dokumendiregister.ee
OtsingAsutusedMCP
Otsing›Registrite ja Infosüsteemide Keskus
ÜldkäskkiriAvalik

249700 Alusdokumentide kinnitamise KK muutmine, GPS valveseadmed

Registrite ja Infosüsteemide Keskus · 27. september 2022
Viit
88
Registreeritud
27. september 2022
Dokumendi liik
Üldkäskkiri
Funktsioon
5 Majandustegevus
Sari
5-5 Riigihangetega seotud dokumendid
Toimik
5-5-1/2022
Vastutaja
Teele Nässi (Registrite ja Infosüsteemide Keskus, Üldosakond)

Failid

  • 📎88 27.09.2022 Üldkäskkiri.asice2030 KB

Sisu (failidest)

0 OSA: Üldandmed TEATE ANDMED Hanke viitenumber: ⁠249700 Hanke nimetus: ⁠GPS põhiste elektrooniliste valveseadmete rent Teate tüüp: ⁠Hanketeade - TV02 I OSA: Hankija I.1) HANKIJA NIMI JA AADRESSID Registrite ja Infosüsteemide Keskus, Lubja tn 4, 19081, Tallinn, Eesti Kontaktisik : TEELE NÄSSI Tel. : +372 58505692 E-post : [email protected] Veebiaadress (URL): http://www.rik.ee/ (http://www.rik.ee/) I.2) ÜHISHANGE Leping hõlmab ühishanget: ⁠Ei Lepingu sõlmib keskne hankija: ⁠Ei I.3) TEABEVAHETUS Hankedokumendid on kättesaadavad: ⁠tasuta Täpsemat teavet on võimalik saada aadressil: ⁠https://riigihanked.riik.ee/rhr- web/#/procurement/4481288/general-info (https://riigihanked.riik.ee/rhr- web/#/procurement/4481288/general-info) Lisateavet saab: ⁠eespool nimetatud aadressil Pakkumused või osalemistaotlused saata: ⁠https://riigihanked.riik.ee/rhr- web/#/procurement/4481288/tenders (https://riigihanked.riik.ee/rhr- web/#/procurement/4481288/tenders) eespool nimetatud aadressil I.4) HANKIJA LIIK Hankija liik: ⁠Valitsusasutuse hallatav riigiasutus I.5) PÕHITEGEVUS Põhitegevus: ⁠Üldised avalikud teenused II OSA: Ese II.1) HANKE KOGUS VÕI ULATUS II.1.1) Hanke nimetus ja viitenumber: ⁠GPS põhiste elektrooniliste valveseadmete rent (249700) II.1.2) CPV kood: ⁠ Põhikood Täiendkoodid 35125000-6 Järelevalvesüsteemid Lisakood(id) Täiendkoodid 75231240-8 Tingimisi karistatud vangide jälgimisteenused II.1.3) Lepingu liik: ⁠Asjad II.1.4) Lühikirjeldus: ⁠Hankija eesmärgiks on võtta kasutusrendile süüdimõistetute ja vahistatute jälgimiseks mõeldud aktiivjälgimise seadmed (GPS põhised) neljaks aastaks (võimalusega pikendada vajadusel lepingut kuni 5 kuu võrra). Leping hõlmab terviklikku tark- ja riistvaralist lahendust (sh kommertstarkvaralitsentside rent ning tark- ja riistvara paigaldus hankija asukohas), tark- ja riistvara hoolduseteenust, kasutajatuge ning eestikeelset seadmete ja tarkvara koolitust hankija personalile (Eestis, Tallinnas). II.1.5) Eeldatav kogumaksumus: ⁠1 330 000,00 EUR II.1.6) Teave osade kohta Hankeleping on jaotatud osadeks: ⁠Ei II.2) KIRJELDUS II.2.3) Täitmise koht: ⁠Eesti II.2.5) Hindamiskriteeriumid: ⁠ Kvaliteedikriteeriumid: Nimetus Osakaal Süsteemi funktsionaalsus 40 ⁠ Hind: Nimetus Osakaal Seadmete, süsteemi ja lisateenuste rendi 60 arvestuslik kogumaksumus km-ta ⁠ II.2.6) Eeldatav maksumus või suurusjärk: ⁠1 330 000,00 EUR II.2.7) Lepingu, raamlepingu või dünaamilise hankesüsteemi kestus: ⁠Kestus kuudes Kestus kuudes: ⁠48 Seda lepingut võidakse uuendada: ⁠Jah Uuenduste kirjeldus: ⁠Hankedokumendis sätestatud tingimustel täiendavalt kuni 5 kuuks. II.2.10) Alternatiivsete pakkumuste lubatavus: ⁠Ei ole lubatud II.2.11) Täiendavad hankevõimalused: ⁠Ei ole II.2.12) Teave elektrooniliste kataloogide kohta Pakkumused tuleb esitada elektrooniliste kataloogide kujul või pakkumused peavad sisaldama elektroonilist kataloogi: ⁠Ei II.2.13) Teave Euroopa Liidu vahendite kohta: ⁠Ei ole III OSA: Juriidiline, majanduslik, finants- ja tehniline teave III.1) KVALIFITSEERIMISTINGIMUSED III.1.1) Kutsetööga tegelemise sobivus, sealhulgas kutse- või äriregistrisse kuulumisega seotud nõuded: Vaata hankepassist https://riigihanked.riik.ee/rhr-web/#/procurement/4481288/procurement- passport (https://riigihanked.riik.ee/rhr- web/#/procurement/4481288/procurement-passport) või alusdokumendist https://riigihanked.riik.ee/rhr-web/#/procurement/4481288/documents? group=B (https://riigihanked.riik.ee/rhr- web/#/procurement/4481288/documents?group=B) III.1.2) Majanduslik ja finantsseisund: ⁠Vaata hankepassist https://riigihanked.riik.ee/rhr-web/#/procurement/4481288/procurement- passport (https://riigihanked.riik.ee/rhr- web/#/procurement/4481288/procurement-passport) või alusdokumendist https://riigihanked.riik.ee/rhr-web/#/procurement/4481288/documents? group=B (https://riigihanked.riik.ee/rhr- web/#/procurement/4481288/documents?group=B) III.1.3) Tehniline ja kutsealane suutlikkus: ⁠Vaata hankepassist https://riigihanked.riik.ee/rhr-web/#/procurement/4481288/procurement- passport (https://riigihanked.riik.ee/rhr- web/#/procurement/4481288/procurement-passport) või alusdokumendist https://riigihanked.riik.ee/rhr-web/#/procurement/4481288/documents? group=B (https://riigihanked.riik.ee/rhr- web/#/procurement/4481288/documents?group=B) III.2) LEPINGU TINGIMUSED IV OSA: Hankemenetlus IV.1) KIRJELDUS Kiirendatud menetlus: ⁠Ei IV.1.6) Teave elektroonilise oksjoni kohta: ⁠Elektroonilist oksjonit ei kasutata IV.1.8) Hange on hõlmatud Maailma Kaubandusorganisatsiooni hankelepinguga: Jah IV.2) HALDUSALANE TEAVE IV.2.2) Pakkumuste või osalemistaotluste laekumise tähtaeg: ⁠13.10.2022 12:00 IV.2.4) Keeled, milles võib esitada pakkumused või osalemistaotlused: ⁠inglise, eesti IV.2.6) Minimaalne aeg, mille jooksul pakkuja peab pakkumuse jõus hoidma: Kestus kuudes 5 IV.2.7) Pakkumuste avamise aeg: ⁠13.10.2022 13:00 VI OSA: Lisateave VI.1) TEAVE HANKE KORDUMISE KOHTA See on korduv hange: ⁠Ei VI.2) TEAVE ELEKTROONILISTE TÖÖVOOGUDE KOHTA Kasutatakse elektroonilisi tellimusi: ⁠Ei Lubatakse elektrooniliste arvete esitamist: ⁠Jah Kasutatakse elektroonilisi makseid: ⁠Jah VI.3) LISATEAVE Lisateave: ⁠Hanke objektist lähtuvalt ei ole võimalik hanget osadeks jaotada. VI.4) VAIDLUSTUSTE LÄBIVAATAMISE KORD VI.4.1) Läbivaatamise eest vastutav organ Riigihangete vaidlustuskomisjon, Endla 13/Lõkke 5, 10122, Tallinn, Eesti Tel. : +372 6113713 Veebiaadress (URL): http://www.fin.ee/riigihangete-poliitika (http://www.fin.ee/riigihangete-poliitika) VI.4.4) Läbivaatamise korra kohta teavet pakkuv asutus Riigihangete vaidlustuskomisjon, Endla 13/Lõkke 5, 10122, Tallinn, Eesti Tel. : +372 6113713 Veebiaadress (URL): http://www.fin.ee/riigihangete-poliitika (http://www.fin.ee/riigihangete-poliitika) VI.6) ALGSE TEATE VIIDE Teate number ELTs: ⁠2022/S 164-463607 VII OSA: Muudatused VII.1) MUUDETAV VÕI LISATAV TEAVE VII.2) MUU LISATEAVE DIREKTOR KÄSKKIRI 27.09.2022. a nr 88 Tallinn Alusdokumentide muutmine riigihankes „GPS põhiste elektrooniliste valveseadmete rent“ (249700) Justiitsministri 18.04.2007. a määruse nr 20 „Registrite ja Infosüsteemide Keskuse põhimäärus“ § 11 lõike 1 punkt 9 alusel: 1. Tühistan direktori 22.08.2022 käskkirjaga nr 81 kinnitatud: 1.1 Lisa 3 - seadmete ja süsteemi spetsifikatsioon ja pakkumuse vorm; 1.2 Annex 3 - Active electronic surveillance equipment and system specification and tender form; 1.3 Annex 7 - Evaluation Criteria 1.4 Lisa 4 - hankelepingu projekt; 1.5 Annex 4 - Draft Public Contract; 1.6 Hanketeade 2. Kinnitan 2.1. Lisa 3 - seadmete ja süsteemi spetsifikatsioon ja pakkumuse vorm; 2.2 Annex 3 - Active electronic surveillance equipment and system specification and tender form; 2.3 Annex 7 - Evaluation Criteria 2.4 Lisa 4 - hankelepingu projekt; 2.5 Annex 4 - Draft Public Contract; 2.6 Hanketeade /allkirjastatud digitaalselt/ Rivo Reitmann Lisad: Lisa 3 - seadmete ja süsteemi spetsifikatsioon ja pakkumuse vorm; Annex 3 - Active electronic surveillance equipment and system specification and tender form; Annex 7 - Evaluation Criteria Lisa 4 - hankelepingu projekt; Annex 4 - Draft Public Contract; Hanketeade Evaluation criteria and indicators to be assessed Procurement reg nr: 249700 Contracting Authority: Registrite ja Infosüsteemide Keskus (70000310) Procurement: Operating lease of GPS based electronic surveillance equipment Valuation of the bid - Excluding taxes Electronic auctions are used: no Nr Criteria Description Type/method share amount unit tenderer fillable 1 Estimated total cost of the lease of devices, system and cost- least is best 60 additional services, exclusive of VAT Total tender value according to the table in the PAM1 1 yes form (detailed tender cost). to the cost in the table 2 System functionality assessment quality - 40 contracting authority assessable Total 100 Evaluation criteria 1. Estimated total cost of hiring equipment, system and ancillary services per km excluding. 1. Methodology for estimated total value of the tender – evaluation is based on the estimated total value of devices, system and additional services as listed on the price form in ePPR, exclusive of VAT. The lowest estimated total value will have 60 points and the other tenders will receive a proportionally lower score. 2. Methodology for evaluating the system functionality - the evaluation takes into account the capacity of the tenderer to provide the system’s non- mandatory functionality. The respective items are specified in Annex 3 (equipment and system specification and tender form). The points obtained for the functional requirements of the tender are aggregated and the points are converted to 40 points scale so that the highest score is 40 points and the other tenders receive proportionally fewer points. 3. The value of the tender and the points of the functionality of the system are combined and the most successful tender will be recognized. In the case of an equal score, a tender with a lower rental payment per day for a set of active electronic surveillance device is declared successful. If these values are equal, the decision shall be made by drawing lots. 4. The authorized representatives of all tenderers will be allowed to attend the drawing of lots. The number of slips prepared for the drawing of lots will correspond to the number of equal tenders. One slip will include the words “successful tender”, the rest will be left blank. The slips will be placed in opaque containers. The tenderers will draw the containers from the ballot box in the order in which they submitted their tenders (the earliest submitter will draw first). The representative of the tenderer who draws the slip marked as “successful tender” will be declared successful in this procurement. The place and timetable of the drawing of lots will be announced in advance to the tenderers. 2. System functionality Methodology for evaluating the system functionality - the evaluation takes into account the capacity of the tenderer to provide the system’s non-mandatory functionality. The respective items are specified in Annex 3. The points obtained for the functional requirements of the tender are aggregated and the points are converted to 40 points scale so that the highest score is 40 points and the other tenders receive proportionally fewer points. Lisa 4 Riigihanke „GPS põhiste elektrooniliste valveseadmete rent“ (249700) hanke alusdokumentide juurde HANKELEPINGU ERITINGIMUSED ……………………, registrikoodiga …………, asukohaga …………, Tallinn …………, mida esindab ………… alusel ………… ………… (edaspidi nimetatud tellija) ja ……………………, registrikoodiga …………, asukohaga …………, Tallinn …………, mida esindab ………… alusel ………… ………… (edaspidi nimetatud täitja), keda nimetatakse edaspidi pool või koos pooled, sõlmisid käesoleva hankelepingu (edaspidi leping) alljärgnevas: 1. Lepingu ese 1.1. Lepingu esemeks on süüdimõistetute ja vahistatute jälgimiseks mõeldud aktiivjälgimise (GPS põhised) valveseadmete (edaspidi seadmed) ning tervikliku integreeritud tark- ja riistvaralise lahenduse, sealhulgas kõikide vajalike sideteenuste ja litsentside (edaspidi süsteem) rentimine ning tarkvara ja serverite paigalduse, hooldusteenuse, tugiteenuse ja koolituste pakkumine, vastavalt riigihanke „GPS põhiste elektrooniliste valveseadmete rent“ (viitenumber 249700) alusdokumentides ja käesolevas lepingus sätestatule. 1.2. Seadmete ja süsteemi rendiperiood on 48 kuud, mida saab tellija põhjendatud vajaduse korral pikendada kuni 5 kuu võrra. Tellija esitab vastavasisulise teate hiljemalt 90 päeva enne rendiperioodi esialgselt lõppkuupäeva. 1.3. Lepingu alusel antakse kasutusrendile 20 kuni 80 seadet, vastavalt tellija nõudele. 1.4. Pooled kinnitavad, et teevad kõik enesest oleneva, et täita lepingu eesmärgid käesolevas lepingus ning seonduvates õigusaktides sätestatud tingimustel ja mahus. 2. Tellimise protseduur 2.1. Esimene tellimus on 50 seadet vastavalt riigihanke „GPS põhiste elektrooniliste valveseadmete rent“ (viitenumber 249700) alusdokumentidele. Täitja peab töökorras seadmed ja süsteemi olema tellijale üle andnud hiljemalt veebruariks 2023 või 60 päeva möödudes lepingu allkirjastamisest (kui leping allkirjastatakse hiljem kui november 2022). 2.2. Edaspidiselt toimub seadmete tellimine vajaduspõhiselt kirjalikku taasesitamist võimaldavas vormis. Tellimusi on võimalik esitada lepingu kehtivuse perioodil. Tellimused esitatakse tellija kontaktisiku poolt täitja kontaktisikule. Seadmed tuleb tarnida 60 päeva jooksul alates tellimuse esitamisest. Tellimuses: 2.2.1.Märgitakse ära kasutusrendil olevate seadmete koguse suurendamine või vähendamine 15 seadme sammuga kuni maksimaalselt 80 seadmeni. 3. Hind ja maksetingimused 3.1. Lepingu hind moodustub lepingu kehtivuse perioodil kasutusrendile antud seadmete ja süsteemi eest tasutavatest kasutusrendi maksete hinnast. Kasutusrendi hinnas sisaldub seadmete kasutusõigus, kohaletoomine, tööriistad seadmete paigalduseks, vajalikud sideteenused ja litsentsid, tarkvara ja serverite paigaldus, hooldusteenus, tugiteenus ning koolitused. 3.2. Tellija tasub täitjale vastavalt lepingu üldtingimustes toodule. 4. Lepingu jõustumine 4.1. Leping jõustub allkirjastamise hetkest mõlema poole poolt ja kehtib kuni lepingujärgsete kohustuste täitmiseni. 4.2. Kasutusrendiperiood on 48 kuud, mida saab tellija põhjendatud vajaduse korral pikendada kuni 5 kuu võrra. Kasutusrendiperiood hakkab kulgema alates lepingu esemeks olevate seadmete ja süsteemi tellijale üleandmisest. Seadmed tagastatakse rendiperioodi lõppemisel 60 päeva jooksul vastavasisulise üleandmise-vastuvõtu akti allkirjastamise teel. Seadmete tagastamine toimub tellija poolt määratud asukohas Eestis, selle eest eraldi tasu maksmata. Tellija peab võimaldama täitjal teostada tagastamisperioodil seadmete tagastamisega seotud toiminguid. 5. Lepingu dokumendid 5.1. Leping koosneb hankelepingu eritingimustest ja üldtingimustest. Kui eritingimustes on sätestatud teisiti kui üldtingimustes, siis kehtib eritingimustes toodu. 5.2. Lepingu lahutamatuteks osadeks on riigihanke alusdokumendid, üleandmise- ja vastuvõtmise aktid, pooltevahelised kirjalikud teated ning kõik lepingu muudatused ja muud lisad. 5.3. Leping koos lisadega 1 ja 2 on koostatud eesti keeles ja tõlgitud inglise keelde. Kui mõni lepingu ingliskeelse versiooni säte on vastuolus eestikeelse versiooni vastava sõnastusega, kohaldatakse eestikeelset versiooni. 5.4. Lepingu allkirjastamisel on lepingul järgmised lisad: 5.4.1.Lisa 1 - Hankeeseme üldine tehniline kirjeldus; 5.4.2.Lisa 2 - Teenustaseme tingimused (SLA); 5.4.3.Lisa 3 - Seadmete ja süsteemi spetsifikatsioon ja pakkumuse vorm; 5.4.4.Lisa 4 - Pakkumus. 5.5. Kui lepingu dokumendid on oma sisult vastuolulised ja/või nendes antud informatsioon erinevalt tõlgendatav, siis dokumentide pädevusjärjekord (ülimuslik lepingu dokument on nimetatud eespool allolevas loetelus) on järgmine: 5.5.1.Hankelepingu eritingimused; 5.5.2.Hankelepingu üldtingimused; 5.5.3.Tehniline kirjeldus; 5.5.4.Muud riigihanke alusdokumendid; 5.5.5.Pakkumus. 6. Poolte kontaktandmed 6.1. Tellija kontaktandmed on 6.1.1.Tellija esindaja tööde vastuvõtmise aktide, teadete jms lepinguga seonduvate dokumentide allkirjastamisel on ………… ………… (tel: …………, e-post: …………). 6.1.2.Tellija kontaktisik tööde teostamise juhendamisel ning Täitjale vajaliku lähteinformatsiooni ja tööülesannete täpsustamisel jmt. on ………… ………… (tel: …………, elektronpost: …………) 6.2. Täitja kontaktandmed on: 6.2.1.Täitja esindajaks on ………… ………… (tel: …………, e-post: …………). 6.2.2.Täitja kontaktisik on ………… ………… (tel: …………, e-post: ………… ). Käesoleva lepingu allakirjutamisega tõendavad pooled, et on tutvunud ja on nõus lepingu ja selle lisadega ning mõistavad täielikult enesele võetavate kohustuste sisu ning nende tagajärgi. Tellija Täitja ………… ………… /digitaalselt allkirjastatud/ /digitaalselt allkirjastatud/ ………… ………… ………… ………… HANKELEPINGU ÜLDTINGIMUSED 1. Mõisted 1.1. Järgnevad mõisted laienevad nii lepingule kui ka selle osaks olevatele dokumentidele: 1.1.1. Pooled – täitja ja tellija ühise nimetusega. 1.1.2. Leping – hankelepingu eri- ja üldtingimused koos lisadega. Üldtingimuste kontekstis lühendatud terminiga leping. 1.1.3. Eritingimused – lepingu eritingimustes lepitakse kokku üldtingimustes käsitlemata või üldtingimusi täpsustavates küsimustes. Pooled võivad lepingu eritingimustes kokku leppida ka erisusi üldtingimustest, kuid nende puudumisel kohaldatakse üldtingimusi. 1.1.4. Üldtingimused – käesoleva hankelepingu üldtingimused. Kui üldtingimuses ei ole fikseeritud teisiti, tähendavad üldtingimustes viidatud punktid vastavaid üldtingimuste punkte. 1.1.5. Riigihanke alusdokumendid – riigihangete seaduse kohaselt tellija poolt läbiviidava hankemenetlusega seonduv dokumentatsioon. 1.1.6. Seadmed - süüdimõistetute ja vahistatute jälgimiseks mõeldud aktiivjälgimise (GPS põhised) valveseadmed. 1.1.7. Seadmete partii – täitja poolt tellimuse alusel tellijale üheaegselt üle antud seadmete kogum. 1.1.8. Süsteem - terviklik integreeritud tark- ja riistvaraline lahendus kõikide vajalike sideteenuste ja litsentsidega elektroonilise valve teostamiseks. 1.1.9. Rakendus – elektrooniline jälgimisrakendus, mis võimaldab teostada kriminaalhooldusaluste üle järelevalvet. 1.1.10. Asukoht - asukoht tähendab tellija asukohta või muud kokkulepitud kohti, välja arvatud täitja asukoht, kuhu seadmed või süsteem tarnitakse või paigaldatakse. 1.1.11. Puudus ja viga - puuduse või veaga on tegemist juhul, kui seadmed või süsteem ei tööta või ei vasta lepingus või muudes hanke alusdokumentides sätestatud tingimustele. 1.1.12. Tööpäev – tööpäevana käsitletakse kalendripäeva, mis ei ole kas laupäev, pühapäev või rahvuspüha või riigipüha pühade ja tähtpäevade seaduse tähenduses. 1.1.13. Garantii - Garantii sisaldab mittekvaliteetsete või lepingu tingimustele mittevastavate seadmete ümber vahetamist või parandamist täitja kulul ja muid lepingus ja nimetatu lisades toodud tegevusi. 1.1.14. Hooldus- ja tugiteenus - hooldus- ja tugiteenus tähendavad töid, mis tagavad seadmete ja süsteemi toimivuse (korrasoleku, terviklikkuse, jõudluse jms), vastavalt käesolevas lepingus ja nimetatu lisades toodule. 2. Hind ja maksmine Valida õige alternatiiv, esimene alternatiiv raamatupidamiskohustuslastele Eesti Vabariigis ja teine alternatiiv raamatupidamiskohustuslastele väljaspool Eesti Vabariiki. 2.1. Lepingujärgne hind moodustub lepingu kehtivuse perioodil kasutusrendile antud seadmete ja süsteemi eest tasutavast kasutusrendi maksete hinnast, mis sisaldub pakkumuses. 2.2. Lepingujärgne hind on täitja ainuke tasu renditud seadmete, nende kohaletoomise, seadmete paigalduseks vajalike tööriistade, vajalike sideteenuste ja litsentside, tarkvara ja serverite paigalduse, hooldusteenuse, tugiteenuse ning koolituste eest. Täitjal ise ega tema töötajatel ei ole õigust täiendavale autori-, litsentsi- või muule sarnasele tasule seoses lepingu täitmisel kasutatud patenteeritud või muul viisil kaitstud eseme või protsessiga. 2.3. Tellija tasub täitjale makseid kasutusrendis olevate seadmete eest iga kuu e-arvena. Täitjale on tagatud rendimaksete saamine riigihankes sätestatud renditavate seadmete miinimumkoguse ulatuses. 2.4. E-arve peab sisaldama vähemalt alljärgnevaid andmeid: 2.4.1. info e-arve esitaja kohta; 2.4.2. info maksja kohta; 2.4.3. hanke viitenumber; 2.4.4. hankelepingu number; 2.4.5. käibemaksukohustuslase number; 2.4.6. vastuvõetud toote nimetus (seerianumber) ja kirjeldus; 2.4.7. käibemaks; 2.4.8. kogusumma. 2.5. Tellija tasub seadmete eest arvel märgitud kuupäevaks. Maksetähtaeg ei tohi olla lühem kui 30 kalendripäeva. 2.6. Tellija ei tasu seadmete eest, mis ei ole lepingus ja lepingu lisades toodud tingimustel sihtotstarbeliselt kasutatavad. 2.7. Ettemakseid tellija ei teosta. 2.8. Tellija poolt makstud mistahes summa, mis ületab täitjale lepingus ettenähtu, maksab täitja tellijale tagasi 30 kalendripäeva jooksul pärast vastava teate saamist. VÕI 2.1. Lepingujärgne hind moodustub lepingu kehtivuse perioodil kasutusrendile antud seadmete ja süsteemi eest tasutavast kasutusrendi maksete hinnast, mis sisaldub pakkumuses. 2.2. Lepingujärgne hind on täitja ainuke tasu renditud seadmete, nende kohaletoomise, seadmete paigalduseks vajalike tööriistade, vajalike sideteenuste ja litsentside, tarkvara ja serverite paigalduse, hooldusteenuse, tugiteenuse ning koolituste eest. Täitjal ise ega tema töötajatel ei ole õigust täiendavale autori-, litsentsi- või muule sarnasele tasule seoses lepingu täitmisel kasutatud patenteeritud või muul viisil kaitstud eseme või protsessiga. 2.3. Tellija tasub täitjale makseid kasutusrendis olevate seadmete eest iga kuu arvena. Täitjale on tagatud rendimaksete saamine riigihankes sätestatud renditavate seadmete miinimumkoguse ulatuses. 2.4. Arve esitatakse käibemaksuta („pöördmaksustamine“). 2.5. Arve peab sisaldama vähemalt alljärgnevaid andmeid: 2.5.1. info arve esitaja kohta; 2.5.2. info maksja kohta; 2.5.3. hanke viitenumber; 2.5.4. hankelepingu number; 2.5.5. käibemaksukohustuslase number; 2.5.6. vastuvõetud toote nimetus (seerianumber) ja kirjeldus; 2.5.7. summa. 2.6. Tellija tasub seadmete eest arvel märgitud kuupäevaks. Maksetähtaeg ei tohi olla lühem kui 30 kalendripäeva. 2.7. Tellija ei tasu seadmete eest, mis ei ole lepingus ja lepingu lisades toodud tingimustel sihtotstarbeliselt kasutatavad. 2.8. Ettemakseid tellija ei teosta. 2.9. Tellija poolt makstud mistahes summa, mis ületab täitjale lepingus ettenähtu, maksab täitja tellijale tagasi 30 kalendripäeva jooksul pärast vastava teate saamist. 3. Informatsioon ja aruanded 3.1. Täitja loetakse asukohaga ja lepingu tingimustega tutvunuks. Eelkõige ei rahuldata täitja nõuet lisamakseteks või ajapikenduseks, kui ta oleks saanud vajaliku informatsiooni hankida visiidiga asukohta, konsulteerides tellijaga või muul sobilikul viisil. 3.2. Niipea kui võimalik, varustab tellija täitjat tema käsutuses oleva mistahes informatsiooni ja dokumentatsiooniga, mis võib olla lepingu täitmisel oluline. 3.3. Tellija abistab täitjat nii palju kui võimalik lepingusse puutuva informatsiooni saamisel, mida täitja mõistlikkuse piirides lepingu täitmiseks nõuda võib. 3.4. Täitja annab tellijale viimase nõudmisel igal ajal lepingu täitmist (sealhulgas seadmeid, süsteemi ja rakendust) puudutavat informatsiooni. 4. Seadmete ja süsteemi üleandmise tingimused 4.1. Täitja peab töökorras seadmed ja süsteemi üle andma lepingu eritingimustes märgitud tähtajal tellija määratud asukohas. 4.2. Tellija allkirjastab üleandmise-vastuvõtu akti, kui süsteem töötab hankedokumentides ja pakkumuses kirjeldatud funktsionaalsuses, esimene seadmete tellimus on täidetud ning esmase väljaõppe koolitus on läbi viidud. 4.3. Üleandmise-vastuvõtu aktis näidatakse ära üleandmise kuupäev ning tarnitud seadmete detailiseeritud nimekiri. 4.4. Lepingu kehtivuse perioodil juurde tellitud seadmed tuleb tarnida 60 päeva jooksul alates tellimuse saamisest ning seadmed võetakse igakordselt vastu üleandmise-vastuvõtu akti vastu. 4.5. Tellija testib hankemenetluse kestel 6 (kuute) seadet ja eeldab lepingu kehtivuse perioodi jooksul tarnitud seadmete vastavust lepingutingimustele. Vastuvõtmine ei tähenda tellija kinnitust seadmete nõuetelevastavuse kohta ega mõjuta täitja kohustust täita kõiki lepingus ettenähtud kohustusi. 4.6. Seadmeid ja süsteemi on volitatud vastu võtma ning vastuvõtmisega seonduvaid dokumente allkirjastama lepingu eritingimuste punktis 6.1.1 nimetatud tellija esindaja. 4.7. Täitja informeerib eelnevalt tellijat seadmete tarnimise täpsest ajast. Tarneaeg ei tohi ületada lepingus sätestatud tähtaegu. 4.8. Pooled peavad informeerima teist poolt viivitusest või viivituse sattumise ohust ja põhjustest koheselt. 4.9. Juhusliku hävimise või kahjustumise risk läheb tellijale üle lepingu objektiks oleva seadme üleandmisel, samuti hetkel, mil tellija satub viivitusse toimingu tegemisega, millega ta seadme üleandmisele peab kaasa aitama. Täitjale läheb juhusliku hävimise või kahjustumise risk üle hetkest, mil tellija on seadme täitjale üle andnud, sh täitja esindajana tegutseva kullerfirmale üle andnud. 5. Seadmete ja süsteemi vastavus lepingutingimustele 5.1. Seadmete ja süsteemi kvaliteet ja kogus peab vastama kokkulepitud tingimustele, sealhulgas hanke alusdokumentides sätestatud nõuetele ning rahvusvahelistele standarditele. 5.2. Seadmete ja süsteemi vastavus punktis 5.1. kehtestatud tingimustele tõestatakse sertifitseeritud labori kinnituse või mõne teise dokumendiga, mis antakse üle tellijale. 6. Garantii 6.1. Täitja annab seadmetele lepingu kehtivuse perioodiks garantii. 6.2. Garantiiperiood hakkab kulgema alates esimeses tellimuses tarnitud seadmete vastuvõtu akti allkirjastamisest tellija poolt ja lõppeb lepingu kehtivuse perioodi lõppemisel. 6.3. Garantiiperioodil ilmnevad puudused kõrvaldab täitja omal kulul. 6.4. Täitja kõrvaldab garantiiperioodil ilmnenud puudused 3 päeva jooksul puudusest teada saamisest. 6.5. Juhul kui garantiiperioodil ilmnenud puudused muudavad osa või kõik seadmed kasutamiskõlbmatuks, varustab täitja tellijat nõutud tasemel toimimise garanteerivate asendusseadmete ja muu vajalikuga omal kulul. 6.6. Tellija informeerib täitjat puuduse iseloomust ja ulatusest otsekohe selle ilmnemisel. Täitja on kohustatud eemaldama ilmnenud puudused vastavalt lepingus toodule või tellija poolt määratud ajal. 6.7. Kui 30% mis tahes partii seadmetest ei tööta, eeldatakse, et kogu seadmete partii on vigane ja täitja kohustub selle omal kulul ümber vahetama 5 päeva jooksul. 6.8. Kui täitja viivitab ettenähtud kohustuste täitmisega rakendatakse lepingu punkti 8 sätteid. 7. Teated ja kirjavahetus 7.1. Teadete edastamine toimub telefoni või e-posti teel lepingus märgitud poolte kontaktandmetel. Kontaktandmete muutusest on pool kohustatud viivitamatult teist poolt teavitama. 7.2. Pooltevahelised lepinguga seotud teated peavad olema kirjalikku taasesitamist võimaldavas vormis, välja arvatud juhtudel, kui teated on informatsioonilise iseloomuga, mille edastamisel teisele poolele ei ole õiguslikke tagajärgi. Teade loetakse kättesaaduks, kui: 7.2.1. teade on üle antud allkirja vastu; 7.2.2. e-posti või telefoni teel saadud teate saamist on kinnitatud e-posti teel. 8. Poolte vastutus lepingu rikkumisel 8.1. Lepingust või seadusest tuleneva õiguse või õiguskaitsevahendi mittekasutamine või selle kasutamisega viivitamine ei tähenda nimetatud õigusest või õiguskaitsevahendist või muudest õigustest või õiguskaitsevahenditest loobumist. Lepinguga seotud mis tahes loobumised on kehtivad ainult siis, kui need on selgesõnaliselt ja kirjalikult väljendatud. 8.2. Pooled vastutavad lepinguga võetud kohustuste täitmata jätmise või mittekohase täitmise eest Eesti Vabariigi õigusaktides ning lepingus ettenähtud korras. 8.3. Juhul, kui tellija viivitab lepingust tulenevate rahaliste kohustuste täitmisega, on täitjal õigus nõuda viivist 0,15% päevas tähtaegselt tasumata summast iga viivitatud päeva eest. 8.4. Juhul, kui täitja ei tarni tellimuskirja kohaseid seadmeid tellijale õigeaegselt, on tellijal õigus nõuda iga hilinenud seadme eest leppetrahvi vastava seadme rendipäeva maksumuse kahekordses ulatuses iga viivitatud päeva eest. 8.5. Kui täitja ei ole töökorras seadmeid ja süsteemi tellijale üle andnud lepingu eritingimuste punktis 2.1 sätestatud tähtpäevaks, on tellijal õigus nõuda täitjalt leppetrahvi 500 eurot iga viivitatud päeva eest. 8.6. Oluliseks lepingurikkumiseks loetakse muuhulgas järgmised juhud: 8.6.1. pool rikkus kohustust tahtlikult või raske hooletuse tõttu; 8.6.2. täitja hilineb oma lepingujärgsete kohustuste täitmisega rohkem kui 30 kalendripäeva; 8.6.3. täitja ei kõrvalda puudusi või viivitab nende kõrvaldamisega rohkem kui 30 kalendripäeva; 8.6.4. täitja suhtes on algatatud pankrotimenetlus, pankrot on välja kuulutatud, täitja varad arestitakse või täitja finantsseisund halveneb tellija põhjendatud hinnangul oluliselt ja see halvenemine muudab vähetõenäoliseks lepingu nõuetekohase täitmise; 8.6.5. täitja ei saa lepingu täitmiseks vajalikku luba või litsentsi; 8.6.6. täitja annab oma lepingujärgsed kohustused üle kolmandatele isikutele ilma teise poole sellekohase selgesõnalise kirjaliku nõusolekuta; 8.6.7. pool on rikkunud konfidentsiaalsusnõuet ja/või isikuandmete töötlemisega seotud nõudeid; 8.6.8. pool on rikkunud avalikustamise keelu kohustust. 8.7. Poolel on õigus nõuda lepingu olulise rikkumise korral leppetrahvi kuni 50 000 eurot. Tellijal on õigus käesolevas punktis nimetatud leppetrahv kinni pidada täitjale tasumisele kuuluvatest summadest. Leppetrahvi nõude esitamine ei võta poolelt õigust nõuda tekitatud kahju hüvitamist või kasutada muid seadusest tulenevaid õiguskaitsevahendeid. 8.8. Leppetrahvide ja viiviste kogumaksumus ei tohi ületada lepingu hinda, välja arvatud juhul, kui pool rikkus kohustust tahtlikult või raske hooletuse tõttu. 8.9. Pooled peavad informeerima teist poolt viivitusest või viivituse sattumise ohust ja põhjustest koheselt. 8.10. Poolel on õigus leping erakorraliselt üles öelda, kui teine pool rikub oluliselt lepingu tingimusi ega ole rikkumist lõpetanud teates märgitud tähtaja jooksul. 8.11. Tellijal on õigus leping korraliselt üles öelda, kui võetakse vastu õigusakt, millega muudetakse elektroonilise valve täitmise korda, ulatust või viisi selliselt, et käesoleva lepingu esemeks olevate seadmete ja süsteemi kasutusrent muutub tellija jaoks ebavajalikuks. Tellija peab lepingu ülesütlemisest täitjale ette teatama 6 (kuus) kuud. Täitjal ei teki tellija vastu lepingu lõpetamisest tekkinud kahju hüvitamiste nõuet, mh saamata jäänud tulu. 9. Lepingujärgsete kohustuste peatumine 9.1. Tellija võib peatada täitjale lepingujärgselt makstavate summade maksmise kas osaliselt või täielikult, kui: 9.1.1. täitja ei täida lepingut; 9.1.2. rendiperioodil avastatakse puudusi või muid täitjapoolseid kohustuste rikkumisi; 9.1.3. tellija lepingujärgsete kohustuste õigeaegset ja korrektset täitmist segab või ähvardab segada muu asjaolu, mille eest vastutab täitja. 9.2. Täitja võib peatada tellijale lepingujärgsete kohustuste täitmise kas osaliselt või täielikult, kui: 9.2.1. tellija ei täida lepingut; 9.2.2. täitja lepingujärgsete kohustuste õigeaegset ja korrektset täitmist segab muu asjaolu, mille eest vastutab tellija. 10. Dokumentatsioon 10.1. Täitja varustab tellijat piisava ja adekvaatse dokumentatsiooniga kõigi elektroonilise jälgimissüsteemi aspektide kohta, kaasa arvatud seadmete ja rakenduse kasutusjuhendid. 10.2. Kogu dokumentatsioon peab olema kättesaadav digitaalsel kujul. 11. Koolitus 11.1. Täitja peab tegema eestikeelse esmase väljaõppe koolituse süsteemi kasutavale personalile Eestis, Tallinnas. 11.2. Täitja peab tegema lepingu kehtivuse perioodil täiendkoolitusi vastavalt hankedokumentides sätestatule ja tellija vajadusele. 12. Hooldus- ja tugiteenus 12.1. Täitja osutab hooldus- ja tugiteenust, vastavalt lepingus ja nimetatu lisades toodule. 12.2. Täitja peab ilma lisatasuta pakkuma tellijale välja iga uue tarkvaraversiooni. 12.3. Täitja peab lepingu ajal tagama, et kõik süsteemi osad ja tarkvara omab ametlikku tootetuge. 12.4. Täitja tagab, et kõik süsteemi turvauuendused paigaldatakse 48 tunni jooksul nende avaldamisest. 12.5. Täitja peab tellija nõudel vastavalt lepingu lisa 3 nõudele 15 esitama 5 tööpäeva jooksul kirjaliku tõrgete analüüsi ja seadmete, tarkvara, püsivara või muu vajaliku parandatud versiooni. 12.6. Täitja peab pakkuma tehnilist tuge tööpäevadel 8:00-18:00, vastavalt tellija vajadusele ja lepingu lisades toodud reageerimisaegadele. Suhtlemine peab toimuma eesti või inglise keeles. 13. Uued versioonid ja redaktsioonid 13.1. Uute versioonide ja redaktsioonide kasutusele võtmise tingimused on kirjeldatud lepingu lisades. 14. Load ja litsentsid 14.1. Täitja vastutab ainuisikuliselt lepingu täitmiseks vajalike lubade ja litsentside saamise eest. Tellija teeb täitjaga mõistliku koostööd, hoidmaks ära selliste lubade või litsentside väljaandmise asjatut viivitamist või väljaandmisest keeldumist. 14.2. Tellija võib ilma ette teatamata lepingu lõpetada, kui täitja ei saa lepingu täitmiseks vajalikku luba või litsentsi. 14.3. Täitja garanteerib, et tal on õigus anda tellijale lepingu objektiks oleva tarkvara ja teiste autori- või muude sarnaste õigustega kaitstavate esemete kasutamisõigus. 14.4. Täitja garanteerib, et tellijale toote kasutamiseks antava litsentsi üleandmisega ei rikuta kolmandate isikute õigusi. Juhul kui kolmas isik esitab oma õiguste rikkumise tõttu tellija vastu hagi ning see rahuldatakse, tasub täitja võimalikud kahjuhüvitusnõuded, samuti advokaaditasud ja muud kohtumenetlusega seonduvad kulud. 15. Kolmandad isikud 15.1. Pooled võivad loovutada lepingust tulenevaid rahalisi nõudeid kolmandatele isikutele. Kolmas isik on füüsiline või juriidiline isik või riigi- või kohaliku omavalitsuse asutus, kes ei ole tellija, täitja ega Justiitsministeerium. Pooled on kohustatud teineteist nõude loovutamisest viivitamatult kirjalikult informeerima. 15.2. Pooled ei või oma lepingujärgseid kohustusi anda üle kolmandale isikule ega kaasata oma lepingujärgsete kohustuste täitmiseks kolmandat isikut ilma teise poole sellekohase selgesõnalise kirjaliku nõusolekuta. 15.3. Pooled vastutavad kõigi isikute eest, keda nad kasutavad oma lepingujärgsete kohustuste täitmisel. 16. Konfidentsiaalsus ja isikuandmed 16.1. Pooled tagavad lepingueelsete läbirääkimiste ja lepingu täitmise käigus üksteiselt ükskõik mis vormis saadud teabe (sh andmed, isikuandmed, know-how) konfidentsiaalsuse ja ei anna seda edasi ega võimalda sellele teabele juurdepääsu kolmandatele isikutele ilma teise poole sellekohase selgesõnalise kirjaliku nõusolekuta. 16.2. Täitja kohustub mitte edastama lepingueelsete läbirääkimiste ja lepingu täitmise käigus ükskõik mis vormis saadud teavet (sh andmed, isikuandmed, know-how) väljapoole Euroopa Liidu liikmesriikide ja Euroopa Majandusühendusse kuuluvate riikide territooriumit ilma teise poole sellekohase selgesõnalise kirjaliku nõusolekuta. 16.3. Lepingus sätestatud konfidentsiaalsuse nõue ei laiene teabe avaldamisele poolte audiitoritele ja advokaatidele. Enne teabe avaldamist on pool kohustatud teist poolt avaldamise kavatsusest teavitama. 16.4. Täitja kasutab ja töötleb lepingueelsete läbirääkimiste ja lepingu täitmise käigus saadud konfidentsiaalset teavet üksnes lepingu täitmiseks. Täitja kohustub lepingu lõppemisel andma tellijale üle kõik lepinguperioodi jooksul kogutud andmed ja logid jälgitavate ning süsteemi kõikide kasutajate kohta ja kustutama andmed ja nimetatute koopiad 5 tööpäeva jooksul, v.a juhul, kui õigusaktidest tuleneb teisiti. 16.5. Pooled võimaldavad juurdepääsu konfidentsiaalsele teabele ainult nendele isikutele, kellel on selleks oma tööülesannete täitmiseks vajadus ning tagavad, et need isikud on teadlikud ja järgivad isikuandmete töötlemisalaseid nõudeid ja õigusakte, nad on saanud asjakohase koolituse eelnimetatud nõuete kohta, on võtnud endale konfidentsiaalsuskohustuse või neile kehtib asjakohane seadusest tulenev konfidentsiaalsuskohustus. 16.6. Pooled täidavad kõiki kehtivaid isikuandmete töötlemisalaseid nõudeid, andmete turvalisust puudutavaid ning isikuandmete kaitse alaseid Euroopa Liidu ja Eesti Vabariigi õigusakte ja muid eeskirju. 16.7. Täitja kohustub rakendama järgmisi organisatsioonilisi, füüsilisi ja infotehnilisi turvameetmeid teabe kaitseks juhusliku või tahtliku volitamata muutmise; juhusliku hävimise ja tahtliku hävitamise eest ning õigustatud isikule andmete kättesaadavuse takistamise eest, volitamata töötlemise, s.h. avalikustamise eest: 16.7.1. vältima kõrvaliste isikute ligipääsu isikuandmete töötlemiseks kasutatavatele seadmetele; 16.7.2. ära hoidma andmete omavolilist lugemist, kopeerimist ja muutmist andmetöötlussüsteemis, samuti andmekandjate omavolilist teisaldamist; 16.7.3. ära hoidma isikuandmete omavolilist salvestamist, muutmist ja kustutamist ning tagama, et tagantjärele oleks võimalik kindlaks teha, millal, kelle poolt ja milliseid isikuandmeid salvestati, muudeti või kustutati või millal, kelle poolt ja millistele isikuandmetele andmetöötlussüsteemis juurdepääs saadi; 16.7.4. tagama, et igal andmetöötlussüsteemi kasutajal oleks juurdepääs ainult temale töötlemiseks lubatud isikuandmetele ja temale lubatud andmetöötluseks; 16.7.5. tagama andmete olemasolu isikuandmete edastamise kohta: millal, kellele ja millised isikuandmed edastati, samuti selliste andmete muutusteta säilimise; 16.7.6. tagama, et isikuandmete edastamisel andmesidevahenditega ja andmekandjate transportimisel ei toimuks isikuandmete omavolilist lugemist, kopeerimist, muutmist või kustutamist; 16.7.7. pidama arvestust isikuandmete töötlemisel kasutatavate tema kontrolli all olevate seadmete ja tarkvara üle, dokumenteerides järgmised andmed: 1) seadme nimetus, tüüp ja asukoht ning seadme valmistaja nimi; 2) tarkvara nimetus, versioon, valmistaja nimi ja kontaktandmed. 16.8. Täitja kohustub lepingu teist poolt teavitama toimunud või põhjendatult kahtlustatavast punktis 16.1 ja/või 16.2 sätestatud konfidentsiaalsuskohustuse rikkumisest ning punktis 16.7 sätestatud turvameetmete rikkumisest, mis põhjustab, on põhjustanud või võib põhjustada edastatavate, salvestatud või muul viisil töödeldavate isikuandmete juhusliku või ebaseadusliku hävitamise, kaotsimineku, muutmise või loata avalikustamise või neile juurdepääsu, kirjalikku taasesitamist võimaldavas vormis ilma põhjendamatu viivituseta. Teates tuleb vähemalt: a) kirjeldada (Isikuandmetega seotud) rikkumise laadi, sealhulgas puudutatud andmesubjektide liike ja arvu ning puudutatud kirjete liike ja arvu; b) teatada andmekaitse töötaja ja tema kontaktandmed või muu kontaktpunkt, kust saab lisateavet; c) soovitada meetmeid (Isikuandmetega seotud) rikkumise võimalike negatiivsete mõjude leevendamiseks; d) kirjeldada (isikuandmetega seotud) rikkumise tõttu andmesubjektidele tekkivaid tagajärgi ja potentsiaalseid ohte; e) kirjeldada teenusepakkuja/või kolmandast isikust alltöötleja poolt välja pakutud või võetud meetmeid (isikuandmetega seotud) rikkumisega tegelemiseks ja f) esitada muud teavet, mis on mõistlikult nõutav, et vanglad saaksid täita kohaldatavaid andmekaitse õigusakte, sealhulgas riigiasutustega seotud teavitamise ja avaldamise kohustusi, näiteks teavet, mis on nõutav andmesubjekti tuvastamiseks. 16.9. Täitja kohustub tellija nõudmisel lõpetama punktis 16.8 nimetatud rikkumise ja kohaldama meetmeid isikuandmetega seotud rikkumise lahendamiseks, sh vajaduse korral rikkumise võimaliku kahjuliku mõju kõrvaldamiseks või leevendamiseks. 16.10. Käesolevas lepingu punktis sätestatud konfidentsiaalsuskohustuse nõue on tähtajatu ning kehtib nii lepingu täitmise ajal kui ka pärast lepingu lõppemist. 16.11. Täitja kohustub tegema tellijale kättesaadavaks kogu teabe, mida tellija peab vajalikuks käesolevas punktis sätestatud kohustuste täitmise tõendamiseks. 16.12. Täitja kohustub võimaluse piires asjakohaste tehniliste ja korralduslike meetmete abil aitama tellijal täita kohustust vastata taotlustele andmesubjekti õiguste teostamiseks ning teostada nende õiguste teostamisest tulenevaid toiminguid (andmete parandamine, sulgemine, kustutamine). 16.13. Tulenevalt konfidentsiaalse informatsiooni laadist on tellijal õigus seada täiendavaid nõuded ja/või juhised isikuandmete töötlemiseks. 16.14. Kõik eelnimetatud kohustused kehtestab täitja kõikidele kolmandatele isikutele, keda ta kasutab oma lepingujärgsete kohustuste täitmisel. 17. Avalikud suhted 17.1. Täitja ei tegele seoses lepinguga avalike suhetega ega anna teateid pressile, elektroonilisele meediale, üldsusele või teistele auditooriumidele, välja arvatud teise poole eelneval kirjalikul nõusolekul. Avaldada võib vaid teateid, mis on teise poolega eelnevalt kooskõlastatud. 17.2. Kõik eelnimetatud kohustused kehtestab Täitja ka kõigile kolmandatele isikutele, keda ta kasutab oma lepingujärgsete kohustuste täitmisel. 18. Vääramatu jõud 18.1. Lepingust tulenevate kohustuste mittetäitmist või mittenõuetekohast täitmist ei loeta Lepingu rikkumiseks, kui selle põhjuseks oli vääramatu jõud. Vääramatu jõuna käsitlevad pooled võlaõigusseaduse §-s 103 lg 2 nimetatud asjaolusid. 18.2. Pool, kelle tegevus lepingujärgsete kohustuste täitmisel on takistatud vääramatu jõu asjaolude tõttu, on kohustatud sellest koheselt kirjalikult teatama teisele Poolele, esitades teavitusega ühes tõendid kõigi järgnevate asjaolude esinemise kohta: 18.2.1. takistava asjaolu esinemine, mis takistab kohustuse kohast täitmist; 18.2.2. takistava asjaolu asetsemine väljaspool võlgniku mõjusfääri; 18.2.3. asjaolu ettenägematus; 18.2.4. asjaolu vältimatus ja ületamatus. 18.3. Vääramatu jõu asjaolude ilmnemisel pikeneb Lepingu lõpptähtaeg nimetatud asjaolude esinemise perioodi võrra. Pool peab vääramatu jõu asjaolude äralangemisel Lepingut täitma asuma. Kui vääramatu jõu asjaolude tõttu on Poole Lepingust tulenevate kohustuste täitmine takistatud enam kui 60ne kalendripäeva võrra võib teine Pool öelda lepingu üles. 19. Lepingu muutmine ja täiendamine 19.1. Lepingut võib muuta poolte kirjalikul kokkuleppel. Muudatused jõustuvad pärast nende allkirjastamist mõlema poole poolt või poolte poolt määratud tähtajal. Kirjaliku vormi mittejärgimisel on muudatused tühised. 19.2. Riigihangete seaduse § 123 lg 1 p 1 kirjeldatud muudatused lepitakse kokku Tellija ja Täitja esindajate poolt kirjalikku taasesitamist võimaldavas vormis. 20. Kehtiv seadusandlus 20.1. Lepingule ning kõikidele lepingu osaks olevatele dokumentidele kohaldatakse Eesti Vabariigi õigusakte. 21. Vaidluste lahendamine 21.1. Lepinguga seotud või sellest tulenevate arusaamatuste või vaidluste puhul ja eeldusel, et mõlemad pooled on sellest kirjalikult teatanud, püüavad pooled leida lahenduse läbirääkimiste teel. 21.2. Läbirääkimiste tulemusel kokkuleppe mittesaavutamisel lahendatakse vaidlused Harju Maakohtus. Annex 4 to the supporting documents of the public procurement “Operating lease of GPS based electronic surveillance equipment” (reference number 249700) SPECIAL TERMS AND CONDITIONS OF THE PROCUREMENT CONTRACT ........................, registry code ............, located in ............, Tallinn ............, represented by ............ on the basis of ............ ............ (hereinafter referred to as the Contracting Authority) and ........................, registry code ............, located in ............, Tallinn ............, represented by ............ on the basis of ............ ............ (hereinafter referred to as the Contractor), hereinafter individually referred to as a ‘Party’ or collectively as the ‘Parties’, have entered into this Procurement Contract (hereinafter ‘Contract’) in the following: 1. Object of the Contract 1.1. The object of the Contract is the rental of active tracking (GPS-based) surveillance equipment for monitoring of convicted and arrested prisoners (hereinafter referred to as the Equipment) and a comprehensive integrated software and hardware solution, including all necessary communication services and licences (hereinafter referred to as the System), and the provision of software and server installation, maintenance service, support services and training, in accordance with the provisions of the supporting documents of the public procurement “Operating lease of GPS based electronic surveillance equipment” (reference number 249700) and this Contract. 1.2. The rental period of the Equipment and the System is 48 months, which can be extended by up to 5 months if there is a justified need of the Contracting Authority. The Contracting Authority will provide a notice to that effect no later than 90 days before the original end date of the rental period. 1.3. Under the Contract, the operating lease will be provided for 20 to 80 devices, according to the Contracting Authority's request. 1.4. The Parties confirm that they will make every effort to achieve the objectives of the Contract under the conditions and to the extent established in this Contract and related legislation. 2. Ordering procedure 2.1. The first order is 50 devices according to the supporting documents of the public procurement “Operating lease of GPS based electronic surveillance equipment” (reference number 249700). The Contractor must have handed over the Equipment and System in working order to the Contracting Authority no later than by February 2023 or 60 days after the signing of the Contract (if the Contract is signed later than November 2022). 2.2. In the future, the Equipment will be ordered through a needs-based approach in a format that can be reproduced in writing. Orders can be placed during the period of validity of the Contract. Orders are submitted by the Contracting Authority's contact person to the Contractor's contact person. The Equipment must be delivered within 60 days of placing the order. In the order will be indicated: 2.2.1.An increase or decrease in the amount of the Equipment on the operating lease in increments of 15 devices up to a maximum of 80 devices. 3. Price and payment terms 3.1. The contractual price is formed by the price of operating lease payments paid for the Equipment and the System granted during the period of validity of the Contract. The price of the operating lease includes the right to use the Equipment, delivery, tools for installing the Equipment, necessary communication services and licences, installation of software and servers, maintenance service, support service and training. 3.2. The Contracting Authority will pay the Contractor in accordance with the General Terms and Conditions laid down in the Contract. 4. Entry into force of the Contract 4.1. The Contract enters into force from the moment of signing thereof by both Parties and is valid until the fulfilment of contractual obligations. 4.2. The period of operating lease is 48 months, which can be extended by up to 5 months if there is a justified need of the Contracting Authority. The period of operating lease begins from the transfer of the Equipment and System to the Contracting Authority. The Equipment shall be returned at the end of the rental period within 60 days by signing the corresponding delivery and receipt act. The Equipment is returned in the location specified by the Contracting Authority in Estonia, without additional payments. The Contracting Authority must allow the Contractor to perform operations related to the return of the E0quipment during the return period. 5. Contract documents 5.1. The Contract consists of the Special Terms and Conditions and General Terms and Conditions of the Procurement Contract. Where the Special Terms and Conditions provide otherwise than in the General Terms and Conditions, the provisions of the Special Terms and Conditions will apply. 5.2. The supporting documents of the public procurement, the instruments of delivery and receipt, written notices between the Parties and any amendments to the Contract, as well as other Annexes will constitute an integral part of the Contract. 5.3. The Contract with Annexes 1 and 2 has been drawn up in Estonian and translated into English. If any provision of the English language version of the Contract conflicts with the corresponding wording in the Estonian version, the Estonian version will prevail. 5.4. Upon signing the Contract, the Contract will contain the following Annexes: 5.4.1.Annex 1 - General technical specification of the subject matter of the procurement; 5.4.2.Annex 2 - Terms and Conditions of Service Level (SLA); 5.4.3.Annex 3 - Equipment and System specifications and tender form; 5.4.4.Annex 4 - Tender. 5.5. If the contract documents are contradictory in their content and/or the information provided in them can be interpreted differently, the order of competence of the documents (the superior contract document is mentioned in the top of the list) is as follows: 5.5.1.Special terms and conditions of the procurement contract; 5.5.2.General terms and conditions of the procurement contract; 5.5.3.Technical specification; 5.5.4.The supporting documents of the public procurement; 5.5.5.Tender. 6. Contact details of the Parties 6.1. Contact details of the Contracting Authority 6.1.1.The Contracting Authority’s representative in signing receipt instruments of work, notices, and other documents related to the Contract is […] (telephone […]; email address […]). 6.1.2.The Contracting Authority’s contact person for supervising the performance of work and specifying the source information and work tasks necessary for the Contractor, etc. is […] (telephone […]; email address […]). 6.2. Contact details of the Contractor: 6.2.1.The representative of the Contractor is […] (telephone […]; email address […]). 6.2.2.The contact person of the Contractor is …………. (telephone: …………………… e-mail: ……). By signing this Contract, the Parties will certify that they have read and agree to the Contract and its Annexes and fully understand the content and consequences of the obligations assumed by themselves. Contracting Authority Contractor ………… ………… /signed digitally/ /signed digitally/ ………… ………… ………… ………… GENERAL TERMS AND CONDITIONS OF THE PROCUREMENT CONTRACT 1. Definitions 1.1. The following definitions will apply to both the Contract and the documents forming part of it: 1.1.1.Parties – the common name of the Contractor and the Contracting Authority. 1.1.2.Contract – the special and general terms and conditions of the procurement contract, including the Annexes. In the context of general terms and conditions, abbreviated to Contract. 1.1.3.Special Terms and Conditions – the special terms and conditions of the Contract shall be agreed on in the case of questions not specified in or regarding the General Terms and Conditions. The Parties may also agree on specifications differing from the General Terms and Conditions, but in the case of a lack thereof, the General Terms and Conditions shall apply. 1.1.4.General Terms and Conditions – the general terms and conditions of this Procurement Contract. Unless otherwise specified in the General Terms and Conditions, the clauses referred to in the General Terms and Conditions will mean the respective clauses of the General Terms and Conditions. 1.1.5.Supporting documents of the public procurement – documentation related to the procurement procedure carried out by the Contracting Authority in accordance with the Public Procurement Act. 1.1.6.Equipment – active tracking (GPS-based) surveillance equipment for monitoring of convicted and arrested prisoners. 1.1.7.Batch of the Equipment - a set of Equipment delivered by the Contractor to the Contracting Authority at the same time on the basis of the order. 1.1.8.System – a complete integrated software and hardware solution with all the necessary communication services and licences for electronic surveillance. 1.1.9.Application – an electronic monitoring application that allows you to exercise supervision over probationers. 1.1.10. Location – the location of the Contracting Authority or other agreed places, with the exception of the location of the Contractor where the Equipment or System is supplied or installed. 1.1.11. Deficiency and error - a deficiency or error occurs if the Equipment or System does not work or does not meet the conditions stipulated in the Contract or other supporting documents of the procurement. 1.1.12. Working day – a working day is a calendar day that is not either a Saturday, Sunday or a national holiday or a public holiday within the meaning of the Public Holidays and Days of National Importance Act. 1.1.13. Guarantee – the guarantee includes replacement or repair of low-quality or non-compliant equipment at the Contractor's expense and other activities specified in the contract and its appendices. 1.1.14. Maintenance and support service - maintenance and support service means work that ensures the performance of the Equipment and System (tidiness, integrity, performance, etc.), in accordance with the contract and its appendices. 2. Price and payment Choose the right alternative, first alternative for accounting entities in The Republic of Estonia and second alternative for accounting entities outside The Republic of Estonia. 2.1. The contractual price is formed by the price of operating lease payments to be paid for the Equipment and System provided for the operating lease during the period of validity of the Contract, which is included in the tender. 2.2. The contractual price is the Contractor's only fee for the rented Equipment, their delivery, the tools necessary for the installation of the Equipment, the necessary communication services and licences, the installation of software and servers, the maintenance service, support services and training. Neither the Contractor nor its employee will be entitled to any additional royalties or other similar remuneration in connection with a patented or otherwise protected object or process used in the performance of the Contract. 2.3. The Contracting Authority will make payments to the Contractor for the Equipment under operational lease every month as an e-invoice. The Contractor is guaranteed to receive rental payments in the amount of the minimum amount of rented Equipment specified in the public procurement. 2.4. The e-invoice must contain at least the following data: 2.4.1.information concerning the person submitting the invoice; 2.4.2.information concerning the payer; 2.4.3.procurement reference number; 2.4.4.procurement contract number; 2.4.5.VAT payer number; 2.4.6.name (serial number) and description of the product received; 2.4.7.VAT; 2.4.8.total amount. 2.5. The Contracting Authority pays for the Equipment by the date indicated on the invoice. The payment term cannot be shorter than 30 calendar days. 2.6. The Contracting Authority will not pay for the Equipment that is not usable for its intended purpose under the conditions specified in the contract and annexes. 2.7. The Contracting Authority will not make any prepayments. 2.8. Any amount, paid by the Contracting Authority, which exceeds the amount prescribed to the Contractor under the Contract, will be refunded to the Contracting Authority within 30 calendar days as of the receipt of a respective notice. OR 2.1. The contractual price is formed by the price of operating lease payments to be paid for the Equipment and System provided for the operating lease during the period of validity of the Contract, which is included in the tender. 2.2. The contractual price is the Contractor's only fee for the rented Equipment, their delivery, the tools necessary for the installation of the Equipment, the necessary communication services and licences, the installation of software and servers, the maintenance service, support services and training. Neither the Contractor nor its employee will be entitled to any additional royalties or other similar remuneration in connection with a patented or otherwise protected object or process used in the performance of the Contract. 2.3. The Contracting Authority will make payments to the Contractor for the Equipment under operational lease every month as an invoice. The Contractor is guaranteed to receive rental payments in the amount of the minimum amount of rented Equipment specified in the public procurement. 2.4. Invoice is submitted without VAT („reverse charge“). 2.5. The invoice must contain at least the following data: 2.5.1.information concerning the person submitting the invoice; 2.5.2.information concerning the payer; 2.5.3.procurement reference number; 2.5.4.procurement contract number; 2.5.5.VAT payer number; 2.5.6.name (serial number) and description of the product received; 2.5.7.amount. 2.6. The Contracting Authority pays for the Equipment by the date indicated on the invoice. The payment term cannot be shorter than 30 calendar days. 2.7. The Contracting Authority will not pay for the Equipment that is not usable for its intended purpose under the conditions specified in the contract and annexes. 2.8. The Contracting Authority will not make any prepayments. 2.9. Any amount, paid by the Contracting Authority, which exceeds the amount prescribed to the Contractor under the Contract, will be refunded to the Contracting Authority within 30 calendar days as of the receipt of a respective notice. 3. Information and reports 3.1. The contractor will be deemed to be familiar with the location and the terms and conditions of the contract. In particular, the contractor’s request for additional payments or extensions will not be satisfied if they could have obtained the necessary information by visiting the site, in consultation with the contracting authority or by any other appropriate means. 3.2. As soon as possible, the Contracting Authority will provide the Contractor with any information and documentation available to the Contracting Authority that may be important for the fulfilment of the Contract. 3.3. The Contracting Authority will assist the Contractor as far as possible in obtaining the information related to the Contract which the Contractor reasonably requires for the performance of the Contract. 3.4. The Contractor shall provide the Contracting Authority with information concerning the performance of the Contract (including the Equipment, System and Application) at any time at the request of the Contracting Authority. 4. Conditions for the transfer of the Equipment and System 4.1. The Contractor must deliver the Equipment and the System in working order within the term specified in the Special Terms and Conditions of the Contract at the location specified by the Contracting Authority. 4.2. The Contracting Authority signs the delivery and receipt act when the System works with the functionality described in the procurement documents and in the tender, the first order for the Equipment has been fulfilled and initial training has been carried out. 4.3. The instrument of delivery and receipt will indicate the date of delivery and a detailed list of the Equipment supplied. 4.4. The Equipment ordered during the validity period of the Contract must be delivered within 60 days of receiving the order and the Equipment will be accepted each time on the basis of the instrument of delivery and receipt. 4.5. The Contracting Authority will test 6 (six) devices during the procurement procedure and assume that the Equipment supplied during the validity period of the Contract will comply with the terms and conditions of the Contract. Receipt will not constitute confirmation by the Contracting Authority of the conformity of the Equipment and will not affect the Contractor's obligation to perform all the obligations stipulated in the Contract. 4.6. The representative of the Contracting Authority referred to in clause 6.1.1 of the Special Terms and Conditions of the Contract will be authorised to receive the Equipment and the System and to sign the documents related to the receipt. 4.7. The Contractor informs the Contracting Authority in advance of the exact time of delivery of the Equipment. The delivery time must not exceed the time limits specified in the Contract. 4.8. The Parties undertake to immediately inform each other regarding any delays or risk of delays and the reasons for the latter. 4.9. The risk of accidental destruction or damage will transfer to the Contracting Authority upon the delivery and receipt of the object of the Contract as well as from the moment when the Contracting Authority delays carrying out any actions needed to facilitate the delivery of the device. The risk of accidental destruction or damage passes to the Contractor from the moment the Contracting Authority has handed over the device to the Contractor, including to the courier company acting as the Contractor's representative. 5. Conformity of the equipment and the system with the terms and conditions of the Contract 5.1. The quality and quantity of the Equipment and the System must comply with the agreed conditions, including the requirements set out in the supporting documents of the procurement and international standards. 5.2. The compliance of the Equipment and the System with the conditions set out in clause 5.1 will be attested by confirmation of a certified laboratory or another document, which will be handed over to the Contracting Authority. 6. Guarantee 6.1. The Contractor provides a guarantee on the Equipment for the period of validity of the Contract. 6.2. The guarantee period starts from the moment the Contracting Authority signs the receipt instrument of the Equipment delivered in the first order and ends at the end of the validity period of the contract. 6.3. Deficiencies that occur during the guarantee period will be eliminated by the Contractor at its own expense. 6.4. The Contractor will eliminate the deficiencies revealed during the guarantee period within 3 days of becoming aware of the deficiency. 6.5. If the deficiencies revealed during the guarantee period make some or all of the Equipment unusable, the Contractor will provide the Contracting Authority with replacement equipment and other necessary equipment at its own expense that guarantees the required level of operation. 6.6. The Contracting Authority will inform the Contractor of the nature and extent of the deficiency immediately upon its occurrence. The Contractor is obliged to remove the deficiencies revealed in accordance with the Contract or at the time specified by the Contracting Authority. 6.7. If 30% of the Equipment in any batch does not work, it is assumed that the entire batch of the Equipment is faulty and the Contractor undertakes to replace it at its own expense within 5 days. 6.8. If the Contractor delays the fulfilment of the prescribed obligations, the provisions of clause 8 of the Contract are applied. 7. Notices and correspondence 7.1. Notices are sent by phone or e-mail using the contact details of the Parties specified in the Contract. A Party is obliged to immediately notify the other Party of any changes in contact details. 7.2. Notices between the Parties related to the Contract must be in a form that can be reproduced in writing, except for in cases where the notices are of an informational nature and the transmission of which to the other Party has no legal consequences. The notice will be deemed to have been received if: 7.2.1.the notice has been delivered against a signature; 7.2.2.receipt of notice via e-mail or telephone has been confirmed via e-mail. 8. Liability of the Parties upon breaching the Contract 8.1. Non-exercise or delay in the exercise of the right or legal remedy arising from the Contract or law does not constitute a waiver of such right or legal remedy or of any other right or legal remedy. Any waiver of this Contract will only be effective if they are expressed explicitly and in writing. 8.2. The Parties are liable for the non-performance or undue fulfilment of contractual obligations in accordance with the provisions specified in the legislation of the Republic of Estonia and in the Contract. 8.3. In the event that the Contracting Authority delays the performance of the financial obligations arising from the Contract, the Contractor has the right to demand a fine for a delay of 0.15% of the amount not paid on time per day for each day of delay. 8.4. If the Contractor fails to deliver the equipment according to the order letter to the Contracting Authority on time, the Contracting Authority has the right to demand a contractual penalty for each delayed device in the amount of twice the cost of the rental day of the respective equipment for each day of delay. 8.5. If the Contractor has not delivered the equipment in working order and the system to the Contracting Authority by the deadline specified in clause 2.1 of the Special Terms and Conditions of the Contract, the Contracting Authority has the right to demand a contractual penalty from the Contractor of EUR 500 for each day of delay. 8.6. A serious breach of the Contract will be considered, among others, in the following cases: 8.6.1.a Party violated the obligation intentionally or due to gross negligence; 8.6.2.the Contractor has delayed fulfilling their contractual obligations for over 30 calendar days; 8.6.3.the Contractor does not eliminate deficiencies or delays eliminating the latter for over 30 calendar days; 8.6.4.bankruptcy proceedings have been initiated against the Contractor, bankruptcy has been declared, the Contractor’s assets are seized or the Contractor’s financial situation deteriorates significantly in the reasonable opinion of the Contracting Authority, and this deterioration makes the proper performance of the Contract unlikely; 8.6.5.the Contractor does not obtain a permit or licence necessary for the performance of the Contract; 8.6.6.the Contractor transfers its contractual obligations to third parties without the express written consent of the other Party; 8.6.7.a Party has violated the requirements of confidentiality and/or the processing of personal data; 8.6.8.a Party has breached the obligation of non-disclosure. 8.7. A Party has the right to demand a contractual penalty of up to 50,000 euros in the case of a significant breach of the Contract. The Contracting Authority has the right to deduct the contractual penalty referred to in this clause from the amounts due to the Contractor. Filing a claim for a contractual penalty does not deprive the party of its right to demand compensation for damages or use other legal remedies arising from the law. 8.8. The total amount of contractual penalties and interest on arrears may not exceed the contractual price, except for in the case if a Party has breached an obligation intentionally or as a result of gross negligence. 8.9. The Parties undertake to immediately inform each other regarding any delays or risk of delays and the reasons for the latter. 8.10. A Party has the right to extraordinarily cancel the Contract if the other Party materially violates the terms and conditions of the Contract and has not completed the violation within the term specified in the notice. 8.11. The Contracting Authority has the right to cancel the Contract, if a legal act is adopted that changes the procedure, scope or manner of performing electronic surveillance in such a way that operating lease of the Equipment and System becomes unnecessary for the Contracting Authority. The Contracting Authority must notify the Contractor 6 (six) months in advance of the cancellation of the Contract. The Contractor will not have a claim against the Contracting Authority for the compensation for damage caused by the termination of the Contract, e.g., loss of profit. 9. Suspension of contractual obligations 9.1. The Contracting Authority may suspend the payment of all or part of the amounts due to the Contractor under the Contract if: 9.1.1.the Contractor fails to perform the Contract; 9.1.2.deficiencies or other breaches of obligations by the Contractor are detected during the lease period; 9.1.3.the timely and correct performance of the Contracting Authority’s contractual obligations is interfered with or threatened with interference by other circumstances for which the Contractor is liable. 9.2. The Contractor may suspend the fulfilment of contractual obligations partially or fully to the Contracting Authority if: 9.2.1.the contracting authority fails to perform the Contract; 9.2.2.the timely and due fulfilment of the Contractor’s contractual obligations is disrupted by another circumstance, for which the Contracting Authority is responsible. 10. Documentation 10.1. The Contractor shall provide the Contracting Authority with sufficient and adequate documentation on all aspects of the electronic monitoring system, including the instructions for use of the Equipment and the Application. 10.2. All documentation must be available in digital form. 11. Training 11.1. The Contractor must provide initial training in Estonian to the personnel using the System in Tallinn, Estonia. 11.2. During the validity period of the Contract, the Contractor must provide in-service training in accordance with the provisions of the procurement documents and the needs of the Contracting Authority. 12. Maintenance and support service 12.1. The Contractor provides maintenance and support services in accordance with the contract and its appendices. 12.2. The Contractor must offer each new software version to the Contracting Authority at no additional cost. 12.3. During the Contract, the Contractor must ensure that all parts of the System and the software have official product support. 12.4. The Contractor will ensure that all security updates to the System are installed within 48 hours of their publication. 12.5. At the request of the Contracting Authority, the Contractor must, in accordance with requirement 15 of Annex 3 to the Contract, provide a written error analysis and a revised version of the Equipment, software, firmware or other necessary repaired version within 5 working days. 12.6. The Contractor must provide technical support on working days between 8:00-18:00, according to the Contracting Authority's needs and the response times specified in the contract appendices. Communication must take place in Estonian or English. 13. New versions and revisions 13.1. The conditions for the introduction of new versions and revisions are described in the Annexes to the Contract. 14. Permits and licences 14.1. The Contractor is solely liable for obtaining the permits and licences required for the performance of the Contract. The Contracting Authority will cooperate reasonably with the Contractor in order to avoid unnecessarily delaying or refusing to issue such permits or licences. 14.2. The Contracting Authority may cancel the Contract without prior notification if the Contractor does not obtain the necessary permit or licence to perform the Contract. 14.3. The Contractor warrants that they have the right to provide the Contracting Authority with the right to use the software, which serves as the object of the Contract, and other items protected by copyright or similar rights. 14.4. The Contractor guarantees that no rights of third parties are breached by giving the Contracting Authority a licence for the use of the product. Should the third party file an action against the Contracting Authority for the violation of their rights and should the action be satisfied, the Contractor will pay all claims for the compensation of damage as well as attorney fees and other fees related to judicial proceedings. 15. Third parties 15.1. The Parties may assign financial claims arising from the Contract to third parties. A third party is a natural or legal entity or a state or local government agency that is neither the Contracting Authority nor the Contractor or the Ministry of Justice. The Parties are obligated to immediately inform each other in writing of the assignment of the claim. 15.2. The Parties may not transfer their contractual obligations to a third party or involve a third party in the performance of their relevant contractual obligations without the express written consent of the other Party. 15.3. The Parties are liable for all persons they use in the performance of their contractual obligations. 16. Confidentiality and personal data 16.1. The Parties will ensure the confidentiality of any information (including data, personal data, know- how) obtained from each other in the course of pre-contractual negotiations and the performance of the Contract and will not pass it on or grant access to this information to third parties without the express written consent of the other Party. 16.2. The Contractor undertakes not to forward any information (including data, personal data, know- how) obtained in the course of pre-contractual negotiations and performance of the Contract outside the territory of the Member States of the European Union and countries belonging to the European Economic Community without the express written consent of the other Party. 16.3. The confidentiality requirement set out in the Contract does not extend to the disclosure of information to the auditors and lawyers of the Parties. Before disclosing the information, a Party is obliged to inform the other Party of its intention to disclose. 16.4. The Contractor will only use and process the confidential information obtained during the pre- contractual negotiations and performance of the Contract for the performance of the Contract. Upon termination of the Contract, the Contractor undertakes to hand over to the Contracting Authority, all data and logs collected during the Contract period regarding the monitored users and all users of the System and to delete the data and copies of the aforementioned within 5 working days, unless otherwise provided by law. 16.5. The Parties will only allow access to confidential information to those persons who need it for the performance of their duties, and ensure that these persons are aware of and comply with the requirements and legislation on the processing of personal data, have received appropriate training on the above requirements, have undertaken a confidentiality obligation or are subject to an appropriate confidentiality obligation arising from law. 16.6. The Parties will comply with all applicable personal data processing requirements, data security and personal data protection legislation and other rules of the European Union and the Republic of Estonia. 16.7. The Contractor undertakes to implement the following organisational, physical, and IT security measures to protect the information in the case of accidental or intentional unauthorised modification, accidental and intentional destruction, and obstructing the access of data to the entitled person, unauthorised processing, including disclosure: 16.7.1. to prevent unauthorised persons from having access to the equipment used for processing personal data; 16.7.2. to prevent the unauthorised reading, copying, and modification of data in the data processing system, as well as the unauthorised transfer of data media; 16.7.3. to prevent the unauthorised storage, modification or deletion of personal data and to ensure that it is possible to establish a posteriori when, by whom, and which personal data have been stored, modified or deleted or when, by whom, and which personal data have been accessed in a data-processing system; 16.7.4. to ensure that each user of the data-processing system only has access to the personal data which they are authorised to process under their data processing permission; 16.7.5. to ensure the availability of data on the transfer of personal data: when, to whom, and what personal data were transferred, as well as the preservation of such data without changes; 16.7.6. to ensure that no unauthorised reading, copying, modification or deletion of personal data takes place during transfers of personal data by data communication equipment or during the transportation of data media; 16.7.7. to keep records of the equipment and software under their control and used for processing personal data, documenting the following information: 1) the name, type, and location of the equipment and the name of the manufacturer of the equipment; 2) the software name, version, manufacturer’s name, and contact details. 16.8. The Contractor undertakes to notify the other Party to the Contract of any breach of confidentiality obligations under clauses 16.1 and/or 16.2 and of any breach of security measures under clause 16.7 which has occurred or is reasonably suspected to have occurred and which causes, has caused or is likely to cause accidental or unlawful destruction, loss, alteration or unauthorised disclosure of, or access to, personal data transmitted, stored or otherwise processed, in a form that can be reproduced in writing without undue delay. In the notice, it is required at least: a) to describe the nature of the breach (relating to personal data), including the types and number of data subjects involved and the types and number of records involved; b) to refer to the data protection officer and provide their contact details, or any other contact point from which further information can be obtained; c) to recommend measures to mitigate the possible negative effects of the breach (relating to personal data); d) to describe the consequences and potential risks to data subjects due to the breach (relating to personal data); e) to describe the measures (relating to personal data) proposed or taken by the service provider and/or the third party sub-processor to address the violation; and f) to provide other information that is reasonably required to enable the prisons to comply with applicable data protection law, including information and publication obligations relating to public authorities, such as information required to identify the data subject. 16.9. At the request of the Contracting Authority, the Contractor undertakes to terminate the breach specified in clause 16.8 and apply measures to resolve the personal data breach, including, if necessary, to eliminate or mitigate the possible adverse effects of the breach. 16.10. The confidentiality obligation established in this Contract is for an indefinite period of time and is valid both during the performance of the Contract and after the termination of the Contract. 16.11. The Contractor undertakes to make all information that the Contracting Authority considers necessary to prove the fulfilment of the obligations set out in this clause available to the Contracting Authority. 16.12. As far as possible, the Contractor undertakes to assist the Contracting Authority, by means of appropriate technical and organisational measures, in compliance with the obligation to respond to requests for the exercise of the data subject's rights and to carry out the operations resulting from the exercise of those rights (correction, closure, deletion of data). 16.13. Due to the nature of confidential information, the Contracting Authority has the right to establish additional requirements and/or instructions for the processing of personal data. 16.14. The Contractor will establish all the above-mentioned obligations to all third parties used in the performance of its contractual obligations. 17. Public relations 17.1. The Contractor cannot engage in public relations in connection with the Contract nor provide information to the press, electronic media, public or other audience, except for upon the prior written consent of the other Party. It is only allowed to publish notifications, which have been coordinated with the other Party in advance. 17.2. The Contractor will also establish all the above-mentioned obligations to all third parties used in the fulfilment of its contractual obligations. 18. Force majeure 18.1. Non-performance or improper performance of obligations arising from the contract will not be deemed a violation of the contract if it was caused by force majeure. The parties will deem force majeure to be circumstances specified in § 103 (2) of the Law of Obligations Act. 18.2. A party, whose performance of its obligations under the contract is prevented by force majeure, shall immediately notify the other party thereof in writing, together with evidence of all the following circumstances: 18.2.1. the existence of an impediment to the proper performance of the obligation; 18.2.2. the existence of an obstacle outside the party’s control; 18.2.3. unforeseeable nature of the circumstances; 18.2.4. the inevitability and insurmountable nature of the circumstances. 18.3. Upon the emergence of force majeure circumstances, the end date of the contract shall be extended by the time period of the duration of the respective circumstances. When force majeure circumstances cease to exist, the party shall commence performing its contractual obligations. If, due to force majeure, the performance of the obligations of a party under the contract is prevented for more than 60 (sixty) calendar days, the other party may terminate the contract. 19. Amendment and supplementation of the Contract 19.1. The Contract may be amended upon written agreement between the Parties. Amendments enter into force after both parties have signed them or at any other time determined by the parties. If the written format obligation is not complied with, the amendments will be null and void. 19.2. The amendments described in clause § 123 (1) 1) of the Public Procurement Act will be agreed upon in a form that can be reproduced in writing by the representatives of the Contracting Authority and the Contractor. 20. Valid legislation 20.1. The Contract and all documents under the Contract are subject to legislation of the Republic of Estonia. 21. Settlement of disputes 21.1. In the case of any misunderstandings or disputes regarding or deriving from the Contract and provided that both Parties have notified each other of the latter, the Parties will attempt to resolve the dispute or misunderstanding by negotiations. 21.2. If an agreement is not reached as a result of negotiations, disputes will be settled in Harju County Court.
Allikas: Registrite ja Infosüsteemide Keskus dokumendiregister →
dokumendiregister.eeAsutusedEesti avalike dokumendiregistrite otsing · nimistu.ee andmetel