragraph UAS.SPEC.60. An acceptable means of compliance is the Specific Operation Risk Assessment (SORA)
developed by JARUS. The standard scenarios described in paragraph 1.10.2 will already include the risk assessment
of that specific operation. Therefore an operator willing to conduct an operation covered by a standard scenario will
not be required to carry out the risk assessment but only to verify that its operation is not exceeding the envelope
defined in the scenario.
1.10.2 The standard scenarios
As performing systematically risk assessment would prove burdensome for operators and authorities, a concept of
standard scenarios have been introduced. These standard scenarios will be published by EASA and will be based on
the performance of risks assessments for specific type of flights or specific operations (i.e. precision agriculture or
infrastructure inspection). This document will also identify the mitigation measures to ensure the safety of the
operations. EASA considers these standard scenarios as a key to a successful implementation of the ‘specific’
category. Therefore, proposals for such standards are welcome.
11
Explanatory Note on ‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
1.10.3 Authorisation and declarations
As envisaged by the draft Basic Regulation, the operator may receive an authorisation or simply declare compliance
for the low risk cases. The standard scenarios will identify the cases where an authorisation is required before starting
the operation or when a simple declaration to the competent authority, in which the operator states that he will not
exceed the standard scenario envelope and he complies with the defined mitigation, is sufficient.
1.10.4 Optional light UA operator certificate (LUC)
The light UA operator certificate has been introduced as an option. This allows more flexibility to operators
performing operation covered by standard scenarios requiring an authorisation by the competent authority or an
operation not covered by a scenario. In these cases an operator may request a certificate from the competent authority
(LUC – Light UA Operator Certificate) with privileges to authorise those specific operation.
1.11 Consistency with international activities
1.11.1 ICAO
EASA is participating in the ICAO RPAS panel. ICAO has recently released a draft concept of operations which scope
is: << The scope is limited to certified RPAS operating internationally under instrument flight rules (IFR) in non-
segregated airspace and at aerodromes in 2030.>>The panel focus on international IFR operations (close to the
certified category), therefore the risk of inconsistencies is limited at this stage.
1.11.2 JARUS
EASA is involved in JARUS and intends to make maximum use of JARUS products. All deliveries provided by
JARUS have been and will be taken into account in the EASA regulation. For example the risk assessment
methodology (SERA) considered as an AMC for the risk assessment was developed by JARUS.
1.11.3 FAA
FAA and EASA keep each other informed on their activities. Part 107 is the recently adopted FAA regulation for
small unmanned aircraft systems below 25kg. It will create a process that will replace their present exemption process
(around 3000 delivered). It corresponds broadly to our ‘open’ category.
Some common points: MTOM 25kg, operation VLOS; maximum altitude 400ft (we propose 500ft); competence
requirements for the pilot;
Some differences: it does not apply to model aircraft when our prototype regulation does; it does not require
geofencing or identification; no-subcategories; no essential requirements for design.
The use of the Abbreviated Injury Criteria is also coming from discussion we had with FAA when participating into
the ARC for “nano” drones.
1.12 Unmanned aircraft market outlook5: Important growth over the next years
According to a recent market research focusing on small drones which weigh less than 55 pounds (25 kg) including
payloads and which can be controlled remotely the market over the coming years is expected to boom, especially for
quadcopters. Indeed this type of drones has the biggest market size (among four types of drones analysed, namely
fixed wing, quadcopter, nano, hybrid) and it is expected to increase to USD 4.934 million in 2020 from the 2014 value
of USD 663,4 million with a compound annual growth rate (CAGR) for 2015-2020 of 31,42 %. The current second
most important type of drones in terms of market size is the fixed wing one that could reach a value of USD 272,3
million in 2020 (from the 2014 value of USD 61,9 million) with a CAGR for 2015-2020 of 19,95%. However
according to estimate in 2020 the second group could become the hybrid one (currently third) with an expected value
of USD 385,4 million in 2020 and a 2015-2020 CAGR of 66,15%.
In terms of number of drones units, the first, among the four types of drones mentioned above, is the rotary blade that
is expected to reach 3.830.073 units in 2020 (CAGR 2015-2020 33,96%, 887.755 in 2015). The current second group
is the fixed wing one with 17.698 in 2015 (expecting to be fourth in 2020 with 48.365 units, CAGR 2015-2020
22,27%), the current third one is the nano one with 8.110 units in 2015 and 57.721 in 2020 and the current fourth one
5
Main source of input for this paragraph is the market research “UAV Drones Market by Type (Fixed wing, Rotary Blade,
Nano, Hybrid), Application (Law Enforcement, Precision Agriculture, Media and Entertainment, Retail) & Geography
(Americas, Europe, APAC, Row) —Analysis & Forecast to 2020’ MarketsandMarkets, 2015.
12
Explanatory Note on ‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
is the hybrid one (second in 2020 according to projections) with 2.771 units in 2015 and 75.837 in 2020 (CAGR 2015-
2020 69,45%).
Quadcopters held the largest market share of 91% of the overall UAV drones market in 2014. Rotary blade drones
can fly vertically, horizontally, and can hover at the same place which makes them convenient for the applications
where stability of the operation is required, such as media & entertainment, inspection/monitoring, surveying/mapping
among others. Nano and hybrid drones are at the initial stage of their product development due which they hold a
small market size compared to others types of drones. Fixed wing drones are said to be professional drones: they are
mainly preferred by the professionals for the precision agriculture application.
As regards the geographical distribution of drones across world regions, the Americas (U.S., Canada, Mexico, and
Brazil) are expected accounted for the largest share of the global commercial drone market in 2015. The European
region is expected to account for the second largest share (about a third of the Americas figure). Among all the
geographies, the Asia-Pacific region is expected to grow at the highest rate in the next years, at a CAGR of 37.74%
between 2015 and 2020.
Looking at the evolution of drones from 2015 to 2020 by application, the media and entertainment application seem
to account for the highest market share both in 2015 and in the 2020 forecast with a CAGR of 26% (2020 value: USD
1.323,8 million). In 2020 the second largest group for drones’ application could be the inspection and monitoring
(USD 1.228,9 million), followed by precision agriculture, hobbyist and do-it-yourself (DIY), surveying and mapping,
education, law enforcement, retail.
1.13 Initial elements for the impact assessment
1.13.1 List of issues to further analyse
A detailed regulatory impact assessment (RIA) will support the NPA to be published by the end of 2016. A preliminary
list of issues has been defined. These issues will be taken into further consideration, especially where relevant impacts
are foreseen, and a detailed analysis could be included in the RIA, also depending on the feedback provided by the
stakeholders.
- Geofencing systems, e.g.: categories that should install these systems; definition of geographical data format and
reference; way information should be provided to the operator and uploaded in the UA;
- Identification, e.g.: interoperability with other manned aircraft; ways enforcement authorities could identify UA.
- Registration and authorisation, e.g.: minimum threshold; factors to take into consideration (such as privacy, UAS
carrying a HD camera); possibility of declaration as alternative to registration
- Pilot Competence, e.g.: categories for which license is needed; use of online tutorial for less risky sub-categories;
- Procedure for authorities, e.g.: different authorities to identify: aviation, market surveillance and enforcement;
monitoring and enforcement activities; how to check that the flight limitations are respected; training courses;
role of Competent Authorities with regards to oversight, registration, designation and certification; flow of
information of authorities across Member States; resources needed (e.g. for examining a document, testing or
inspecting the UAS, issuing certificates, authorisations and approvals; maintain register of UA operators,
declarations and authorisations and certificates);
- Categorisation, e.g.: sub-categorisation of the ‘open’ category and criteria according to which this should be
done (e.g. weight, risk elements); model aircraft;
- Link to traditional ATM system, e.g.: large number of drone operations and risk of saturating ATM;
performances of some UAS do not comply with ATM requirements; role of traditional Air Navigation Service
Providers (ANSP's); interoperability (e.g. transponders); dedicated Unmanned Traffic Management (UTM);
transition between the ATM and UTM;
- Occurrences reporting, e.g.: category and damage to be reported; how this should be done; by whom (e.g. self-
reporting of the operator);
- Fragmentation of rules, e.g.: currently rules quite fragmented at national level and the need to foster
harmonization;
13
Explanatory Note on ‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
- Product conformity, e.g.: Essential product requirements and conformity assessment modules.
Stakeholders affected: 1) Manufacturing companies; 2) Importers and distributors of products on the market; 3)
Operators (civil private and commercial), including flight crews and maintenance staff; 4) National Authorities
(Competent ones); 5) EASA; 6) ANSP/ATM; 7) Aerodromes; 8) General public; 9) Other airspace users (manned
aircraft)
Safety issues: part of the problem definition in the RIA will be the safety risk assessment. Some initial information
have already been highlighted in the Annual Safety Review 2016 published by EASA 6 occurrences in the European
Central Repository identified 584 occurrences of all severity levels, of which 37 accidents had been classed as
accidents, none of the accidents involved fatalities and there were only four minor injuries reported in the period since
2010. The collection of data on RPAS occurrences is still in its infancy and there is still work to be done to ensure the
correct application of taxonomy terminology related to RPAS. Further analysis is ongoing.
1.13.2 Objectives
The specific objectives to be achieved, as highlighted in the Terms of Reference of RMT.0230, are:
- ensure a high and uniform level of safety for UAS enabling operators to safely operate unmanned aircraft in the
single European sky airspace, especially for high risk operations;
- fostering innovation and development of UAS;
- harmonize the regulatory framework in order to enhance clarity and cover gaps and inconsistencies of a fragmented
system (e.g. cross-border use of UAS);
- foster an operation centric, proportionate, risk- and performance-based regulatory framework taking into account
various important aspects such as privacy, data protection, security, safety.
1.13.3 Options
Options and their impacts will be further analysed in the NPA foreseen for end 2016.
6
http://www.easa.europa.eu/system/files/dfu/209735_EASA_ASR_MAIN_REPORT.pdf
14
Explanatory Note on ‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
Annex 1
The Abbreviated Injury Scale (AIS)
A UA does not inherently put people at risk, since no pilot or passengers are on-board. The greatest risk is experienced
by those impacted by a UA on ground (or possibly on board a manned aircraft). With regard to people on the ground,
possibly hit by a UA, as part of the risk-centric approach it is necessary to define a relationship between the kind /
category of UA and the injury possibly being suffered by an unprotected hit human. To this aim, the AIS scale is useful.
AIS means Abbreviated Injury Scale and it is an anatomical-based coding system created by the Association for the
Advancement of Automotive Medicine to classify and describe the severity of injuries. It grades injuries according to 6
levels, from minor (0) to fatal (6).
These 6 AIS levels can be loosely correlated with a probability of fatality (PoF) as follows:
AIS = 2: PoF < 1%
AIS = 3: PoF < 10%
AIS = 4: PoF < 30%
AIS = 5: PoF < 50%
Kinetic Energy (KE) should be considered as the main contributor to the injury level. For a complete analysis of ground
collision severity, KE should be examined both in terms of magnitude and on a per unit area basis. Nevertheless the
energy level per unit area should not be considered as a good measure to assess the overall damage but only a
complementary tool. Consensus standards will define, where required, constraints on the shape of UAs such that
protruding parts are properly minimized or protected, and this should capture the energy level per unit area aspect.
Globally, KE is the factor taken into account.
Several studies have attempted to determine the correlation between KE transferred to the human body during an impact
and PoF. The most recent estimates for impact with a standing person, averaged on the different body areas of the
person which can be hit, are the following:
PoF (%) KE (Joules) AIS threshold
1 44 2
10 66 3
30 92 4
50 114 5
90 194 6
Multi-rotor aircraft makes up, currently, a large part of commercially available UA in the ‘open’ category. For this class
of UAS, terminal velocity can be considered as a conservative measure of the possible velocity at which they may
collide with objects and people on ground. It has been estimated by recent research that current multi‐rotor UA under
2.2 Kg have about 48.3 Joules of terminal KE per 250 g of mass.
From the above, the following relationships can be established between weight of mass market drones and PoF
assuming that 100% of KE is transferred to the human body during the impact:
- 250 g drone: PoF slightly more than 1%, injuries probably distributed on AIS level 1 / 2 (depending especially
on the body area impacted and the impact direction)
- 500 g drone: PoF slightly more than 30%, injuries probably distributed on AIS level 3 / 4
- 600 g drone: PoF less than 50%, injuries probably distributed on AIS levels 4 / 5
- 1.4 Kg drone: PoF of 90% or higher, injuries probably distributed on AIS levels 5 / 6
It is important to note that a 100% transfer of the UA’s KE to the human body is never the case. During any UA
collision with any object (like human, building or vehicles, etc.), the UA transfers some of its energy to the object,
15
Explanatory Note on ‘Prototype’ Commission Regulation
on Unmanned Aircraft Operations
retains some of its energy (in form of translational and rotational energy) and loses some energy (deformation,
frangibility). Recent studies consider that, in average, 60% of the energy is transferred to the human body in case of
drone impact. This value could be further improved. Material selection directly effects frangibility. Energy absorbing
materials are ideal choices for the construction of UA structural components. It is therefore well possible, to make an
example, that, with a careful design and choice of materials, a 1 Kg UA would be able to demonstrate an average
amount of KE transferred to the human body of less than 90 J putting it into the PoF of less than 30% category.
The above considerations, based on KE and energy transferred to the human body in case of collision, is considered the
main energy criteria to differentiate among UAS classes.
Considering the single constituent of a UA, batteries, and payloads are dense, non-frangible components. Designs that
integrate the payload and batteries into the UA structure are more likely to provide some level of protection to people or
property during a collision. Batteries are quite dense elements but tend to be well‐integrated into the structure of most
multi‐rotor UAS. Camera are integrated in some cases and not in others. On the other side the calculated density of a
camera, much less than the one of a battery, give cameras some frangibility property and therefore some inherent
protection in case of collision with the human body. Motors are even denser than batteries (about the double) but have a
mass about 10 times smaller than the one of the batteries.
16
Lugupeetud mehitamata õhusõidukite käitajad
Euroopa Lennundusohutusamet (edaspidi EASA) on välja töötanud „prototüüp“ regulatsiooni
mehitamata õhusõidukite käitamiseks, mis väljendab EASA esialgset nägemust, milline võiks mehitamata
lennundust puudutav regulatsioon Euroopa Liidu piires tulevikus välja näha.
Lisainfo leiate EASA kodulehelt: http://www.easa.europa.eu/easa-and-you/civil-drones-rpas
Käesoleva kirja manusesse on lisatud nii EASA avaldatud „prototüüp“ regulatsioon kui ka seletuskiri.
Kindlasti on dokument veel toores ja muutub enne lõplikku jõustumist. Seetõttu palubki EASA kõigil
asjast huvitatud osapooltel esitada oma kommentaare, et katta võimalikult paljude osapoolte huvid.
Oma kommentaarid saatke palun inglise keeles e-posti aadressile
[email protected]
ning lisage koopiasse ka
[email protected]. Siis on Lennuametil ülevaade, mis seisukohti Eesti
käitajad omavad.
Vastuseid ootab EASA hiljemalt oktoobri keskpaigaks.
Kuna käesolev kiri on adresseeritud minu kui mehitamata õhusõidukitega tegeleva Lennuameti
inspektori subjektiivsel hinnangul aktiivsematele isikutele, siis palun levitage seda oma
tutvusringkondades, et kõigil asjast huvitatud osapooltel oleks võimalus oma arvamust avaldada.
Juhul kui tekib täiendavaid küsimusi (nt manuses oleva dokumendi sisu tõlgendamisel), võtke julgelt
ühendust.
Lugupidamisega
Karl Rattassep
Lennutegevuse osakonna vaneminspektor
610 3571
www.ecaa.ee | Lõõtsa 5, 11415 Tallinn
Lennuamet